A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

Secondary web-flange interaction in framed-tube buildings

In the conventional plane-frame model of framed-tube buildings, only the primary interaction between the web frame and the flange frame is considered, through vertical shear transfer at corner columns. In addition to this, a secondary interaction takes place due to horizontal shear transfer at each floor level, through the floor slab having high in-plane rigidity. This interaction causes a discrepancy in member forces of a few bottom and top storeys. A simple modification is suggested in the form of an additional cantilever column connected to the conventional plane-frame model by axial force transfer members at every floor level. The improved model yields member forces in all the storeys that are very close to those obtained using 3D analysis.     

Air bearing design, optimization, stability analysis andverification for sub-25 nm flying

Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in ² areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions     

Adaptive solutions to the mutual exclusion problem

Summary Algorithms for mutual exclusion that adapt to the current degree of contention are developed. Afilter and a leader election algorithm form the basic building blocks. The algorithms achieve system response times that are independent of the total number of processes and governed instead by the current degree of contention. The final algorithm achieves a constant amortized system response time. Manhoi Choy was born in 1967 in Hong Kong. He received his B.Sc. in Electrical and Electronic Engineerings from the University of Hong Kong in 1989, and his M.Sc. in Computer Science from the University of California at Santa Barbara in 1991. Currently, he is working on his Ph.D. in Computer Science at the University of California at Santa Barbara. His research interests are in the areas of parallel and distributed systems, and distributed algorithms. Ambuj K. Singh is an Assistant Professor in the Department of Computer Science at the University of California, Santa Barbara. He received a Ph.D. in Computer Science from the University of Texas at Austin in 1989, an M.S. in Computer Science from Iowa State University in 1984, and a B.Tech. from the Indian Institute of Technology at Kharagpur in 1982. His research interests are in the areas of adaptive resource allocation, concurrent program development, and distributed shared memory.A preliminary version of the paper appeared in the 12th Annual ACM Symposium on Principles of Distributed ComputingWork supported in part by NSF grants CCR-9008628 and CCR-9223094     

The Einstein relation in nanostructured materials: simplified theory and suggestion for experimental determination

An attempt is made to study the Einstein relation for the diffusivity–mobility ratio (DMR) in quantum wells (QWs) and quantum well wires (QWWs) of tetragonal compounds on the basis of a newly formulated electron energy spectrum taking into account the combined influences of the anisotropies in effective electron mass, the spin–orbit splitting, and the presence of crystal field splitting, respectively. The results for quantum-confined III–V compounds form a special case of our generalized analysis. The DMR has also been studied for QWs and QWWs of II–VI and IV–VI materials. Taking QWs and QWWs of CdGeAs₂, InAs, CdS and PbSe as examples, it was found that the DMR increases with increasing carrier statistics and decreasing film thickness respectively in various oscillatory manners emphasizing the influence of dimensional quantizations and the energy band constants in different cases. An experimental method of determining the DMR in nanostructures with arbitrary dispersion laws has also been suggested and the present simplified analysis is in agreement with the suggested relationship. The well-known results for nanostructures with parabolic energy bands have also been obtained as special cases from this generalized analysis under certain limiting conditions.     

The electrochemical behaviour of nitrogen-containing austenitic stainless steel in methanolic solution

The corrosion behaviour of nitrogen-containing austenitic stainless steel in methanol containing different concentrations of H₂SO₄, HCl, LiCl and H₂SO₄ + HCl has been investigated using a potentiostatic polarization method. The cathodic reaction in the H₂SO₄, HCl and H₂SO₄ + HCl solutions was proton reduction whereas in the neutral LiCl solution, oxygen reduction was the predominant cathodic reaction. Active, passive and transpassive behaviours were observed only for higher concentrations of H₂SO₄ (0.01–2.0 M) due to the inherent water content. A cathodic loop, characterized by measured negative current in the anodic region, was also observed in solutions, in which the concentration of H₂SO₄ was 1.0 M or higher. The relative stability of the passive films decreased as the H₂SO₄ concentration increased, and thus the steel suffered from mild pitting corrosion. In the chloride environment, the rate of corrosion increased as the Cl⁻ ion concentration increased. The presence of acid along with Cl⁻ ions enhanced corrosion, and the corrosion rate increased significantly. The steel suffered from mild intergranular corrosion in acidic chloride solutions of methanol. In the H₂SO₄ + HCl solutions, passive films were only formed when the H₂SO₄ to HCl concentration ratio was greater than ∼10:1.     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.