A 0.18-μm 256-Mb DDR-SDRAM with low-cost post-mold tuning methodfor DLL replica

A 200-MHz double-data-rate synchronous-DRAM (DDR-SDRAM) was developed. The chip contains a delay-locked loop (DLL) which performs over a wide range of operating conditions. Post-mold-tuning allows precise replica programming. A 200-MHz intra-chip data bus is suitable for DDR operation     

Orbit systematics in anisotropic Kepler problem

We revisit the Anisotropic Kepler Problem (AKP), which concerns with trajectories of an electron with anisotropic mass term in a Coulomb field. This is one of the most fundamental fields in Quantum Chaos. Nowadays various quantum systems are challenging us. Classical theories of these may have chaos. Quantum mechanics have developed from integrable cases and may have to be reformulated for such cases. AKP then serves as a suitable testing ground for quantum chaos. We first review a pioneering work by Martin Gutzwiller (J Math Phys (1977) 18:106). We shall show the systematics of the trajectories using ample figures from an extensive numerical analysis. Then we focus on the rolê of hyperbolic singularities and we comment on the approximations in an analytic formulation. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Possibilities of the Formation of Enol-Ethers in Lignin by Soda Pulping

In the alkaline decomposition of a β-O-4 type lignin model compound (erythro-guaiacylglycerol-β-guaiacyl ether, compound 1), an isomeric pair of C₆C₂ enol-ether (2-methoxy-4-[2-(2-methoxyphenoxy)-vinyl]-phenol, compound 2) was detected as the main decomposition product with no trace of C₆C₃ enol-ether (4-[3-hydroxy-1-(2-methoxyphenoxy)-propenyl]-2-methoxy-phenol, compound 3) or other dimers. In contrast, compound 2 was not detected in the alkaline decomposition products of compound 3. Under alkaline conditions, the γ-hydroxymethyl group of compound 3 was reduced to form 2-methoxy-4-[1-(2-methoxyphenoxy)-propenyl]-phenol (compound 4). In the HSQC analysis of soda lignin, the formation of substructures of C₆C₂ type enol-ether (related to compound 2) was confirmed. However, no substructures related to compound 4, which could be formed if a substructure of C₆C₃ type enol-ether was formed under alkaline conditions, were detected. Therefore, it could be concluded that C₆C₃ type enol-ethers could not be intermediates of alkaline decomposition products of lignin.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

Proton-conducting electrolyte membranes based on hyperbranched polymer with a sulfonic acid group for high-temperature fuel cells

The hyperbranched polymers (HBP-SA-Acs) with both a sulfonic acid group as a functional group and an acryloyl group as a cross-linker at terminals in different ratios of sulfonic acid group/acryloyl group (SO₃H/Ac) were successfully synthesized as a new thermally stable proton-conducting electrolyte. The cross-linked hyperbranched polymer electrolyte membranes (CL-HBP-SAs) were prepared by thermal polymerizations of the HBP-SA-Acs using benzoyl peroxide, and their ionic conductivities under dry condition and thermal properties were investigated. The ionic conductivities of the CL-HBP-SAs were found to be in the range of 2.2 × 10⁻⁴ to 3.3 × 10⁻⁶ S/cm, depending upon the SO₃H unit contents, at 150 °C under dry condition, and showed the Vogel-Tamman-Fulcher (VTF) type temperature dependence, indicating that proton transfer is cooperated by local polymer chain motion. All CL-HBP-SAs were thermally stable up to 260 °C, and they had suitable thermal stability as electrolyte membranes for the high-temperature fuel cells under dry condition. Fuel cell measurement using a single membrane electrode assembly cell with a cross-linked electrolyte membrane was successfully performed under non-humidified condition. It was demonstrated that applying the concept of dry polymer system to proton conduction is one possible approach toward high-temperature fuel cells.     

