Effect of Pore–Grain-Boundary Interactions on Discontinuous Grain Growth

Pore behavior as influenced by migration of an abnormal grain boundary was studied. The pore behavior during the discontinuous growth of hot-pressed spinel (MgAl₂O₄) — whether the pore can move attached to the grain boundary — is particularly governed by the pore size and the matrix grain size. These phenomena can be understood from the interaction between the pore and the abnormal grain boundary.     

Synthesis of 2-alkyloyl-1,4,3,6-dianhydrosorbitol-5-sulfates and evaluation of the surface active properties

New anionic surfactants 2-alkyloyl-1,4,3,6-dianhydrosorbitol-5-sulfates were synthesized by sulfation of 2-alkyloyl-1,4,3,6-dianhydrosorbitol. Studies on the surface active properties such as surface tension, dispersibility and emulsifiability of these surfactants were carried out. The results showed these surfactants are better dispersants and emulsifiers than Span 80 and Span 85.     

Controller design of desktop-size NC machine tool with multi-application function

In this paper, a desktop-size NC machine tool is first presented to have multi-application function, such as 3D-machining modes with and without handling a machining force, and profiling-control modes with and without using stick-slip motion. The NC machine tool consists of three single-axis devices with a high resolution of 1???m in position. A ball end mill called router bit or a thin wood-stick tool can be attached to the tip of the z-axis. The proposed machine tool realizes compliant motion required for the profiling control along a desired trajectory. The profiling-control mode can be applied to the lapping process of a metallic LED lens cavity. Next, a control strategy with fine stick-slip motion is further added to the profiling-control system to improve the lapping performance. The fine stick-slip motion is generated orthogonally to the direction of the tool movement. Generally, the stick-slip motion is an undesirable phenomenon to be eliminated in precision machineries. However, the proposed machine tool employs the fine stick-slip motion to partly regulate slight finishing energy. The effectiveness of the machine tool is demonstrated through an actual machining test of a wood material and a lapping test of a metallic LED lens cavity.     

Nuclear data sensitivity/uncertainty analysis for XT-ADS

The XT-ADS, an accelerator-driven system for an experimental demonstration, has been investigated in the framework of IP EUROTRANS FP6 project. In this study, the sensitivity and uncertainty analyses were performed to comprehend the reliability of the XT-ADS neutronic design.     

Effects of Concurrent Exposure to Chronic Restraint-Induced Stress and Total-Body Iron Ion Radiation on Induction of Kidney Injury in Mice

Concurrent exposure to ionizing radiation (IR) and psychological stress (PS) may affect the development of adverse health consequences in scenarios such as space missions, radiotherapy and nuclear accidents. IR can induce DNA damage and cell apoptosis in the kidneys, thus potentially leading to renal fibrosis, which is the ultimate outcome of various chronic progressive nephropathies and the morphological manifestation of a continuous coordinated response after renal injury. However, little is known regarding the effects of concurrent IR exposure and PS on renal damage, particularly renal fibrosis. In this study, using a chronic restraint-induced PS (CRIPS) model, we exposed Trp53-heterozygous mice to total body irradiation with 0.1 or 2 Gy ⁵⁶Fe ions on the eighth day of 28 consecutive days of a restraint regimen. At the end of the restraint period, the kidneys were collected. The histopathological changes and the degree of kidney fibrosis were assessed with H&E and Masson staining, respectively. Fibronectin (FN) and alpha smooth muscle actin (α-SMA), biomarkers of fibrosis, were detected by immunohistochemistry. Analysis of 8-hydroxy-2 deoxyguanosine (8-OHdG), a biomarker of oxidative DNA damage, was performed with immunofluorescence, and terminal deoxynucleotidyl transferase-mediated nick end labeling assays were used to detect apoptotic cells. Histopathological observations did not indicate significant structural damage induced by IR or CRIPS + IR. Western blotting revealed that the expression of α-SMA was much higher in the CRIPS + IR groups than the CRIPS groups. However, no differences in the average optical density per area were observed for FN, α-SMA and 8-OHdG between the IR and CRIPS + IR groups. No difference in the induction of apoptosis was observed between the IR and CRIPS + IR groups. These results suggested that exposure to IR (0.1 and 2 Gy ⁵⁶Fe ions), 28 consecutive days of CRIPS or both did not cause renal fibrosis. Thus, CRIPS did not alter the IR-induced effects on renal damage in Trp53-heterozygous mice in our experimental setup.     

