Review of Chemical Reactions in the NO Reduction by CO on Rhodium/Alumina Catalysts

The emissions of nitric oxide and carbon monoxide from internal combustion engines are of primary concern due to their impact on the environment and people's health. Since rhodium has proven to be an important catalyst for the reduction of nitric oxide by carbon monoxide, its accurate modeling is of significant value to industry. This paper reviews the literature with respect to this interaction in order to explain the history of the detailed reactions occurring on the surface. This review was accomplished in the absence of other species in order to focus the efforts and reduce the complexity of the task. In addition, this work presents an appropriate global reaction expression based on these detailed reactions for use in one-dimensional aftertreatment catalyst models.     

Phase Constitution During Sintering of Red Mud and Red Mud–Fly Ash Mixtures

The phase constitution during the sintering of pure red mud and red mud–fly ash mixtures was studied in the temperature range of 900°–1250°C. The phases formed at different sintering temperatures were analyzed by X-ray powder diffraction. The phases that are likely to form at equilibrium at any isotherm were predicted using the Gibbs free energy minimization technique and the databases provided in the FactSage software. Although the thermodynamic prediction is in reasonable agreement with the experimental results for the major phases, there is some disagreement regarding the minor phases, especially the more complex phases. The major limitation of the thermodynamic approach presently is the non-availability of thermodynamic data for several complex and multi-component solution phases.     

Polyaniline‐supported acid catalyst: Esterification of cinnamic acid with alcohols

Polyaniline‐supported acid salts such as polyaniline‐hydrochloride, polyaniline‐sulfate, and polyaniline‐nitrate were prepared by oxidation of aniline using benzoyl peroxide and ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalysts in the esterification of cinnamic acid with alcohols. Polyaniline‐sulfate salt was found to be the best catalyst for the esterification of cinnamic acid. The reusability, handling, and recovery of the catalyst were found to be good. The yield of the ester depended on the type of the polyaniline salt, amount of the catalyst, amount of alcohol, and both the time and the temperature of the reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1584–1590, 2005     

Feasibility of high performance in p-type Ge1−xBixTe materials for thermoelectric modules

GeTe is a promising candidate for the fabrication of high-temperature segments for p-type thermoelectric (TE) legs. The main restriction for the widespread use of this material in TE devices is high carrier concentration (up to ∼ 10²¹ cm⁻³), which causes the low Seebeck coefficient and high electronic component of thermal conductivity. In this work, the band structure diagram and phase equilibria data have been effectively used to attune the carrier concentration and to obtain the high TE performance. The Ge_1−xBi_xTe (x = 0.04) material prepared by the Spark plasma sintering (SPS) technique demonstrates a high power factor accompanied by moderate thermal conductivity. As a result, a significantly higher dimensionless TE figure of merit ZT = 2.0 has been obtained at ∼ 800 K. Moreover, we are the first to propose that application of the developed Ge_1−xBi_xTe (x = 0.04) material in the TE unicouple should be accompanied by SnTe and CoGe₂ transition layers. Only such a unique solution for the TE unicouple makes it possible to prevent the negative effects of high contact resistance and chemical diffusion between the segments at high temperatures.     

Microstructure and Mechanical Property Correlation of Mg-Si Alloys

Silicon - The present work aims at understanding the microstructure and mechanical property correlation of hypo (Mg-0.5, 0.7, 1.15 wt% Si) and hyper (Mg-2, 4, 6, 8 and 10 wt% Si) eutectic binary...     

Minocycline Loaded Hybrid Composites Nanoparticles for Mesenchymal Stem Cells Differentiation into Osteogenesis

