Development of a low-energy high resolution X-ray camera for high-energy gamma photon background environments

Although a high-energy gamma camera can obtain images of ¹³⁷Cs distribution by detecting the 662-keV gamma photons, its spatial resolution is reduced because high-energy gamma photons penetrate the edge of the pinhole collimator. To solve this problem, we developed a low-energy X-ray camera that detects the characteristic X-ray photons (32–37 keV) that are emitted from ¹³⁷Cs to obtain high resolution images. We used a 45 × 45 × 1-mm-thick NaI(Tl) scintillator that was encapsulated in 0.1-mm-thick aluminum and optically coupled to a 2-inch square, position sensitive photomultiplier tube (Hamamatsu Photonics, PSPMT:H12700 MOD) as an imaging detector. The imaging detector was encased in a 2-cm-thick tungsten alloy container and a pinhole collimator was attached to its camera head. The spatial resolution and sensitivity were ～5 mm full-width at half-maximum and ～0.6 cps/MBq for the 1.5-mm pinhole collimator 10 cm from the collimator surface, respectively. We administered 5 MBq of ¹³⁷Cs to a soybean seedling, imaged the distribution of radionuclides for six hours, and successfully obtained a high resolution image of it with our developed X-ray camera. We believe our camera will be a powerful tool for such ¹³⁷Cs imaging in plants.     

Crystallization process and some properties of novel transparent machinable calcium-mica glass-ceramics

Bulk glass having a calcium-mica composition (Ca_0.5Mg₃AlSi₃O₁₀F₂) is homogeneous glass. The crystallization mechanism of the mica is surface crystallization and transparency is lost completely when crystallization occurs on the surface. In this study, by decreasing SiO₂ and increasing CaO and Al₂O₃ from the chemical composition of Ca_0.5Mg₃AlSi₃O₁₀F₂, and moreover by replacing a small amount of K₂O instead of CaO, the phase separation appears in the glasses. Because of this phase separation, the mica begins to be crystallized not only on the surface but also in the bulk at lower temperatures. Consequently, the novel transparent machinable mica glass-ceramic can be obtained by heating the glasses having the chemical composition of Ca_0.6Mg₃Al_1.2Si_2.8O₁₀F₂ and K_0.01Ca_0.595Mg₃Al_1.2Si_2.8O₁₀F₂. As a larger amount of calcium-mica is separated, the bending strength decreases and the fracture toughness increases. Furthermore, by replacing K⁺ ion instead of Ca²⁺ ion in the interlayer of calcium-mica, the interlayer bonding strength becomes high, resulting in the increase of the bending strength.     

Removal of proteins from natural rubber with urea and its application to continuous processes

The removal of proteins from natural rubber through a batch process was studied by the incubation of the rubber latex with urea in the presence of sodium dodecyl sulfate. Under suitable conditions, the total nitrogen content of deproteinized natural rubber (DPNR) decreased from 0.38 to 0.02 wt % after incubation for 10 min; this was similar to that of the rubber deproteinized with a proteolytic enzyme for 12 h. For applications, continuous incubation and centrifugation were individually investigated by the use of a semicircular channel and a continuous centrifuge, respectively, to scale up DPNR preparation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The effect of osmotic dehydrofreezing on the role of the cell membrane in carrot texture softening after freeze-thawing

To understand the protective mechanism of the osmotic dehydrofreezing technique on carrot texture after freeze-thawing, two mechanical texture parameters, fracture stress related to the cell wall and initial modulus related to the cell membrane, as well as cell membrane water permeability using PFG-NMR were evaluated. In particular, to understand the role of the cell membrane in texture alteration, tissue in which the cell membrane was exposed to chloroform vapor was used. Although dehydrofreezing protected texture from freezing damage, the effect was only observed with respect to fracture stress, with exhibited values close to those for raw tissue. However, there was no protective effect on initial modulus and water permeability, in which values did not differ from those of cell membrane-free tissue. More specifically, osmotic dehydrofreezing had no effect on the cell membrane induced by freeze-thawing.     

Development and validation of an HPLC-based screening method to acquire polyhydroxyalkanoate synthase mutants with altered substrate specificity

A rapid and convenient method for the compositional analysis of polyhydroxyalkanoate (PHA) was developed using high-performance liquid chromatography (HPLC) and alkaline sample pretreatment in a 96-well plate format. The reliability of this system was confirmed by the fact that a mutant with a D171G mutation of Aeromonas caviae PHA synthase (PhaC(Ac)), which gained higher reactivity toward 3-hydroxyhexanoate (3HHx), was selected from the D171X mutant library. Together with D171G mutant, several single mutants showing high reactivity toward 3HHx were isolated by the HPLC assay. These new mutants and double mutants combined with an N149S mutation were used to synthesize P(3-hydroxybutyrate-co-3HHx) in Ralstonia eutropha PHB(-)4 from soybean oil as carbon source, achieving higher levels of 3HHx fraction than the wild-type enzyme. Based on these results, the high-throughput screening system will serve as a powerful tool for exploring new and beneficial mutations responsible for regulating copolymer composition of PHA.     

