The Pathogenesis of Cardiac Fibrosis: A Review of Recent Progress

Fibrosis is defined as the excessive deposition of extracellular matrix (ECM) proteins in the interstitium. It is an essential pathological response to chronic inflammation. ECM protein deposition is initially protective and is critical for wound healing and tissue regeneration. However, pathological cardiac remodeling in excessive and continuous tissue damage with subsequent ECM deposition results in a distorted organ architecture and significantly impacts cardiac function. In this review, we summarized and discussed the histologic features of cardiac fibrosis with the signaling factors that control it. We evaluated the origin and characteristic markers of cardiac fibroblasts. We also discussed lymphatic vessels, which have become more important in recent years to improve cardiac fibrosis.     

Elongation and Contraction of Scallop Sarcoplasmic Reticulum (SR): ATP Stabilizes Ca2+-ATPase Crystalline Array Elongation of SR Vesicles

The Ca²⁺-ATPase is an integral transmembrane Ca²⁺ pump of the sarcoplasmic reticulum (SR). Crystallization of the cytoplasmic surface ATPase molecules of isolated scallop SR vesicles was studied at various calcium concentrations by negative stain electron microscopy. In the absence of ATP, round SR vesicles displaying an assembly of small crystalline patches of ATPase molecules were observed at 18 µM [Ca²⁺]. These partly transformed into tightly elongated vesicles containing ATPase crystalline arrays at low [Ca²⁺] (≤1.3 µM). The arrays were classified as ‘’tetramer’’, “two-rail” (like a railroad) and ‘’monomer’’. Their crystallinity was low, and they were unstable. In the presence of ATP (5 mM) at a low [Ca²⁺] of ~0.002 µM, “two-rail” arrays of high crystallinity appeared more frequently in the tightly elongated vesicles and the distinct tetramer arrays disappeared. During prolonged (~2.5 h) incubation, ATP was consumed and tetramer arrays reappeared. A specific ATPase inhibitor, thapsigargin, prevented both crystal formation and vesicle elongation in the presence of ATP. Together with the second part of this study, these data suggest that the ATPase forms tetramer units and longer tetramer crystalline arrays to elongate SR vesicles, and that the arrays transform into more stable “two-rail” forms in the presence of ATP at low [Ca²⁺].     

Effects of V content on hydrogen storage properties of V–Ti–Cr alloys with high desorption pressure

Hydrogen storage is one of the most important issues to realize hydrogen society especially for on-board usage. Recently, high-pressure metal hydride (MH) tank attracts many attentions due to its high volumetric hydrogen storage density and relatively easy heat management. To emphasize its merits, further improvements of properties of MH, such as capacity, hydrogen desorption capability at low temperature and durability, are required. In this paper, V–Ti–Cr alloys of V-rich compositions were investigated with perspective of increasing of hydrogen desorption pressure and durability. In both of 60at%V–Ti–Cr and 80at%V–Ti–Cr alloys, good relationship between hydrogen desorption pressure and Ti content was observed. In comparing with 60at%V–Ti–Cr alloys, 80at%V–Ti–Cr alloys showed good durability. It is quite notable that relationship between limitation line (upper substitution limit of Ti by Cr without degradation of hydrogen capacity) and desorption pressure for V–Ti–Cr ternary system with V-rich composition is clarified. And also, it is revealed that in the case of V–Ti–Cr ternary system, not only Ti/Cr ratio but also V content is important factor to obtain alloys with high hydrogen desorption pressure. 75at%V–5at%Ti–Cr as-cast sample showed good durability, hydrogen desorption capability at low temperature and relatively high effective hydrogen capacity simultaneously.     

Efficient electron transport in 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl and the applications in white organic light emitting devices

The electron transport capability of 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl (α-NPD) was investigated by fundamental physical measurements named as current–voltage (I–V) electrical property evaluation and displacement current measurement (DCM). In electron-dominated devices, the I–V characteristics of α-NPD were similar as that of (8-hydroxyquinolino) aluminum (Alq₃) owing to their same order of electron mobilities. The interface of Al/LiF and α-NPD was proven to be an Ohmic contact through the evaluation of I–V characteristics at low bias regime (<3 V). And an electron injection barrier, 0.21 eV, at Al/LiF/α-NPD was obtained by extrapolating the temperature dependent I–V curves. The electron transport behavior in α-NPD film was further confirmed by DCM evaluations. Furthermore, an efficient white organic light emission device was successfully fabricated by using α-NPD as hole transport layer and electron transport layer, respectively.     