Bone transplants are used to treat fractures and increase new tissue development in bone tissue engineering. Grafting of massive implantations showing slow curing rate and results in cell death for poor vascularization. The potentials of biocomposite scaffolds to mimic extracellular matrix (ECM) and including new biomaterials could produce a better substitute for new bone tissue formation. A purpose of this study is to analyze polycaprolactone/silk fibroin/hyaluronic acid/minocycline hydrochloride (PCL/SF/HA/MH) nanoparticles initiate human mesenchymal stem cells (MSCs) proliferation and differentiation into osteogenesis. Electrospraying technique was used to develop PCL, PCL/SF, PCL/SF/HA and PCL/SF/HA/MH hybrid biocomposite nanoparticles and characterization was analyzed by field emission scanning electron microscope (FESEM), contact angle and Fourier transform infrared spectroscopy (FT-IR). The obtained results proved that the particle diameter and water contact angle obtained around 0.54 ± 0.12 to 3.2 ± 0.18 µm and 43.93 ± 10.8° to 133.1 ± 12.4° respectively. The cell proliferation and cell-nanoparticle interactions analyzed using (3-(4,5-dimethyl thiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium inner salt) MTS assay (Promega, Madison, WI, USA), FESEM for cell morphology and 5-Chloromethylfluorescein diacetate (CMFDA) dye for imaging live cells. Osteogenic differentiation was proved by expression of osteocalcin, alkaline phosphatase activity (ALP) and mineralization was confirmed by using alizarin red (ARS). The quantity of cells was considerably increased in PCL/SF/HA/MH nanoparticles when compare to all other biocomposite nanoparticles and the cell interaction was observed more on PCL/SF/HA/MH nanoparticles. The electrosprayed PCL/SF/HA/MH biocomposite nanoparticle significantly initiated increased cell proliferation, osteogenic differentiation and mineralization, which provide huge potential for bone tissue engineering.     

Novel genetic algorithm for short-term scheduling of sequence dependent changeovers in multiproduct polymer plants

Polymer plants generally operate to produce different grades of product from the same reactor. Such systems commonly require short-term scheduling to meet market demand. One important requirement in continuous-time scheduling of such systems is to satisfy a variety of constraints, including identifying feasible sequences of the predecessor and successor jobs to effectively handle changeovers. In this study, a new genetic algorithm (GA) is proposed to solve such job sequencing problems. The proposed GA uses real-coded chromosome to represent job orders and their sequences in the schedule. The novelty is that the representation ensures that all constraints are satisfied a priori, except the sequence constraint which is handled by penalizing violations. Three important problems relevant to polymer industry are solved to obtain optimal schedules. The first deals with the sequencing constraint between individual product orders, the second with sequencing constraint between groups of product orders, while the third incorporates batching with scheduling.     

Graph theory augmented math programming approach to identify minimal reaction sets in metabolic networks

Bioprocesses are of growing importance as an avenue to produce chemicals. Microorganisms containing only desired catalytic and replication capabilities in their metabolic pathways are expected to offer efficient processes for chemical production. Realizing such minimal cells is the holy grail of metabolic engineering. In this paper, we propose a new method that combines graph-theoretic approaches with mixed-integer liner programming (MILP) to design metabolic networks with minimal reactions. Existing MILP based computational approaches are computationally complex especially for large networks. The proposed graph-theoretic approach offers an efficient divide-and-conquer strategy using the MILP formulation on sub-networks rather than considering the whole network monolithically. In addition to the resulting improvement in computational complexity, the proposed method also aids in identifying the key reactions to be knocked-out in order to achieve the minimal cell. The efficacy of the proposed approach is demonstrated using three case studies from two organisms, Escherichia coli and Saccharomyces cerevisiae.     

锌-三氧化二铬复合镀层的特性

采用由氧化锌12g/L、氢氧化钠94 g/L、2-氨基-3-羧基吡啶4.2 g/L、四乙烯五胺17g/L、三乙醇胺2g/L、专利表面活性剂0.5 g/L及碳三氧化二铬(粒径2μm)0～ 11 g/L组成的镀液,于温度50℃、pH 6.5和电流密度4A/dm2的条件下,在低碳钢上电镀Zn-Cr2O3复合镀层.其显微硬度采...     

Electrochemical oxidation of boron containing compounds on titanium carbide and its implications to direct fuel cells

Electrochemical oxidation of sodium borohydride (NaBH₄) and ammonia borane (NH₃BH₃) (AB) have been studied on titanium carbide electrode. The oxidation is followed by using cyclic voltammetry, chronoamperometry and polarization measurements. A fuel cell with TiC as anode and 40 wt% Pt/C as cathode is constructed and the polarization behaviour is studied with NaBH₄ as anodic fuel and hydrogen peroxide as catholyte. A maximum power density of 65 mW cm⁻² at a load current density of 83 mA cm⁻² is obtained at 343 K in the case of borhydride-based fuel cell and a value of 85 mW cm⁻² at 105 mA cm⁻² is obtained in the case of AB-based fuel cell at 353 K.