Trypsins from the pyloric ceca of jacopever (Sebastes schlegelii) and elkhorn sculpin (Alcichthys alcicornis): Isolation and characterization

Trypsins from the pyloric ceca of jacopever (Sebastes schlegelii), TR-J, and elkhorn sculpin (Alcichthys alcicornis), TR-E, were purified by gel filtration on Sephacryl S-200 and Sephadex G-50. The molecular weights of TR-J and TR-E were estimated to be 24,000 Da by sodium dodecyl sulfate–polyacrylamide gel electrophoresis. TR-J and TR-E revealed optimum temperatures of 60 and 50 °C, respectively, and showed the same optimum pH (pH 8.0) for hydrolysis of N-p-tosyl-l-arginine methyl ester. TR-J and TR-E were unstable at above 50 and 40 °C, respectively, and were more stable at alkaline pH than at acidic pH. Thermal stabilities of TR-J and TR-E were highly calcium dependent. These purified trypsin enzymes were inhibited by serine protease inhibitors, such as TLCK and soybean trypsin inhibitor. The N-terminal amino acid sequences of TR-J and TR-E were also investigated. The N-terminal amino acid sequences of TR-J, IVGGYECKPYSQPHQVSLNS, and TR-E, IVGGYECTPHSQAHQVSLNS, were found, and these sequences showed highly homology to other fish trypsins.     

Material-binding peptide application--ZnO crystal structure control by means of a ZnO-binding peptide

Recently, a zinc oxide (ZnO)-binding peptide (ZnOBP) has been identified and has been used to assist the synthesis of unique crystalline ZnO particles. We analyzed the influence of ZnOBP on the crystal growth of ZnO structures formed from zinc hydroxide. The addition of ZnOBP in the hydrothermal synthesis of ZnO suppressed [0001] crystal growth in the ZnO particles, indicating that the specificity of the material-binding peptide for specific inorganic crystal faces controlled the crystal growth. Furthermore, the dipeptides with a partial sequence of ZnO-binding "hot spot" in ZnOBP were used to synthesize ZnO particles, and we found that the presence of these dipeptides more strictly suppressed (0001) growth in ZnO crystals than did the complete ZnOBP sequence. These results demonstrate the applicability of dipeptides selected from material-binding peptides to control inorganic crystal growth.     

Photocatalytic hydrogen production from water with nonfood hydrocarbons as oxidizing sacrifice agents

To enhance photocatalytic water splitting, various oxidizing sacrifice agents (OSA) have been added to the system in order to scavenge the coproduced O₂, and, thus, to hinder the reverse reactions. In the aim of achieving carbon‐neutral photocatalytic water splitting, nonfood hydrocarbons of castor‐ and jojoba‐oils were evaluated as OSA. Moreover, various surfactants were tested as emulsifiers for W/O binary solution for promoting photocatalytic water splitting rate. Among the OSA used, the castor‐oil was found to be more suitable candidate compared to jojoba‐oil, which was attributed to its smaller carbon chain numbers of mainly 18. Without surfactants, around 20 vol %‐castor‐oil aqueous binary solution with TiO₂/Pt(0.10 wt %) provided the highest water splitting rate of about 30 mL‐H₂/(m²·h). Among tested surfactants, liquid‐detergent was the best due to its optical transparency. 40 vol %‐ or 60 vol %‐castor‐oil emulsion with a drop of liquid‐detergent resulted in a water splitting rate of 125 mL‐H₂/(m²·h), which was four times greater that the aforementioned highest value. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Polymer electrolyte membrane with nanomatrix channel prepared by sulfonation of natural rubber grafted with polystyrene

High‐proton‐conductive polymer electrolyte with a nanomatrix channel was prepared by graft copolymerization of styrene onto deproteinized natural rubber followed by sulfonation with chlorosulfonic acid. First, natural rubber latex was purified with urea in the presence of surfactant to remove almost all proteins present in the rubber. Second, graft copolymerization of styrene onto deproteinized natural rubber was carried out with tert‐butyl hydroperoxide/tetraethylenepentamine as an initiator at 30°C in latex stage. The graft‐copolymerized natural rubber (DPNR‐graft‐PS) was sulfonated with chlorosulfonic acid in chloroform solution at an ambient temperature. The resulting sulfonated DPNR‐graft‐PS was characterized by FTIR spectroscopy, solid state ¹³C CP/MAS NMR spectroscopy, elemental analysis, and transmission electron microscopy. High proton conductivity of about 0.1 S/cm, less water uptake of 24 wt % and comparatively good stress at break of 9 MPa were accomplished at suitable contents of styrene units and sulfur, i.e., 32 wt % and 75 mol %, respectively. The high proton conductivity, excellent stability, and good mechanical properties were associated with not only the formation of the nanomatrix channel but also a specific concentration of sulfuric acid group. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Transmission electron microscopic observations of nanobubbles and their capture of impurities in wastewater

Unique properties of micro- and nanobubbles (MNBs), such as a high adsorption of impurities on their surface, are difficult to verify because MNBs are too small to observe directly. We thus used a transmission electron microscope (TEM) with the freeze-fractured replica method to observe oxygen (O₂) MNBs in solutions. MNBs in pure water and in 1% NaCl solutions were spherical or oval. Their size distribution estimated from TEM images close to that of the original solution is measured by light-scattered methods. When we applied this technique to the observation of O₂ MNBs formed in the wastewater of a sewage plant, we found the characteristic features of spherical MNBs that adsorbed surrounding impurity particles on their surface.