Sources of nitrate and ammonium contamination in groundwater under developing Asian megacities

The status of nitrate (NO(3)(-)), nitrite (NO(2)(-)) and ammonium (NH(4)(+)) contamination in the water systems, and the mechanisms controlling their sources, pathways, and distributions were investigated for the Southeast Asian cities of Metro Manila, Bangkok, and Jakarta. GIS-based monitoring and dual isotope approach (nitrate delta(15)N and delta(18)O) suggested that human waste via severe sewer leakage was the major source of nutrient contaminants in Metro Manila and Jakarta urban areas. Furthermore, the characteristics of the nutrient contamination differed depending on the agricultural land use pattern in the suburban areas: high nitrate contamination was observed in Jakarta (dry fields), and relatively lower nutrients consisting mainly of ammonium were detected in Bangkok (paddy fields). The exponential increase in NO(3)(-)-delta(15)N along with the NO(3)(-) reduction and clear delta(18)O/delta(15)N slopes of NO(3)(-) ( approximately 0.5) indicated the occurrence of denitrification. An anoxic subsurface system associated with the natural geological setting (e.g., the old tidal plain at Bangkok) and artificial pavement coverage served to buffer NO(3)(-) contamination via active denitrification and reduced nitrification. Our results showed that NO(3)(-) and NH(4)(+) contamination of the aquifers in Metro Manila, Bangkok, and Jakarta was not excessive, suggesting low risk of drinking groundwater to human health, at present. However, the increased nitrogen load and increased per capita gross domestic product (GDP) in these developing cities may increase this contamination in the very near future. Continuous monitoring and management of the groundwater system is needed to minimize groundwater pollution in these areas, and this information should be shared among adjacent countries with similar geographic and cultural settings.     

Effect of humidity on human comfort and productivity after step changes from warm and humid environment

Subjective experiments were conducted to evaluate the effects of humidity on human comfort and productivity under transient conditions from hot and humid environment to thermally neutral condition. Two climate chambers, “Chamber 1” and “Chamber 2”, adjoined each other were used for this study. Subjects were exposed to 30 °C/70%RH air in Chamber 1 for 15 min with 2.0 met of metabolic rate. Then they moved into Chamber 2, where 4 humidity conditions, 30, 40, 50 and 70%RH were examined. Air temperature was adjusted to keep SET* constant at 25.2 °C for all conditions. Subjects were exposed in Chamber 2 for 180 min performing 2 kinds of simulated office work.

Positive effects of low humidity on subjective pleasantness were found under transient condition at low humidity due to more evaporation from human body, while no significant difference in thermal sensation and humidity sensation among 4 relative humidity levels was obtained. Subjective performance was found to be at the same level under all conditions. However, subjects reported to be more tired at 70%RH after humidity step change.     

Experimental visualization of lithium diffusion in LixFePO4

Chemical energy storage using batteries will become increasingly important for future environmentally friendly ('green') societies. The lithium-ion battery is the most advanced energy storage system, but its application has been limited to portable electronics devices owing to cost and safety issues. State-of-the-art LiFePO4 technology as a new cathode material with surprisingly high charge-discharge rate capability has opened the door for large-scale application of lithium-ion batteries such as in plug-in hybrid vehicles. The scientific community has raised the important question of why a facile redox reaction is possible in the insulating material. Geometric information on lithium diffusion is essential to understand the facile electrode reaction of LixFePO4 (0相似文献   

Fabrication of hierarchically porous spherical particles by assembling mesoporous silica nanoparticles via spray drying

A new type of hierarchically porous materials is fabricated by assembling mesoporous nanoparticles via spray drying. Well-dispersed mesostructured silica nanoparticles (MSN), whose particle size distribution was narrow in the range of 20 nm and 50 nm, were prepared by a thermal deposition method. By spray drying a MSN suspension, MSN were assembled into spherical secondary particles. After calcination, the spherical particles have two types of mesopores, mesopores of 3 nm in size inside of calcined MSN and larger inter-nanoparticle mesopores of about 15-20 nm. This hierarchical pore system should provide nanospaces for efficient mass transport of guest species with different sizes.     

Corneal critical barrier against the penetration of dexamethasone and lomefloxacin hydrochloride: evaluation by the activation energy for drug partition and diffusion in cornea

The cornea is a solid barrier against drug permeation. We searched the critical barrier of corneal drug permeation using a hydrophobic drug, dexamethasone (DM), and a hydrophilic drug, lomefloxacin hydrochloride (LFLX). The activation energies for permeability of DM and LFLX across the intact cornea were 88.0 and 42.1 kJ/mol, respectively. Their activation energies for permeability across the cornea without epithelium decreased to 33.1 and 16.6 kJ/mol, respectively. The results show that epithelium is the critical barrier on the cornea against the permeation of a hydrophobic drug of DM as well as a hydrophilic drug of LFLX. The activation energy of partition for DM (66.8 kJ/mol) was approximately 3-fold larger than that of diffusion (21.2 kJ/mol). The results indicate that the partition for the hydrophobic drug of DM to the corneal epithelium is the primary barrier. Thermodynamic evaluation of activation energy for the drug permeation parameters is a good approch to investigate the mechanism of drug permeability.     

