Supplementation effect of ectoine on thermostability of phytase

In this study, we elucidated the supplementation effect of compatible solutes on the thermostability of phytase, designated as PHYA II, which was encoded by the phytase gene phyA I (GeneBank AY013315) from Aspergillus ficuum As3.324 and expressed in Pichia pastoris GS115. When PHYA II in acetate buffer was heated at 90 degrees C for 15 min, more than 80% of the residual activity was retained by adding the cyclic amino acid ectoine, a representative compatible solute. Furthermore, the presence of ectoine led to an increase in the relative hydrolytic rate of sodium phytate by 15.7% with heating at 80 degrees C for 15 min. Among the compatible solutes examined, ectoine was confirmed to be the most efficient thermoprotectant for PHYA II.     

Origin of defect-insensitive emission probability in In-containing (Al,In,Ga)N alloy semiconductors

Group-III-nitride semiconductors have shown enormous potential as light sources for full-colour displays, optical storage and solid-state lighting. Remarkably, InGaN blue- and green-light-emitting diodes (LEDs) emit brilliant light although the threading dislocation density generated due to lattice mismatch is six orders of magnitude higher than that in conventional LEDs. Here we explain why In-containing (Al,In,Ga)N bulk films exhibit a defect-insensitive emission probability. From the extremely short positron diffusion lengths (<4 nm) and short radiative lifetimes of excitonic emissions, we conclude that localizing valence states associated with atomic condensates of In-N preferentially capture holes, which have a positive charge similar to positrons. The holes form localized excitons to emit the light, although some of the excitons recombine at non-radiative centres. The enterprising use of atomically inhomogeneous crystals is proposed for future innovation in light emitters even when using defective crystals.     

Application of a quick-freezing and deep-etching method to pathological diagnosis: a case of elastofibroma

A case of elastofibroma in a middle-aged Japanese woman was examined by the quick-freezing and deep-etching (QF-DE) method, as well as by immunohistochemistry and conventional electron microscopy. The slowly growing tumor developed at the right scapular region and was composed of fibrous connective tissue with unique elastic materials called elastofibroma fibers. A normal elastic fiber consists of a central core and peripheral zone, in which the latter has small aggregates of 10 nm microfibrils. By the QF-DE method, globular structures consisting of numerous fibrils (5-20 nm in width) were observed between the collagen bundles. We could confirm that they were microfibril-rich peripheral zones of elastofibroma fibers by comparing the replica membrane and conventional electron microscopy. One of the characteristics of elastofibroma fibers is that they are assumed to contain numerous microfibrils. Immunohistochemically, spindle tumor cells showed positive immunoreaction for vimentin, whereas alpha-smooth muscle actin, desmin, S-100 protein and CD34 showed negative immunoreaction. By conventional electron microscopy, the tumor cell had thin cytoplasmic processes, pinocytotic vesicles and prominent rough endoplasmic reticulum. Abundant intracytoplasmic filaments were observed in some tumor cells. Thick lamina-like structures along with their inner nuclear membrane were often observed in the tumor cell nuclei. The whole image of the tumor cell was considered to be a periosteal-derived cell, which would produce numerous microfibrils in the peripheral zone of elastofibroma fibers. This study indicated that the QF-DE method could be applied to the pathological diagnosis and analysis of pathomechanism, even for surgical specimens obtained from a patient.     

Clinical applications of the quick-freezing and deep-etching method to human diabetic nephropathy

Mesangial expansion and glomerular basement membrane (GBM) thickening were not different between normoalbuminuric (NA) and microalbuminuric (MA) type 2 diabetic patients. The quick-freezing and deep-etching (QF-DE) method allows us to examine three-dimensional ultrastructures of human renal glomeruli in vivo at high resolution. In the present study, the QF-DE method was applied to the renal biopsy from 6 type 2 diabetic patients without definable renal diseases other than diabetic nephropathy. Four patients were NA and the other two were MA. Three control specimens were normal parts in surgically resected kidneys of renal cell carcinoma. Replica membranes were prepared by the QF-DE method as previously described. By the QF-DE method, both GBM middle layer and mesangial matrix (MM) were composed of polygonal meshwork structures. The mesh pores of GBM and MM were more enlarged in size and irregular in shape in NA diabetic patients than those of the controls, and these ultrastructural changes became more obvious in MA patients. The diameters of mesh pores in the diabetic patients were significantly larger than those in the control subjects. In conclusion, the QF-DE method could be applied to needle renal biopsy and the present study has firstly clarified the difference of ultrastructural changes between NA and MA type 2 diabetic patients, which had not been disclosed by the conventional electron microscopy, were revealed by the QF-DE method.     

