A 950-MHz rectifier circuit for sensor network tags with 10-m distance

This paper presents a 950-MHz wireless power transmission system and a high-sensitivity rectifier circuit for ubiquitous sensor network tags. The wireless power transmission offers a battery-life-free sensor tag by recharging the output power of a base station into a secondary battery implemented with the tag. For realizing the system, a high-sensitivity rectifier with dynamic gate-drain biasing has been developed in a 0.3-/spl mu/m CMOS process. The measurement results show that the proposed rectifier can recharge a 1.2-V secondary battery over -14-dBm input RF power at a power conversion efficiency of 1.2%. In the proposed wireless system, this sensitivity corresponds to 10-m distance communication at 4-W output power from a base station.     

Magnetization distribution of magnetic vortex of amorphous FeSiB investigated by electron holography and computer simulation

The three-dimensional spin structure of the magnetic vortex of FeSiB, an amorphous soft magnetic material, was investigated by holography observation and computer simulation. Magnetization distribution in the neighborhood of the vortex center was estimated from the phase distribution obtained by holography observation. To confirm this magnetization distribution, sample-tilting experiments were performed: when the sample was tilted with respect to the electron beam direction, the phase-image center was found to shift along the tilting axis. Finite-element computer simulation was carried out to estimate the amount of shifts of the phase-image center in the sample tilting from the experimental magnetization distributions in the no sample-tilting conditions. We found that the simulated shifts of the phase-image center were in good agreement with those in the sample-tilting experiment, thus confirming the magnetization distribution near the vortex center obtained by holography observation.     

Development of a Cyclogyro-Based Flying Robot With Variable Attack Angle Mechanisms

This paper presents an experimental study on the development of a cyclogyro-based flying robot with a new variable angle of attack mechanism. A cyclogyro is a flying machine supported in the air by power-driven rotors that rotate about a horizontal axis, like the paddle-wheels of a steamboat. Machines of this type have been designed by some companies but there has been no record of any successful flights. Our design starts with a new variable angle of attack mechanism with an eccentric (rotational) point in addition to a rotational point connecting to a motor. The main feature of the mechanism with the eccentric rotational point is the ability to change attack of angles in accordance with the wing positions (as determined by the rotational angles of the cyclogyro) without actuators. The design parameters (wing span, the number of wings, and eccentric distance) of the flying robot are determined through a series of experiments. Experimental results show that the cyclogyro-based flying robot with the new variable angle of attack mechanism is capable of generating sufficient lift force for flying.     

Ytterbium-decreasing Streptomyces sp. and its naphthoquinone-pigment production in the presence of rare-earth elements

We screened for oligotrophic microorganisms capable of decreasing the concentration of ytterbium (Yb), a representative of the heavy rare-earth elements, in a culture medium. From 476 strains of oligotrophic microorganisms (grown on 1/100 diluted nutrient agar) isolated from soil and river water samples, 5 strains capable of reducing the concentration of Yb in diluted nutrient broth containing 5 ppm Yb were selected. Among them, a strain capable of reducing the concentration of all rare-earth elements to a great extent was identified as Streptomyces sp. (strain YB-1). This strain produced redish-purple pigment(s) only in the presence of rare earths, but not in that of other metals. The pigment was extracted with ethyl acetate and purified by a series of column chromatography steps. From the results of structural analysis using ultraviolet or infrared absorption spectrometry and 13C-NMR, the pigment was determined to be a kind of naphthoquinone similar to nanaomycin produced by a Streptomyces sp. These results suggested that rare earths might affect the physiological activity of this strain.     

