Microwave dewaxing applied to the investment casting process

Autoclave processing is commonly used nowadays for dewaxing in the investment casting process. However, since the use of microwave is steadily growing in industrial processes and the wax interacts with the electromagnetic energy of the microwaves, the present work studies the possibility of carrying out dewaxing via microwave. The wax (mineral wax, vegetable resin, low molecular-weight polymer and anti-oxidant) used in this work was prepared by melting in an oven equipped with a mineral oil bath. The chemical and structural stability of the wax were monitored throughout 12 simulated dewaxing cycles, via various analyses, namely, volumetric expansion, hardness, Fourier transform infrared spectroscopy, ultraviolet–visible spectrophotometry, differential scanning calorimetry and viscosity. The results showed that microwave dewaxing is viable, significantly decreasing the incorporation of dirt and water, which is inevitable in the autoclave dewaxing process.     

LPC总线和固件集线器

引言 　　ST最新推出的M50FW040固件集线器，采用了被称作‘低引脚数接口规范’或LPC的新主板互连协议。LPC总线是主板芯片组和单板外设功能之间的高速接口。……     

Innovation Clusters in Technological Systems: A Network Analysis of 15 OECD Countries for the Mid‐1990s

The paper aims to investigate how innovations cluster in different technological systems (TSs) when their “techno‐economic”, rather than “territorial” space, is considered. Innovation clusters of economic sectors are identified by referring to the innovation “potential” represented by their R&D expenditure and by applying social network analysis to the intersectoral R&D flows matrices of 15 OECD countries in the mid‐1990s. Different clusterization models are first tested in order to detect the way sectors group on the basis of the embodied R&D flows they exchange. Actual clusters are then mapped in the different TSs by looking for intersectoral relationships which can be qualified to constitute “reduced TSs” (ReTSs). In all the 15 TSs investigated the techno‐economic space appears organized in hierarchies, along which its constitutive sectors grouped into clusters with different density and composition. Once ReTSs are looked for, the 15 TSs display highly heterogeneous structures, but with some interesting similarity on the basis of which different clusters of TSs can be identified in turn.     

A Pharmacogenetics Study in Mozambican Patients Treated with Nevirapine: Full Resequencing of TRAF3IP2 Gene Shows a Novel Association with SJS/TEN Susceptibility

Steven–Johnson Syndrome (SJS) and Toxic Epidermal Necrolysis (TEN) are severe adverse drug reactions, characterized by extensive epidermal detachment and erosions of mucous membrane. SJS/TEN is one of the most serious adverse reactions to Nevirapine (NVP) treatment, commonly used in developing countries as first-line treatment of human immunodeficiency virus infection. In the last years TRAF3IP2 gene variants had been described as associated with susceptibility to several diseases such as psoriasis and psoriatic arthritis. We hypothesized that this gene, involved in immune response and in NF-κB activation, could also be implicated in the SJS/TEN susceptibility. We performed a full resequencing of TRAF3IP2 gene in a population of patients treated with NVP. Twenty-seven patients with NVP-induced SJS/TEN and 78 controls, all from Mozambique, were enrolled. We identified eight exonic and three intronic already described variants. The case/control association analysis highlighted an association between the rs76228616 SNP in exon 2 and the SJS/TEN susceptibility. In particular, the variant allele (C) resulted significantly associated with a higher risk to develop SJS/TEN (p = 0.012 and OR = 3.65 (95% CI 1.33–10.01)). A multivariate analysis by logistic regression confirmed its significant contribution (p = 0.027, OR = 4.39 (95% CI 1.19–16.23)). In conclusion, our study suggests that a variant in TRAF3IP2 gene could be involved in susceptibility to SJS/TEN.     

Industry–research co‐operation within and across regional boundaries. What does innovation policy add?

The paper aims to show how regional policy‐makers can stimulate firms' co‐operation with research organizations by granting an R&D subsidy. Using an original dataset for the Italian region of Emilia‐Romagna, propensity score matching is first applied to identify the impact of the subsidy received. A generalized propensity score technique is then employed to investigate the effect of an increasing amount of support. The firm's co‐operation is policy sensitive. The award of a subsidy to regional firms affects their intra‐regional more than their extra‐regional co‐operation. The propensity toward the latter appears subject to a monetary effect and is influenced by the amount of public funding received providing the subsidy overcomes a minimum threshold.     

Capacitance DNA bio-chips improved by new probe immobilization strategies

Label-free DNA detection plays a crucial role in developing point-of-care biochips. Capacitance detection is a promising technology for label-free detection. However, data published in literature often show evident time drift, large standard deviation, scattered data points, and poor reproducibility. To address these problems, mercapto-hexanol or similar alkanethiols are usually considered as blocking agents. The aim of the present paper is to investigate new blocking agents to further improve DNA probe surfaces. Data from AFM, SPR, florescence microscopy, and capacitance measurements are used to investigate new lipoate and ethylene-glycol molecules. The new surfaces offer further improvements in terms of diminished detection errors. Film structures are investigated at the nano-scale to justify the detection improvements in terms of probe surface quality. This study demonstrates the superiority of lipoate and ethylene-glycol molecules as blocking candidates when immobilizing molecular probes onto spot surfaces in label-free DNA biochip.     