Chemical Removal of CeO2 Segregated on the Surface of CeO2–ZrO2 Binary Oxides for Improvement of OSC

A chemical treatment to remove residual CeO₂ phase on CeO₂–ZrO₂ (CZ) solid solution was carried out. A CZ was treated by H₂O₂ for the reduction of Ce⁴⁺ to Ce³⁺ and then HNO₃ for the dissolution of Ce³⁺ compounds (H–CZ). H₂-TPR, TEM-EDX and XPS analyses revealed the removal of CeO₂ phase and the homogeneous distribution of Ce species. About 20% improvement in oxygen storage capacity (OSC) of H–CZ was confirmed at 773 K by the weight measurements under H₂/N₂ and air atmospheres, indicating that the HNO₃/H₂O₂ treatment was effective to avoid the deterioration of the OSC by segregated CeO₂ on the CZ binary oxides.     

Cause–effect analysis on Fukushima accident reports – What did McMaster undergraduate students learn?

In the ENG PHYS 4ES3 Course “Special Topics in Energy Systems (2014–2015)” in McMaster University, sixteen 4th-year undergraduate students studied the Fukushima accident, discussed the causes of accident and its impacts on the energy systems from the sustainability point of view, made the oral presentation and submitted the reports. In this paper, a cause–effect and causal-loop analysis was applied to the discussion in the reports, the diagram of cause–effect relationship was drawn, and the important problems were extracted from the diagram. It was found that the important problems and the diagram of cause–effect relationship McMaster undergraduate students considered were similar to the essential problems and the diagram Horii pointed out, although Interim Report of the Investigation Committee on the Accident at Fukushima Nuclear Stations of Tokyo Electric Power Company which Horii used was not adopted in the reports submitted by students.     

Polymers degradable under environmental conditions through end-modification of poly(α-methylstyrene) derivatives

To induce degradabilities in polymers in response to environmental conditions, the end-modification reactions of poly(α-methylstyrene) derivatives were carried out. When diphenylphosphine chloride was used as a modifier for the living end of para-substituted PMS, the coupling efficiency was ca. 50%. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(4-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, ω-2-phenylallyl PMS was prepared with almost quantitative functionality by the reaction of the living PMS with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl and ω-2-(4-tolyl)allyl PMS derivatives were synthesized. Based on thermogravimetric analysis, onset of the degradation temperature of the end-modified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(4-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(4-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the end unsaturated bond, which initiates the depolymerization of the polymer at rather low temperatures. Ionic degradation of these polymers was also investigated using butyllithium as an anionic initiator and methanesulfonic acid as a cationic initiator. Tendencies similar to the thermal degradation were observed. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through several mechanisms such as radical, anionic and cationic depolymerization reactions.     

Characteristics of pterional routes to basilar bifurcation aneurysm

In an attempt to clarify the characteristics of the pterional routes to the basilar bifurcation aneurysm, 65 consecutive surgical cases were retrospectively analyzed concerning the size of the aneurysm, the height of the aneurysm neck, the length of the clip blades, and the direction of clip application. Clipping was performed through the pterional route in 59 cases consisting of 14 opticocarotid and 45 retrocarotid routes. A subtemporal approach was performed for six low-positioned aneurysms. The opticocarotid approach was undertaken because of the following situations: 1) laterally protruded and/or highly sclerotic internal carotid artery (n = 8); 2) long, redundant A1 segment (n = 3); 3) an associated aneurysm of the internal carotid artery obstructing the retrocarotid space (n = 2); and 4) a short and/or large posterior communicating artery obstructing the retrocarotid space (n = 1). The range in height of the aneurysm neck was narrower in the opticocarotid approach (1-10 mm) than in the retrocarotid approach (-7-15 mm). The direction of clip application on the axial plane was more anteriorly deviated in the opticocarotid approach (41.4 +/- 12.8 degrees from the glabella-inion line) than in the retrocarotid approach (58.8 +/- 11.1 degrees; P = 0.01). The retrocarotid route (n = 45) was further subdivided into the medial or lateral retrocarotid routes, depending on the medial or lateral side to the posterior communicating artery, respectively. The medial retrocarotid approach (n = 9) made it possible to reach relatively high-positioned aneurysms (7.0 +/- 3.9 mm) compared with the lateral retrocarotid approach (4.2 +/- 4.7 mm; n = 29).(ABSTRACT TRUNCATED AT 250 WORDS)     

Low resistivity transparent conducting Al-doped ZnO films prepared by pulsed laser deposition

A series of AZO films were grown on glass substrates by a method of pulsed laser deposition using a split target divided into AZO (Al₂O₃: 1 wt.%) and AZO (Al₂O₃: 2 wt.%). The film deposition took place at a substrate temperature of 230 °C within a magnetic field applied perpendicularly to the plume. To suppress the droplet generation caused by the intense laser energy, the laser energy density was reduced to 0.75 J/cm² (15 mJ). For an approximately 280-nm thick-AZO film grown at a target-to-substrate distance of 25 mm, we obtained the lowest resistivity of 8.54×10⁻⁵ Ω·cm and an average transmittance of more than 88% in the visible range. In the cross-sectional TEM observation and XRD spectra, the regularity in the crystal growth was generated immediately from the interface between the substrate and the film.