Crystal growth of MgAlB14-type compounds using metal salts and some properties

LEAlB₁₄ (orthorhombic, Imam) (LE = Li, Mg) crystals were grown using metal salts (Li₂CO₃, LiF, LiI, MgO, MgF₂, MgI₂) and crystalline boron from a high-temperature aluminium metal flux. The growth conditions for growing LEAlB₁₄ were established using the starting mixtures of B/LE = 2.0, and Al metal was added to each mixture at a mass ratio of 1:15–20. LEAlB₁₄ crystals from the Al-self flux using metal salts could be obtained from all the different salts. The maximum dimensions of LiAlB₁₄ and MgAlB₁₄ crystals were approximately 18 and 12 mm for the crystals obtained from LiF and MgF₂. The unit-cell parameters of as-grown LEAlB₁₄ are as follows: for LiAlB₁₄, obtained from LiF, a = 0.5846 (2) nm, b = 0.8144 (2) nm, c = 1.0355 (3) nm, V = 0.4930 (2) nm³: for MgAlB₁₄, obtained from MgF₂, a = 0.5845 (2) nm, b = 0.8114 (2) nm, c = 1.0330 (3) nm, V = 0.4899 (3) nm³. Microhardness, oxidation resistance and magnetic susceptibility of these materials are described in detail.     

Development of a new sensorless vector‐controlled and transmissionless electric vehicle using a permanent‐magnet synchronous motor

One of the most important technologies for electric vehicles (EVs) will be drive control technology for the main motor. It is desired that the drive control technology have the following characteristics. (1) It does not require a position/speed sensor for controlling motor drive, which has been mounted on the rotor shaft. (2) It has vector controls that can produce torque quickly, efficiently, and/or precisely. (3) It has wide driving‐range and allows developing EVs with no variable transmission. This paper proposes new drive control technologies for such EVs using a permanent‐magnet synchronous motor as a main motor, and verifies its usefulness through development of an actual EV that can drive on public roads. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 83–94, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20459     

A genetic algorithm with local search using activity list characteristics for solving resource‐constrained project scheduling problem with multiple modes

In this paper, we aim to solve the problem of resource‐constrained project scheduling with multiple modes (rc‐PSP/mM), in which multiple execution modes are available for each of the project's activity and with minimization of makespan as objective. We present a new genetic algorithm approach in order to solve this problem. In this procedure, we propose a new mutation operator that exploits a critical path and two new local search procedures, i.e. critical path improvement local search (cpiLS) and iterative forward/backward local search (ifbLS), using activity list characteristics. The cpiLS reduces the critical path and the ifbLS improves resource allocation of the schedule of rc‐PSP/mM. Also, to evaluate the proposed approach, we compare the results of the computational experiment on certain standard project instances with the several competing heuristic procedures presented in the literature, and it has been revealed that our procedure is one of the most competitive among the algorithms. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Adsorption of trypsin onto poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres and its enzymatic activity

Poly(2-hydroxyethyl methacrylate)/polystyrene (PHEMA/PS) composite microspheres were produced by emulsifier-free seeded emulsion polymerization for styrene in the presence of PHEMA seed particles. Effects of the surface characteristics of the PHEMA/PS composite microspheres on the adsorption immobilization of trypsin and on its enzymatic activity were discussed. Above 5 mol% of HEMA content, trypsin molecules adsorbed had high activity, 65–100% of the activity of free trypsin. The excellence of the composite microspheres as a carrier for trypsin seems to be closely related with the surface heterogeneity consisting of both hydrophilic and hydrophobic parts.     

Mechanistic study on analyte focusing by dynamic pH junction in capillary electrophoresis using computer simulation

Dynamic pH junction is an on-line preconcentration method in capillary electrophoresis (CE) based on electrokinetic focusing of weakly ionic analytes with in large sample volumes in a multisection electrolyte system. In this report, experiments and computer simulations were performed to gain a better insight of the analyte focusing mechanism when a dynamic pH junction was used. A computer program, SIMUL, was used to simulate the band-narrowing process of a group for phenol derivatives under optimized buffer conditions, which were compared with experimental results. Computer simulations revealed the formation of a sharp moving pH boundary within the sample zone causing efficient focusing of long plugs of weakly acidic analytes based on their pKa. These studies offered useful information for understanding the band-narrowing process by control of the depth and lifetime of the moving pH boundary as a function of analyte pKa, sample pH, and injection length. The change in pH of the sample within the capillary was also estimated by measuring the absorbances of an analyte at two different wave-lengths. Optimization of analyte focusing resulted in enhanced detection responses of about 60-450-fold in terms of peak heights for some phenol derivatives' relation to conventional injections. Dynamic pH junction represents a novel approach to control band dispersion (peak width) and selectivity (mobility) of specific analytes for high-resolution CE separations.     

环境·流线·空间——第三届亚洲冬季运动会综合体育馆设计特点分析

文章介绍了１９９６年２月在哈尔滨举行的第三届亚洲冬季运动会的综合体育馆。该馆是从环境分析，整体流线安排及室内外空间的处理等方面进行设计的。作者通过对环境，流线和空间的探索，总结出在设计中应着重注意的几个问题及有关的解决办法。并希望它将有益于未来体育馆的设计。     

哈尔滨近代建筑的形态母题及美学意匠1、2

本文从形态学的角度通过对哈尔滨近代建筑顶部形态（屋顶突出物和女儿墙）的细部构成的归纳、抽象，概括出其母题的基本类型；并根据统计结果，得出具有普遍性的形态母题。通过对整体关系的抽象，概括出其模式的基本类型；并根据统计结果，得出具有普遍性的关系模式；在上述定量分析的基础上，结合美学原理，对其所蕴含的美学意匠作了分析。     

Enhancing TRU burning and Am transmutation in Advanced Recycling Reactor

This paper presents about conceptual designs of Advanced Recycling Reactor (ARR) focusing on enhancement in transuranics (TRU) burning and americium (Am) transmutation. The design has been conducted in the context of the Global Nuclear Energy Partnership (GNEP) seeking to close nuclear fuel cycle in ways that reduce proliferation risks, reduce the nuclear waste in the US and further improve global energy security. This study strives to enhance the TRU burning and the Am transmutation, assuming the development of related technologies in this study, while the ARR based on mature technologies was designed in the previous study. It has followed that the provided TRU burning core is designed to burn TRU at 28 kg/TW_thh, by adding moderator pins of B₄C (Enriched B-11) and the Am transmutation core will be able to transmute Am at 34 kg/TW_thh, by locating Am blanket of AmN around the TRU burning core. It indicates that these concepts improve TRU burning by 40-50% than the previous core and can transmute Am effectively, keeping the void reactivity acceptable.     

Thermal conductivity degradation analyses of LWR MOX fuel by the quasi-two phase material model

The temperature measurements of mixed oxide (MOX) and UO₂ fuels during irradiation suggested that the thermal conductivity degradation rate of the MOX fuel with burnup should be slower than that of the UO₂ fuel. In order to explain the difference of the degradation rates, the quasi-two phase material model is proposed to assess the thermal conductivity degradation of the MIMAS MOX fuel, which takes into account the Pu agglomerate distributions in the MOX fuel matrix as fabricated. As a result, the quasi-two phase model calculation shows the gradual increase of the difference with burnup and may expect more than 10% higher thermal conductivity values around 75 GWd/t. While these results are not fully suitable for thermal conductivity degradation models implemented by some industrial fuel manufacturers, they are consistent with the results from the irradiation tests and indicate that the inhomogeneity of Pu content in the MOX fuel can be one of the major reasons for the moderation of the thermal conductivity degradation of the MOX fuel.