Modulation on C‐ and N‐Terminal Moieties of a Series of Potent and Selective Linear Tachykinin NK2 Receptor Antagonists

Herein we describe the synthesis of a series of new potent tachykinin NK₂ receptor antagonists by the modulation of the C‐ and N‐terminal moieties of ibodutant (MEN 15596, 1 ). The N‐terminal benzo[b]thiophene ring was replaced by different substituted naphthalenes and benzofurans, while further modifications were evaluated at the C‐terminal tetrahydropyran moiety. Most compounds demonstrated a high affinity for the human NK₂ receptor and high in vitro antagonist potency, indicating that a wide range of substituents at both termini can be incorporated in the molecule without detrimental effects on the interactions with the NK₂ receptor. Selected compounds were tested in vivo confirming their activity as NK₂ antagonists. In particular, after both iv and id administration to guinea pig, compound 61 b was able to antagonize NK₂‐induced colonic contractions with a potency and duration‐of‐action fully comparable to the reference compound 1 (MEN 15596, ibodutant).     

A new sawing machine by diamond wire

Diamond wire is widely used for stone cutting; it is typically employed to extract a block in quarry and to square the block in a machining company. In particular, the frames to square or to cut the blocks present many technological limits, such as the high costs of the diamond wire, the frequent break of the diamond wire during cutting, the poor quality of cut surfaces, and the dangerous process and productivity lower than that of the same tool used in a quarry. The present work shows an innovative prototype machine to cut by a diamond wire which overcomes the aforementioned technological limits. The developed machine has a bridge frame among which two pulleys move the diamond wire as regards the stone block according with the feed speed. The diamond wire moves on the two pulleys with a cutting speed. A tensile force is applied to the wire that twists it during the contact with the stone, instead of keeping it along a straight direction parallel to the foundation of the machine. The twisting of the diamond wire makes the use of the wire itself more productive and safer, since the wear of each single bead during cutting is more uniform. Moreover, the resulting specific pressure acts on each bead along the arc of contact with the cut block and increases along the cutting direction from the entrance to the exit of the contact with the stone. The increasing of the specific pressure causes a bending of the diamond wire during the contact with the stone. The developed prototype was provided with a sensory system to measure both the cutting power and the tensile force of the diamond wire during experimental tests. In this way it was possible to verify the functionality of the prototype plant and, in the same time, to evaluate the productivity of the implemented cutting process.     

A One-Dimensional Model for Particulate Deposition and Hydrocarbon Condensation in Exhaust Gas Recirculation Coolers

Cooled exhaust gas recirculation (EGR) is widely used in diesel engines to control engine out NO_x (oxides of nitrogen) emissions. A portion of the exhaust gases is recirculated into the intake manifold of the engine after cooling it through a heat exchanger. EGR cooler heat exchangers, however, tend to lose efficiency and have increased pressure drop as deposit forms on the heat exchanger surface. This adversely affects the combustion process, engine durability, and emissions. In this study, a 1-D model was developed to simulate soot deposition, soot removal, and condensation of several hydrocarbon (HC) species in a circular tube with turbulent gas flow at constant wall temperature. The circular tube, which makes up the computational domain in the model, represents a single channel from any EGR cooler geometry. The model takes into account soot particle deposition due to thermophoresis, diffusion, turbulent impaction, and gravitational drift. However, thermophoresis was found to be the most dominant deposition mechanism for boundary conditions at which EGR coolers typically operate. Soot removal was modeled by considering a force balance between the drag and van der Waals forces. A lognormal distribution of particles was assumed at the tube inlet. The evolution of the particle distribution in the bulk flow along the tube as well as the mass distribution in the deposit layer on the tube walls is predicted by the model. Condensation of six HC species between C₁₅-C₂₄ alkanes was also modeled. Predictions made by the model are in reasonably good agreement with experimental data obtained from a laboratory reactor under the same boundary conditions. There are several assumptions and simplifications built into the model, which can be refined further to improve it.

Copyright 2012 American Association for Aerosol Research     

Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding

This work aims to evaluate the performance of glass/sisal hybrid composites focusing on mechanical (flexural and impact) and dynamic mechanical analyses (DMTA). Hybrid composites with different fiber loadings and different volume ratios between glass and sisal were studied. The effect of the fiber length has also been investigated. The densities of the composites were compared with the theoretical values, showing agreement with the rule of mixtures. The results obtained in the flexural and impact analysis revealed that, in general, the properties were always higher for higher overall reinforcement content. By DMTA, an increase in the storage and loss modulus was found, as well as a shift to higher values for higher glass loading and overall fiber volume. It was also noticed an increase in the efficiency of the filler and the calculated activation energy for the relaxation process in the glass transition region. The fiber length did not significantly change the results observed in all analyses carried out in this work. The calculated adhesion factor increased for higher glass loadings, meaning the equation may not be applied for the system studied and there are other factors, besides adhesion influencing energy dissipation of the composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010