Assessing the potential of renewable energy sources in Turkey

To meet Turkey’s growing energy demand, the installed electric power capacity of 27.8 GW in 2001 has to be doubled by 2010 and increased fourfold by 2020. The difference between Turkey’s total primary energy supply (TPES) of from its own sources and total final consumption (TFC) is projected grow from 1 quad (1.06–2.06) in 1999 to 5.71 quads (2.79–8.5) in 2020 (1 QUAD=293.071 TWh). Turkey’s limited amount of fossil fuels has a present average ratio of proved reserves of 97.38 quads to production rate of 3.2 quads yr⁻¹ of about 30 years. Turkey’s reliance on fossil fuel-based energy systems to meet the growing demand is most likely to exacerbate the issues of energy insecurity, national environmental degradation, and global climate change in increasing proportions. Economically-feasible renewable energy potential in Turkey is estimated at a total of ca. 1.69 quads yr⁻¹ (495.4 TWh yr⁻¹) with the potential for 0.67 quads yr⁻¹ (196.7 TWh yr⁻¹) of biomass energy, 0.42 quads yr⁻¹ (124 TWh yr⁻¹) of hydropower, 0.35 quads yr⁻¹ (102.3 TWh yr⁻¹) of solar energy, 0.17 quads yr⁻¹ (50 TWh yr⁻¹) of wind energy, and 0.08 quads yr⁻¹ (22.4 TWh yr⁻¹) of geothermal energy. Pursuit and implementation of sustainability-based energy policy could provide about 90 and 35% of Turkey’s total energy supply and consumption projected in 2010, respectively. Utilization of renewable energy technologies for electricity generation would necessitate about 23.2 Mha (29.8%) of Turkey’s land resources.     

Entrainment and musicality in the human system interface

What constitutes our human capacity to engage and be in the same frame of mind as another human? How do we come to share a sense of what ‘looks good’ and what ‘makes sense’? How do we handle differences and come to coexist with them? How do we come to feel that we understand what someone else is experiencing? How are we able to walk in silence with someone familiar and be sharing a peaceful space? All of these aspects are part of human ‘interaction’. In designing interactive technologies designers have endeavoured to explicate, analyse and simulate, our capacity for social adaptation. Their motivations are mixed and include the desires to improve efficiency, improve consumption, to connect people, to make it easier for people to work together, to improve education and learning. In these endeavours to explicate, analyse and simulate, there is a fundamental human capacity that is beyond technology and that facilitates these aspects of being, feeling and thinking with others. That capacity, we suggest, is human entrainment. This is our ability to coordinate the timing of our behaviours and rhythmically synchronise our attentional resources. Expressed within the movements of our bodies and voices, it has a quality that is akin to music. In this paper, disparate domains of research such as pragmatics, social psychology, behaviourism, cognitive science, computational linguistics, gesture, are brought together, and considered in light of the developments in interactive technology, in order to shape a conceptual framework for understanding entrainment in everyday human interaction.     

A comparison of algorithms for control constrained optimal control of the Burgers equation

Abstract A comparison of three different but related numerical methods for control constrained optimal control of the Burgers equation is carried out. We develop the principal ideas of the different strategies considered and present detailed numerical examples. Lastly, conclusions about the behavior of the approaches are obtained.     

Cooperative cache-based data access in ad hoc networks

Cooperative caching, in which multiple nodes share and coordinate cached data, is widely used to improve Web performance in wired networks. However, resource constraints and node mobility have limited the application of these techniques in ad hoc networks. We propose caching techniques that use the underlying routing protocols to overcome these constraints and further improve performance.     

A moving horizon approach to Networked Control system design

This paper presents a control system design strategy for multivariable plants where the controller, sensors and actuators are connected via a digital, data-rate limited, communications channel. In order to minimize bandwidth utilization, a communication constraint is imposed which restricts all transmitted data to belong to a finite set and only permits one plant to be addressed at a time. We emphasize implementation issues and employ moving horizon techniques to deal with both control and measurement quantization issues. We illustrate the methodology by simulations and a laboratory-based pilot-scale study.     