Oxidation state of palladium as a factor controlling catalytic activity of Pd/SiO2–Al2O3 in propane combustion

The oxidation state of palladium on SiO₂–Al₂O₃ used for propane combustion was examined by XPS and XRD, and the correlation of the catalytic activity with the oxidation state of palladium was systematically studied. The propane conversion over 5 wt% Pd/SiO₂–Al₂O₃ was measured in the range 1.0≤S≤7.2 (S is defined as [O₂]/5[C₃H₈] based on stoichiometric ratio). The propane conversion strongly depended on the S value and reached the maximum at S=5.5. The oxidation state of palladium also changed with the S value; palladium particles were more oxidized under the reaction mixture of higher S value. On the sample used for the reaction at S=5.5, both of metallic palladium and palladium oxide were found. It is concluded that partially oxidized palladium which has optimum ratio of metallic palladium to palladium oxide shows the highest catalytic activity in propane combustion.     

Processing of Oriented K(Ta,Nb)O3 Films Using Chemical Solution Deposition

K(Ta,Nb)O₃ (KTN) thin films have been prepared by the chemical solution deposition method. KTN precursors consisted of a uniform mixture of K[Ta(OC₂H₅)₆] and K[Nb(OC₂H₅)₆] with interaction at the molecular level. Perovskite KTN thin films with the desired composition (Ta/Nb = 65/35, 50/50, and 35/65) were synthesized from the precursor solutions by the dip coating method. KTN thin films with (100) preferred orientation were successfully synthesized on MgO(100) and Pt(100)/MgO(100) substrates. X-ray pole figure measurements showed that grains of KTN films had a prominent three-dimensional regularity on MgO(100) and Pt(100)/MgO(100) surfaces. The Curie temperatures of KTN films decreased with increasing Ta/Nb ratio. Typical P-E hysteresis loops were observed for KTN thin films of three compositions on Pt(100)/MgO(100) substrates. The values of remanent polarization ( P _r) of KTN films increased as the Ta/Nb ratio changed from 65/35 to 35/65.     

Development of effective detection method for Coxiella burnetii in mayonnaise by real-time PCR and investigation of C. burnetii contamination in commercial mayonnaise in Tokyo

A PCR method for the effective detection of Coxiella burnetii in commercially available mayonnaise was developed. Sample preparations were isolated from 50 g portions of each mayonnaise product by four successive extraction steps in phosphate buffer with 2.0 M NaCl. These extracts were then centrifuged at 20,000 x g for 60 min. DNA was isolated from the solution containing the precipitate with a commercial kit, and amplified quantitatively using real-time PCR that targeted the com1 region of C. burnetii. The recoveries of C. burnetii from 2 kinds of commercial mayonnaise specimens, with a baseline control of 1 x 10(7) particles of the Nine Mile phase II strain, were 85.0 +/- 6.0% and 72.0 +/- 0.4%, respectively. The determination limit of this method was 500 C. burnetii particles per 50 g of mayonnaise. The DNA specimens isolated from 50 different commercial mayonnaise samples sold in Tokyo using this method were amplified using both nested PCR and real-time PCR. No contamination by C. burnetii was detected in any of the mayonnaise samples.     

Novel drug delivery system by surface modified magnetic nanoparticles

In the recent progress of gene and cell therapy, novel drug delivery system (DDS) has been required for efficient delivery of small molecules/drugs and also the safety for clinical usage. We have already developed the unique transfection technique by preparing magnetic vector and using permanent magnet. This technique can improve the transfection efficiency. In this study, we directly associated plasmid DNA with magnetic nanoparticles, which can potentially enhance their transfection efficiency by magnetic force. Magnetic nanoparticle, such as magnetite, its average size of 18.7 nm, can be navigated by magnetic force and is basically consisted with oxidized Fe that is commonly used as the supplement drug for anemia. The magnetite particles coated with protamine sulfate, which gives a cationic surface charge onto the magnetite particle, significantly enhanced the transfection efficiency in vitro cell culture system. The magnetite particles coated with protamine sulfate also easily associated with cell surface, leading to high magnetic seeding percentage. From these results, it was found that the size and surface chemistry of magnetic particles would be tailored to meet specific demands on physical and biological characteristics accordingly. Overall, magnetic nanoparticles with different surface modification enhance the association with plasmid DNA and cell surface as well as HVJ-E, which potentially help to improve the drug delivery system.     

Amorphous nanosilicas induce consumptive coagulopathy after systemic exposure

We previously reported that well-dispersed amorphous nanosilicas with particle size 70 nm (nSP70) penetrate skin and produce systemic exposure after topical application. These findings underscore the need to examine biological effects after systemic exposure to nanosilicas. The present study was designed to examine the biological effects. BALB/c mice were intravenously injected with amorphous nanosilicas of sizes 70, 100, 300, 1000 nm and then assessed for survival, blood biochemistry, and coagulation. As a result, injection of nSP70 caused fatal toxicity, liver damage, and platelet depletion, suggesting that nSP70 caused consumptive coagulopathy. Additionally, nSP70 exerts procoagulant activity in vitro associated with an increase in specific surface area, which increases as diameter reduces. In contrast, nSP70-mediated procoagulant activity was absent in factor XII-deficient plasma. Collectively, we revealed that interaction between nSP70 and intrinsic coagulation factors such as factor XII, were deeply related to nSP70-induced harmful effects. In other words, it is suggested that if interaction between nSP70 and coagulation factors can be suppressed, nSP70-induced harmful effects may be avoided. These results would provide useful information for ensuring the safety of nanomaterials (NMs) and open new frontiers in biological fields by the use of NMs.