Multiplex PCR for simultaneous detection of Salmonella spp., Listeria monocytogenes, and Escherichia coli O157:H7 in meat samples

A multiplex PCR method was developed for simultaneous detection of Salmonella spp., Listeria monocytogenes, and Escherichia coli O157:H7 in meat samples. DNA detection sensitivity for this method was 10(3) CFU/ml for each pathogen. When this protocol was used for the detection of each of the above pathogenic bacteria in spiked pork samples, 1 cell per 25 g of inoculated sample could be detected within 30 h. In the samples of naturally contaminated meat, Salmonella spp., L. monocytogenes, and E. coli O157:H7 were detected over the same time period. Excellent agreement was obtained for the results of multiplex PCR and the conventional culture method, which suggests that the multiplex PCR is a reliable and useful method for rapid screening of meat products for Salmonella spp., L. monocytogenes, and E. coli O157:H7 contamination.     

Synthesis of Chiral Polyethers Containing Imidazolidinone Repeating Units and Application as Catalyst in Asymmetric Diels–Alder Reaction

In this study, enantiopure imidazolidinones containing two hydroxyphenyl groups were synthesized, and the Williamson synthesis of the chiral bisphenols thus prepared with dihalides afforded polyethers containing chiral imidazolidinone repeating units. These chiral imidazolidinone polyethers exhibited excellent catalytic activity in the asymmetric Diels–Alder reaction. With the use of these polymeric catalysts, enantioselectivities up to 99% were obtained, higher than those obtained by the corresponding monomeric imidazolidinone catalyst in homogeneous solution. The polymeric catalysts were found to be insoluble in commonly used organic solvents, and they could be repeatedly used without the loss of activity.

     

Fine dispersion of carbon black in fluorene‐based resin

The dispersion ability of fluorene‐based epoxy resin (FBE), bisphenol A based epoxy resin (PBE), fluorene‐based polyester (FBP), and polycarbonate (PC) in carbon black (CB) was evaluated. CB/FBE composite had a lower L value (reflectance, blackness) than that of CB/PBE composite, for the same CB content. Aggregations of CB in CB/FBE composites were much smaller than those in CB/PBE composites. The strong interaction between fluorene with cardo structure and CB resulted in a fine dispersion of CB in FBE. FBP had much higher dispersion ability of CB than PC. CB (50 wt%) was dispersed into FBP compared with the 10 wt% of CB dispersed in PC by melt blending. The effect of CB on the mechanical properties of FBP was much higher than that on PC due to fine dispersion of CB in FBP. The effect of CB addition on the T_g of FBP was also higher than that of CB on the T_g of PC. Computational simulation indicates that most stable energy between fluorene with a cardo structure and graphite structure was smaller than the energy between bisphenol A and graphite. It was also shown that the minimum energy appeared when the fluorene structure was almost parallel to the graphite plane. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Enantioselective Synthesis of Chiral Homoallyl Alcohols and Homoallylamines by Nucleophilic Addition of an Allylboron Reagent Modified by a Polymer‐Supported Chiral Ligand

Crosslinked polymer‐supported chiral N‐sulfonylamino alcohols 5–8 have been prepared by suspension polymerization of enantiopure N‐sulfonylamino alcohol monomers 1–4 with styrene and divinylbenzene. Polymer‐supported chiral allylboron reagents were prepared from the polymeric chiral ligands. Enantioselective additions of the polymer‐supported allylboron reagents to aldehydes and N‐(trimethylsilyl)imines have been successfully carried out in the heterogeneous system. The corresponding optically active homoallyl alcohols and homoallylamines were obtained in high yields with high enantioselectivities (up to 95% ee) which are almost the same as those obtained from homogeneous analogues. The polymer‐supported chiral ligands used were recovered easily and can be reused without any loss of activity.     

A Review on Current Nanofiber Technologies: Electrospinning,Centrifugal Spinning,and Electro-Centrifugal Spinning

Nanofiber-based products are widely used in the fields of public health, air/water filtration, energy storage, etc. The demand for nonwoven products is rapidly increasing especially after COVID-19 pandemic. Electrospinning is the most popular technology to produce nanofiber-based products from various kinds of materials in bench and commercial scales. While centrifugal spinning and electro-centrifugal spinning are considered to be the other two well-known technologies to fabricate nanofibers. However, their developments are restricted mainly due to the unnormalized spinning devices and spinning principles. High solution concentration and high production efficiency are the two main strengths of centrifugal spinning, but beaded fibers can be formed easily due to air perturbation or device vibration. Electro-centrifugal spinning is formed by introducing a high voltage electrostatic field into the centrifugal spinning system, which suppresses the formation of beaded fibers and results in producing elegant nanofibers. It is believed that electrospinning can be replaced by electro-centrifugal spinning in some specific application areas. This article gives an overview on the existing devices and the crucial processing parameters of these nanofiber technologies, also constructive suggestions are proposed to facilitate the development of centrifugal and electro-centrifugal spinning.