Input-output feedback linearization of time-delay systems

In this note, the input-output linearization problem (IOLP) for a class of single-input-single-output nonlinear systems with multiple delays in the input, the output, and the state is studied. The problem is solved by means of various static or dynamic compensators, including state and output feedback. The mathematical setting is based on some noncommutative algebraic tools and the introduction of a nonlinear version of the so-called Roesser models for this class of systems. These are claimed to be the cornerstones for studying nonlinear time-delay systems. Necessary and sufficient conditions are given for the existence of a static or pure shift output feedback which solves the IOLP. Sufficient conditions for the existence of a dynamic state feedback solution are included as well.     

Radiation consequences of seawater contamination during floating storage of reactor-compartment units from salvaged nuclear-powered submarines

The storage time before salvaging of decommissioned nuclear-powered submarines and the floating storage time of reactor units from salvaged submarines can total decades. During this time, radioactive contamination of seawater occurs as a result of the corrosion of the pressure hull in the region of the reactor system and rupturing of the pressure hull - as a result of corrosion of the components of the reactor system. A computational analysis shows that under standard storage conditions the specific activity of water is 10⁵–10⁶ times lower than the intervention level. In the case when the hull and the reactor system are destroyed even with remaining fuel, the specific activity of the sea water near the point of sinking also does not exceed the intervention level because of the slow emission of fission products and transuranium nuclides.Translated from Atomnaya Énergiya, Vol. 97, No. 3, pp. 210–218, September, 2004.     

Mg AZ80/SiC composite bars fabricated by infiltration of porous ceramic preforms

Semi-industrial samples of Mg AZ80/SiC/50p composites (machined bars with o.d.=80 mm and length=150 mm, having a maximum 2 vol pct of retained porosity) were successfully fabricated by pressureless, low-pressure (under overpressure of about 0.3 MPa) and moderate-pressure (under overpressure of about 0.8 MPa) infiltration. Pressureless infiltration was completed in 24 hours under the flowing atmosphere of nitrogen, whereas the moderate and low-pressure infiltrations were performed under a static atmosphere of pressurized nitrogen for 7 and 0.5 hours, respectively. The composite samples obtained by all applied infiltration paths posessed a homogeneous microstructure and superior mechanical properties as compared to the nonreinforced matrix. Due to the improved productivity of composite fabrication in comparison with the other two infiltration paths investigated in this work, the moderate-pressure infiltration process was recognized as the most competitive.     

Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys

We have evaluated controlled decarburization as a method for probing the effect of alloying elements on ferrite growth from austenite. The technique permits the exploration of longer-time ferrite layer growth; it minimizes the effects of interface structure on ferrite growth; and it permits the isolation of the effects of temperature and alloying element concentration on ferrite/austenite interface motion. The study of the decarburization of initially homogeneous Fe-C-Ni alloys was complemented by experiments using specimens with a controlled nickel concentration gradient. Although the decarburization method yields consistent results at longer times, it is found to be less appropriate for the study of initial ferrite growth. Nucleation in the gas/solid interface region, coupled with uncertainties about the precise time of decarburization, leads to large relative errors at the earliest times. For these reasons, the method is considered a valuable complement to studies based on precipitation boundary conditions. This article is based on a presentation given in the symposium “The Effects of Alloying Elements on the Gamma to Alpha Transformation in Steels,” October 6, 2002, at the TMS Fall Meeting in Columbus, Ohio, under the auspices of the McMaster Centre for Steel Research and the TMS-ASM Phase Transformations Committee.     

The effect of CaF<Subscript>2</Subscript> on thermodynamics of CaO-CaF<Subscript>2</Subscript>-SiO<Subscript>2</Subscript>(-MgO) slags

To address the role of CaF₂ in the CaO-CaF₂-SiO₂(-MgO) slag system employed for the production of low-pressure rotor steels, the thermodynamic aspects of the slag were investigated by equilibrating it with liquid iron at 1873 K in CaO or MgO crucibles. Presaturation of slag with an oxide block piece of CaO or MgO in a Pt crucible and application of a carbon paste to the outside of an oxide crucible were designed to prevent crucible failure during the slag-metal experiments. The liquidus isotherm and phase boundary of the preceding slag system were investigated using the slag-metal equilibria. Also, the effect of CaF₂ on the sulfide capacity and the activity coefficient of Fe _t O were of particular interest in controlling the sulfur level and cleanliness of low-pressure rotor steels.