Growth energetics of Lactococcus lactis subsp. lactis biovar diacetylactis in cometabolism of citrate and glucose

Certain strains of lactic acid bacteria present in commercial cheese starters, characterized by faint transparent colonies on an agar plate containing 1 mg kg ⁻¹ crystal violet (CVT), were identified as Lactococcus lactis subsp. (ssp) lactis biovar diacetylactis. The effect of citrate on the growth of these strains (CVT strains) in the presence of glucose was studied, in comparison with L. lactis strains. Molar growth yield from glucose (Y_G, g dry weight/mole of glucose consumed) for CVT strains grown on glucose plus citrate was significantly higher than the control (i.e. without citrate), but not for other L. lactis strains tested. Enhanced Y_G was also observed at a pH-controlled experiment, indicating that enhanced Y_G did not result from a buffering effect of citrate. CVT strains, in contrast to other strains of the same species, were shown to obtain enough energy to enhance Y_G on glucose–citrate mixtures.     

Vectorial finite-element method without spurious solutions for dielectric waveguide problems

A new vectorial finite-element method for the analysis of dielectric waveguide problems is formulated in terms of all three components of the magnetic field H. In this approach, the relation div H = 0 is satisfied and the spurious non-physical solutions do not appear.     

Planar lightwave integrated circuits with embedded actives for board and substrate level optical signal distribution

This paper explores design options for planar optical interconnections integrated onto boards, discusses fabrication options for both beam turning and embedded interconnections to optoelectronic devices, describes integration processes for creating embedded planar optical interconnections, and discusses measurement results for a number of integration schemes that have been demonstrated by the authors. In the area of optical interconnections with beams coupled to and from the board, the topics covered include integrated metal-coated polymer mirrors and volume holographic gratings for optical beam turning perpendicular to the board. Optical interconnections that utilize active thin film (approximately 1-5 /spl mu/m thick) optoelectronic components embedded in the board are also discussed, using both Si and high temperature FR-4 substrates. Both direct and evanescent coupling of optical signals into and out of the waveguide are discussed using embedded optical lasers and photodetectors.     

A 150 ns 16-Mb CMOS SRAM with interdigitated bit-line architecture

Circuit techniques for a reduced-voltage-amplitude data bus, fast access 16-Mb CMOS SRAM are described. An interdigitated bit-line architecture reduces data bus line length, thus minimizing bus capacitance. A hierarchical sense amplifier consists of 32 local sense amplifiers and a current sense amplifier. The current sense amplifier is used to reduce the data bus voltage amplitude and the sensing of the 16-b data bus signals in parallel. Access time of 15 ns and an active power of 165 mW were achieved in a 16-Mb CMOS SRAM. A split-word-line layout memory cell with double-gate pMOS thin-film transistors (TFTs) keeps the transistor width stable while providing high-stability memory cell characteristics. The double-gate pMOS TFT also increases cell-storage node capacitance and soft-error immunity     

Multi-oxide layer structure for single-mode operation invertical-cavity surface-emitting lasers

We propose a novel vertical-cavity surface emitting laser (VCSEL) with Al(Ga)As multi-oxide layer (MOX) structure for the purpose of enlarging window aperture maintaining single transverse mode operation. We have fabricated an InGaAs-GaAs VCSEL with the proposed MOX structure formed on GaAs (311)B substrate. We have performed a numerical simulation to investigate single-mode behavior of the proposed structure and showed a possibility of single-mode VCSEL's with a large active area. We have fabricated an 11-μm current aperture 960-nm wavelength VCSEL with this MOX structure. The threshold current and voltage were 1.0 mA and 2.0 V, respectively, which are comparable to those of conventional oxide VCSELs. In 8-μm aperture, single-mode operation was maintained with a driving current up to four times the threshold     

Electron-microscopic imaging of single-walled carbon nanotubes grown on silicon and silicon oxide substrates

Direct imaging of single-walled carbon nanotubes (SWNTs) suspended on pillar-patterned Si or SiO2 substrates is investigated using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The suspended nanotubes are successfully observed by direct TEM imaging and it is seen that they have either individual or bundles of SWNTs. Low energy (< or =2 keV) SEM produces high contrast images of suspended SWNTs. On the contrary, when SWNTs contact a SiO2 substrate, they are imaged using electron-beam induced current. The image brightness depends on the length of SWNTs.