Development of specimen and test method for strength analysis of MEMS micromirror

Specimens and fracture test methods for strength analysis of MEMS micromirrors were proposed. Bending and combined loading tests were performed, and torsion strength was estimated from those results. Two-parameter Weibull distribution was used to evaluate the fracture stresses estimated from the FEM model. The resulting scale and shape parameters were 787 MPa and 7.77 for the bending test and 517 MPa and 5.28 for the combined loading test. There was a difference in strength between the results of the bending and combined loading tests. From the load factor analysis, it was found that both geometry and stress distribution have to be considered to estimate the strength of MEMS since flaws are non-uniformly distributed. It was also found that torsional strength can be estimated on the safe side using the results of the combined loading test.     

Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Electron injection in "electron-only" devices based on a symmetric metal/silole/metal structure

We report on electron injection from two different metal electrodes into three silole derivatives, namely 2,5-di-(3-biphenyl)-1,1-dimethyl-3,4-diphenylsilacyclopentadiene (PPSPP), 1,2-bis(1-methyl-2,3,4,5,-tetraphenylsilacyclopentadienyl) ethane (2PSP) and 2,5-bis-(2', 2'-bipyridin-6-yl)-1, 1-dimethyl-3,4-diphenylsilacyclopentadiene (PyPySPyPy), previously employed as emissive and electron transport materials in molecular organic light-emitting diodes (MOLEDs). Silole films were sandwiched between symmetric Mg:Ag or bilayer CsF-Al electrodes. The steady-state current density-voltage characteristics were measured as a function of the silole layer thickness for the two cathodes. The trap-free space-charge-limited current based on time-of-flight measurements compared with the injected electron current for PyPySPyPy indicated that Mg:Ag contacts limit the injected current, while CsF-Al contacts behave as quasi-ohmic contacts. Similar findings were obtained for 2PSP and PPSPP allowing steady-state derived electron mobility parameters to be extracted. Based on space-charge-limited conduction analysis of the measured current-voltage characteristics, PyPySPyPy is found to be a superior electron transporting silole with approximately an order of magnitude higher electron mobility (2.0/spl times/10/sup -4/ cm/sup 2//Vs) compared with those of 2PSP (2.4/spl times/10/sup -5/ cm/sup 2//Vs) and PPSPP (5.2/spl times/10/sup -5/ cm/sup 2//Vs), which is significantly higher than that of the prototype electron transport material tris (8-hydroxyquinolinolato) aluminum (III) (Alq/sub 3/) (6.5/spl times/10/sup -7/ cm/sup 2//Vs) at 0.6 MV/cm.     

Field Investigation of Soil Heave by a Large Diameter Chilled Gas Pipeline Experiment, Fairbanks, Alaska

A large scale 105-m-long, 0.9-m-diam chilled pipeline experiment was conducted to assess the response of a production pipeline that transits between unfrozen (seasonally frozen) and permafrost soils in discontinuous permafrost regions. Thermal and heave characteristics of the experiment for a three-year monitoring period are reported. In response to the chilled pipeline, the progressive cooling patterns within the permafrost and unfrozen soils were different, resulting in the development of a thermal boundary at the transition zone between the two thermally different soils. The absolute maximum movement of pipeline was 0.197 m near the thermal boundary, resulting in a differential heave of 0.148 m. Three distinct heave phases were identified within the unfrozen soil. Phase 1 of the first 200 days related to penetration and heave above the groundwater table and was characterized by heave rates between 0.211 and 0.237 mm/day. Phase 2 resulted in increased ice segregation due to interaction of the freez-ing front with the groundwater table. This phase lasted from approximately day200 to day 500 and corresponded to a heave rate from 0.206 to 0.313 mm/day. Phase 3 was characterized by a further decrease in the heave rate to about 0.081 mm/day and lasted from approximately day 500 to day 1,056.     

VS‐CONTROL WITH TIME‐VARYING SLIDING SECTOR — DESIGN AND APPLICATION TO PENDULUM —

In general, a Variable Structure (VS) system is designed with a sliding mode. Recently a sliding sector, designed by an algebraic Riccati equation, has been proposed to replace the sliding mode for chattering‐free VS controllers. In this paper we extend the design algorithm for the sliding sector to a time‐varying sliding sector. The time‐varying sliding sector is defined by functions dependent on both state and time, hence time‐varying uncertainty can be considered. The VS controller is designed to stabilize an uncertain system, quadratically. The design procedure for real systems is introduced via an implementation to the control of “Furuta pendulum”. To enhance the stability it is necessary to compensate the time‐varying nonlinear static friction of the actuator adequately, hence this problem is a good example to demonstrate the performance of the proposed VS control method. In the experiment, it will be shown that the VS control with the time‐varying sliding sector is superior to an orthodox chattering‐free VS control.     

Progress in viewing‐angle properties of liquid‐crystal displays

Abstract— Viewing‐angle dependences of the contrast ratio and color shift of LCDs have been radically improved as evidenced by the increasing application of LCDs in high‐quality television. This paper describes the concept of optical compensation and the fundamental characteristics of the viewing‐angle property for various LC modes.     

