Wireless Energy Transfer System with Multiple Coils via Coupled Magnetic Resonances

A general equivalent circuit model is developed for a wireless energy transfer system composed of multiple coils via coupled magnetic resonances. To verify the developed model, four types of wireless energy transfer systems are fabricated, measured, and compared with simulation results. To model a system composed of n‐coils, node equations are built in the form of an n‐by‐n matrix, and the equivalent circuit model is established using an electric design automation tool. Using the model, we can simulate systems with multiple coils, power sources, and loads. Moreover, coupling constants are extracted as a function of the distance between two coils, and we can predict the characteristics of a system having coils at an arbitrary location. We fabricate four types of systems with relay coils, two operating frequencies, two power sources, and the function of characteristic impedance conversion. We measure the characteristics of all systems and compare them with the simulation results. The flexibility of the developed model enables us to design and optimize a complicated system consisting of many coils.     

Outstanding Low-Temperature Performance of Structure-Controlled Graphene Anode Based on Surface-Controlled Charge Storage Mechanism

The energy and power performance of lithium (Li)-ion batteries is significantly reduced at low-temperature conditions, which is mainly due to the slow diffusion of Li-ions in graphite anode. Here, it is demonstrated that the effective utilization of the surface-controlled charge storage mechanism through the transition from layered graphite to 3D crumpled graphene (CG) dramatically improves the Li-ion charge storage kinetics and structural stability at low-temperature conditions. The structure-controlled CG anode prepared via a one-step aerosol drying process shows a remarkable rate-capability by delivering ≈206 mAh g^–1 at a high current density of 10 A g^–1 at room temperature. At an extremely low temperature of −40 °C, CG anode still exhibits a high capacity of ≈154 mAh g^–1 at 0.01 A g^–1 with excellent rate-capability and cycling stability. A combination of electrochemical studies and density functional theory (DFT) reveals that the superior performance of CG anode stems from the dominant surface-controlled charge storage mechanism at various defect sites. This study establishes the effective utilization of the surface-controlled charge storage mechanism through structure-controlled graphene as a promising strategy to improve the charge storage kinetics and stability under low-temperature conditions.     

Nonfullerene Electron Transporting Material Based on Naphthalene Diimide Small Molecule for Highly Stable Perovskite Solar Cells with Efficiency Exceeding 20%

This study reports a new nonfullerene electron transporting material (ETM) based on naphthalene diimide (NDI) small molecules for use in high‐performance perovskite solar cells (PSCs). These solar cells simultaneously achieve high power conversion efficiency (PCE) of over 20% and long‐term stability. New NDI‐ID (N,N′‐Bis(1‐indanyl)naphthalene‐1,4,5,8‐tetracarboxylic diimide) consisting of an N‐substituted indane group having simultaneous alicyclic and aromatic characteristics is synthesized by a low‐cost, one‐step reaction, and facile purification method. The partially flexible characteristics of an alicyclic cyclopentene group on indane groups open the possibility of low‐temperature solution processing. The conformational rigidity and aromaticity of phenyl and alicyclic groups contribute to high temporal stability by strong secondary bonds. NDI‐ID has herringbone packed semiconducting NDI cores that exhibit up to 0.2 cm² V^?1 s^?1 electron mobility in field effect transistors. The inverted PSCs based on CH(NH₂)₂PbI_3–xBr_x with NDI‐ID ETM exhibit very high PCEs of up to 20.2%, which is better than that of widely used PCBM (phenyl‐C61‐butyric acid methyl ester) ETM‐based PSCs. Moreover, NDI‐ID‐based PSCs exhibit very high long‐term temporal stability, retaining 90% of the initial PCE after 500 h at 100 °C with 1 sun illumination without encapsulation. Therefore, NDI‐ID is a promising ETM for highly efficient, stable PSCs.     

New Syndrome Check Error Estimation and Its Concatenated Coding

A low-complexity and high performance SCEE (Syndrome Check Error Estimation) decoding method for convolutional codes and its concatenated SCEE/RS (Reed–Solomon) coding scheme are proposed. First, we describe the operation of the decoding steps in the proposed algorithm. Then deterministic values on the decoding operation are derived when some combination of predecoder-reencoder is used. Computer simulation results show that the computational complexity of the proposed SCEE decoder is significantly reduced compared to that of conventional Viterbi decoder without degradation of the P_e performance. Also, simulation results of BER performance of the concatenated SCEE/Hard Decision Viterbi (HD-Viterbi) and SCEE/RS (Reed–Solomon) codes are presented.     

Low-Loss Polymer-Based Long-Range Surface Plasmon-Polariton Waveguide

To improve the propagation loss of polymer-based long-range surface-plasmon-polariton (LR-SPP) waveguide devices at the telecom wavelength range, low-loss LR-SPP waveguides were fabricated in an ultraviolet-curable acrylate polymer with a low refractive index and absorption loss. A propagation loss of 1.72 dB/cm at a wavelength of 1.55 mum was achieved with a 14-nm-thick and 3-mum-wide metal stripe.     

A 60 GHz Medium Power Amplifier for Radio‐over‐Fiber System

We present the design and fabrication of a 60 GHz medium power amplifier monolithic microwave integrated circuit with excellent gain‐flatness for a 60 GHz radio‐over‐fiber system. The circuit has a 4‐stage structure using microstrip coupled lines instead of metal‐insulator‐metal capacitors for unconditional stability of the amplifier and yield enhancement. The gains of each stage of the amplifier are modified to provide broadband characteristics of input/output matching for the first and fourth stages and to achieve higher gains for the second and third stages to improve the gain‐flatness of the amplifier for wideband.