Growth Inhibition of Bacteria by Salsa Mexicana

ABSTRACT: Antimicrobial activity of salsa mexicana against Escherichia coli, Klebsiella pneumoniae, Bacillus subtilis, Bacillus cereus, Staphylococcus aureus , and Saccharomyces cerevisiae was studied. The pressed salsa juice suppressed completely the growth of E. coli, B. subtilis , and S. aureus. K. pneumoniae and B. cereus were suppressed partly but Saccharomyces cerevisiae was not suppressed at all by the juice. Three types of microbicidal or microbiostatic components have been found: (1) H⁺, (2) volatile compounds, and (3) non-ionized carboxylic acids or analogous compounds. It is proposed that the supplementation of stink bugs in the salsa seen widely in the south of Mexico is used to intensify the herbal odor of the salsa.     

Effect of gene disruption of succinate dehydrogenase on succinate production in a sake yeast strain

Succinate dehydrogenase (SDH) of Saccharomyces cerevisiae consists of four subunits encoded by the SDH1, SDH2, SDH3, and SDH4 genes. We determined the effect of SDH deficiency on the productivity of organic acids in a sake yeast strain Kyokai no. 9. The SDH activity of single disruptants was retained at 30-90% of that of the wild-type strain, but the activity disappeared in double disruptants of the SDH1 and SDH2 or SDH1b (the SDH1 homologue) genes. Two double disruptants showed no growth on a medium containing glycerol as the sole carbon source, while the single disruptants could utilize glycerol. These results indicate that double disruption of the SDH1 and SDH2 or SDH1b genes is required for complete loss of SDH activity and that the SDH1b gene compensates for the function of the SDH1 gene. The sdh1 sdh1b disruptant showed a marked increase in succinate productivity of up to 1.9-fold along with a decrease in malate productivity relative to the wild-type strains under shaking conditions. Under both static and sake brewing conditions, the productivity of these organic acids in the disruptants was virtually unchanged from that in the wild-type strain. Furthermore, SDH activity was undetectable in the wild-type and the disrupted strains under static conditions. These results suggest that SDH activity contributes to succinate production under shaking conditions, but not under static and sake brewing conditions.     

Corrosion resistance of structural materials in high-temperature aqueous sulfuric acids in thermochemical water-splitting iodine–sulfur process

Very harsh environments exist in the iodine–sulfur process for hydrogen production. Structural materials for sulfuric acid vaporizers and concentrators are exposed to high-temperature corrosive environments. Immersion tests were carried out to evaluate the corrosion resistance of ceramics and to evaluate corrosion-resistant metals exposed to environments of aqueous sulfuric acids at temperatures of 320, 380, and 460 °C, and pressure of 2 MPa. The aqueous sulfuric acid concentrations for the temperatures were 75, 85, and 95 wt%, respectively. Ceramic specimens of silicon carbides (SiC), silicon-impregnated silicon carbides (Si–SiC), and silicon nitrides (Si₃N₄) showed excellent corrosion resistance from weight loss measurements after exposure to 75, 85, and 95 wt% sulfuric acid. High-silicon irons with silicon content of 20 wt% showed a fair measure of corrosion resistance. However, evidence of crack formation was detected via microscopy. Silicon enriched steels severely suffered from uniform corrosion with a corrosion rate in 95 wt% sulfuric acid of approximately 1 g m⁻² h⁻¹. Among the tested materials, the ceramics SiC, Si–SiC, and Si₃N₄ were found to be suitable candidates for structural materials in direct contact with the considered environments.     

Cooperative localization by using knowledge of self-organized regularity

In this article, a new localization approach for a team of robots that use the emergent properties of their formation is proposed. Synchronized behavior sometimes generates spin-off effects that include geometric patterns. The question then arises as to whether it is possible to use these patterns for something important for robots. In this article, Takayama’s control strategy, which is a target enclosure formation, is discussed. A simple and useful expansion of Monte Carlo localization by the emergent pattern is proposed. The proposed algorithms are confirmed through a series of computer simulations.