Design and analysis of a pneumatic high-impact force drive mechanism for in-pipe inspection robots

A pneumatic actuator is suitable and safe for in-pipe inspection robots in inflammable circumstances because of its ability to withstand explosions. However, ordinary pneumatic actuators limit driving speed because of their slow response. In this paper, we propose a novel pneumatic drive mechanism that can produce a high-impact force to move the in-pipe robot forward with sufficient speed by a catastrophic phenomenon using rapid release between a magnet and springs. We also introduce an anisotropic friction mechanism that uses a self-locking phenomenon to transmit the impact force to the pipe walls efficiently. A pin retraction mechanism that releases the self-locking condition is applied to retrieve the robot from the pipes. Optimizations of the proposed design were conducted based on a motion simulation model and verified in experiments. The experimental results obtained for maximum driving speeds in a straight pipe with different material types were approximately 90 and 50 mm/s for horizontal and vertical pipes, respectively. Stable strokes were also observed at different driving frequencies from 0.5 to 2.0 Hz.     

Increased Synovial CD14 mRNA Expression and Proportion of CD14high Subsets in Early-Stage Hip Osteoarthritis: Propensity Matched Score Analysis

The pathophysiology of early-stage hip osteoarthritis (EOA) is not fully understood. Although a previous study in an age-unmatched cohort reported that the number of macrophages was increased in knee EOA compared to late OA (LOA), it remained unclear whether increased macrophages in EOA accurately reflect EOA pathology. We investigated the differences in CD14 expression levels between EOA and LOA using age-unmatched and -matched cohorts. Synovial tissues were obtained from 34 EOA (Tönnis grades 0 and 1) and 80 LOA (Tönnis grades 2 and 3) patients. To correct for differences in demographics between patients with LOA and EOA, we also created propensity score-matched cohorts (16 EOA and 16 LOA). CD14 expression and its association with pain was estimated in LOA and EOA before and after propensity matching. We performed flow cytometry on tissues from the 16 patients, with 8 from each group, to assess for CD14+ subsets in the cells. The CD14 expression in EOA was higher than that in LOA both before and after propensity matching. The proportion of CD14^high subsets in EOA was higher than that in LOA. The CD14 expression was associated with pain in EOA before matching. However, no difference was observed between the pain and CD14 expression after matching in EOA. The increased CD14 expression and the proportion of CD14^high subsets may be important features associated with hip EOA pathology. To accurately compare early and late OA, the analysis of a propensity score-matched cohort is necessary.     

Elevated Expression of CCN3 in Articular Cartilage Induces Osteoarthritis in Hip Joints Irrespective of Age and Weight Bearing

Osteoarthritis (OA) occurs not only in the knee but also in peripheral joints throughout the whole body. Previously, we have shown that the expression of cellular communication network factor 3 (CCN3), a matricellular protein, increases with age in knee articular cartilage, and the misexpression of CCN3 in cartilage induces senescence-associated secretory phenotype (SASP) factors, indicating that CCN3 promotes cartilage senescence. Here, we investigated the correlation between CCN3 expression and OA degenerative changes, principally in human femoral head cartilage. Human femoral heads obtained from patients who received total hip arthroplasty were categorized into OA and femoral neck fracture (normal) groups without significant age differences. Gene expression analysis of RNA obtained from femoral head cartilage revealed that CCN3 and MMP-13 expression in the non-weight-bearing part was significantly higher in the OA group than in the normal group, whereas the weight-bearing OA parts and normal cartilage showed no significant differences in the expression of these genes. The expression of COL10A1, however, was significantly higher in weight-bearing OA parts compared with normal weight-bearing parts, and was also higher in weight-bearing parts compared with non-weight-bearing parts in the OA group. In contrast, OA primary chondrocytes from weight-bearing parts showed higher expression of CCN3, p16, ADAMTS4, and IL-1β than chondrocytes from the corresponding normal group, and higher ADAMTS4 and IL-1β in the non-weight-bearing part compared with the corresponding normal group. Acan expression was significantly lower in the non-weight-bearing group in OA primary chondrocytes than in the corresponding normal chondrocytes. The expression level of CCN3 did not show significant differences between the weight-bearing part and non-weight-bearing part in both OA and normal primary chondrocytes. Immunohistochemical analysis showed accumulated CCN3 and aggrecan neoepitope staining in both the weight-bearing part and non-weight-bearing part in the OA group compared with the normal group. The CCN3 expression level in cartilage had a positive correlation with the Mankin score. X-ray analysis of cartilage-specific CCN3 overexpression mice (Tg) revealed deformation of the femoral and humeral head in the early stage, and immunohistochemical analysis showed accumulated aggrecan neoepitope staining as well as CCN3 staining and the roughening of the joint surface in Tg femoral and humeral heads. Primary chondrocytes from the Tg femoral head showed enhanced expression of Ccn3, Adamts5, p16, Il-6, and Tnfα, and decreased expression of Col2a1 and -an. These findings indicate a correlation between OA degenerative changes and the expression of CCN3, irrespective of age and mechanical loading. Furthermore, the Mankin score indicates that the expression level of Ccn3 correlates with the progression of OA.