Fretting fatigue behaviour of Ni-free high-nitrogen stainless steel in a simulated body fluid

Abstract

Fretting fatigue behaviour of Ni-free high-nitrogen steel (HNS) with a yield strength of about 800 MPa, which was prepared by nitrogen gas pressurized electroslag remelting, was studied in air and in phosphate-buffered saline (PBS(-)). For comparison, fretting fatigue behaviour of cold-rolled SUS316L steel (SUS316L(CR)) with similar yield strength was examined. The plain fatigue limit of HNS was slightly lower than that of SUS316L(CR) although the former had a higher tensile strength than the latter. The fretting fatigue limit of HNS was higher than that of SUS316L(CR) both in air and in PBS(-). A decrease in fatigue limit of HNS by fretting was significantly smaller than that of SUS316L(CR) in both environments, indicating that HNS has better fretting fatigue resistance than SUS316L(CR). The decrease in fatigue limit by fretting is discussed taking into account the effect of friction stress due to fretting and the additional influences of wear, tribocorrosion and plastic deformation in the fretted area.     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

Long-term trends of electric efficiencies in electricity generation in developing countries

This analysis provides time-series data on electric efficiencies for 138 countries and regions, covering all fossil fuels for the period 1971–2005, with an emphasis on non-Organization for Economic Cooperation and Development (OECD) countries. Fossil fuel consumption for electricity generation in non-OECD countries now exceeds that in the OECD. The historical performance of the top five non-OECD consumers of each fossil fuel for which reliable data are available is presented and discussed. For each fuel, the countries that lead the world in efficiency are used for benchmarks; bringing the rest of the world up to these standards would result in energy savings of 26 EJ (equivalent to 5% of global energy consumption) and CO₂ emissions reduction of 2.1 Pg (equivalent to 8% of global CO₂ emissions). Coal showed the largest potential margin of improvement for both energy and CO₂, with possible savings equivalent to 3% of current global energy consumption and 5% of global CO₂ emissions. The gap in electric efficiency between OECD and non-OECD countries over the past 35 years has widened for coal-fired generation, stayed relatively constant for natural gas, but has shrunk for petroleum. The results show the very gradual nature of overall efficiency improvements and the significant differences among regions and countries.     

Evaluation of selective plating media for the detection of heat- or freeze-injured Staphylococcus aureus

The efficacy of Baird-Parker (BP) agar, mannitol-salt-egg yolk (MSEY) agar and mannitol salt (MS) agar in detecting Staphylococcus aureus FRI-100 heated at 52 degrees C for 20 min in 100 mmol/L potassium phosphate buffer was determined. Brain heart infusion agar with 1% pyruvate (BHIP agar) supported the highest recovery of injured cells and was used as the control medium. Of the three selective media, significantly higher recovery of heat-injured cells was observed on BP agar than MSEY agar, and the poorest recovery was observed on MS agar (p < 0.05). Low recovery of unheated cells was obtained for MS compared with other media (p < 0.05). A reduction in populations occurred gradually in reagent-grade water stored for 14 days at -20 degrees C. There was no significant difference between BHIP agar and MS agar in the number of freeze-injured cells recovered from 1 to 14 days.     

Analytical tool development for coarse break-up of a molten jet in a deep water pool

A computer code JASMINE-pre was developed for the prediction of premixing conditions of fuel–coolant interactions and debris bed formation behavior relevant to severe accidents of light water reactors. In JASMINE-pre code, a melt model which consists of three components of sub-models for melt jet, melt particles and melt pool, is coupled with a two-phase flow model derived from ACE-3D code developed at JAERI. The melt jet and melt pool models are one-dimensional representations of a molten core stream falling into a water pool and a continuous melt body agglomerated on the bottom, respectively. The melt particles generated by the melt jet break-up are modeled based on a Lagrangian grouped particle concept. Additionally, a simplified model pmjet was developed which considers only steady state break-up of the melt jet, cooling and settlement of particles in a stationary water pool. The FARO corium quenching experiments with a saturation temperature water pool and a subcooled water pool were simulated with JASMINE-pre and pmjet. JASMINE-pre reproduced the pressurization and fragmentation behavior observed in the experiments with a reasonable accuracy. Also, the influences of model parameters on the pressurization and fragmentation were examined. The calculation results showed a quasi-steady state phase of melt jet break-up during which the amount of molten mass contained in the premixture was kept almost constant, and the steady state molten premixed masses evaluated by JASMINE-pre and pmjet agreed well.     

Surface‐discharge electrode design methods for ACPDPs

Abstract— In order to lower development costs and to shorten development time, small panels, under 10‐in on the diagonal, are used for the experiments to improve the luminous efficiency of plasma‐display panels. However, it is difficult to show the same results as those of large panels, over 40 in. on the diagonal. In this paper, first, we show that the luminous efficiency and the voltage margin of mini‐panels are not obtained with large panels by using an actual 46‐in. PDP. The reason is that the resistance in the large panels is larger than that in the mini panels and the voltage drop in the large panels are larger than in mini‐panels. Therefore, we conclude that the bus electrode width and the transparent electrode width are important factors in the design of large PDPs. Next, we show the technique of designing large panels by using a database obtained from mini‐panels. The estimated cell‐design results show good agreement with an actual 46‐in. PDP in luminous efficiency and minimum sustain voltage. We show that a desired large PDP can be obtained by using the cell design proposed in the present paper.