Switching characteristics of vacuum gap switch employing UV‐laser triggering

The switching time and arc‐ignition probability of a sustained main discharge in a laser trigger vacuum gap were measured. The third harmonic beam of an Nd:YAG pulse laser (wavelength 355 nm, energy 5 mJ/pulse, power density 4 × 10⁷ W/cm²) was used to trigger the gap. The main electrodes 85 mm in diameter were made of oxygen‐free copper. The gap length was 1.6 mm and the experimental chamber was evacuated to about 1.3 × 10⁴ Pa by a turbomolecular pump. The UV beam from the laser was focused at normal incidence onto the grounded cathode. The switching time decreased and the arc‐ignition probability increased with increasing applied voltage. The switching time was 326 ns at 15 kV with a circuit inductance of 107 μH. Its jitter was 24.8 ns. The advantageous results obtained with the UV beam are compared to the previously reported data on triggered vacuum gaps. © 2000 Scripta Technica, Electr Eng Jpn, 132(3): 8–13, 2000     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

Study on environmental effect on fatigue and creep-fatigue strength of 316FR stainless steel in sodium at elevated temperature

Low-carbon 316 stainless steel with medium-nitrogen (316FR) is considered as the principal structural material for next generation fast breeder reactor (FBR) plants in Japan. The material strength standard and the creep-fatigue life evaluation method for 316FR have been developed. However, they are based on the results of material tests in air, while actual structural material will be used mainly in liquid sodium environment in the plants. In order to clarify the environmental effect, cyclic bending tests were carried out with and without hold time in sodium. Tested materials were 316FR and conventional 304 and 316 stainless steels. Weld metal of 316FR was also tested. As a result, it was found that fatigue and creep-fatigue lives of 316FR in sodium were larger than those in air and no explicit consideration of the environmental effect is necessary in design. It was also found that the life evaluation method based on the ductility exhaustion concept is applicable to creep-fatigue life assessment in sodium.     

Theoretical analysis of atomic-scale friction in frictional-force microscopy

We perform a theoretical analysis of frictional-force microscopy(FFM) images of a cleaved graphite surface. The Tomlinson model with a single-atom tip is powerful for reproducing experimental FFM images. A mapping relation between the tip atom position and the cantilever basal position obtained by a stable equilibrium condition, gives a clear explanation of the physical meaning of FFM image patterns. This revised version was published online in June 2006 with corrections to the Cover Date.     

CW operation at - 10°C for InGaAlP visible light laser diodes grown by MOCVD

CW operation at - 10°C for InGaP/InGaAlP double heterostructure (DH) laser diodes has been achieved for the first time. The DH wafers were grown by low-pressure metalorganic chemical vapour deposition using methyl metalorganics as the source of group III elements. Under room-temperature pulsed operation, the lasing wavelength was 663 nm and the lowest threshold current density was 7.8 kA/cm2. The CW characteristic temperature T0 was 63 K at around -30°C.     

Oxide ionic conductivities of apatite-type lanthanum silicates and germanates and their possibilities as an electrolyte of lower temperature operating SOFC

Electrical properties of La_xM₆O_12+1.5x (M = Si, Ge) as an electrolyte for solid oxide fuel cell (SOFC) have been investigated. In La_xSi₆O_12+1.5x and La_xGe₆O_12+1.5x of x = 8–11, the highest conductivities were achieved at x = 9.7 (La_9.7Si₆O_26.55) and x = 9.0 (La_9.0(GeO₄)₆O_1.5), respectively. The conductivity of La_9.0(GeO₄)₆O_1.5 was higher than that of La_9.7Si₆O_26.55 in a temperature region higher than 700 °C, and the conductivity (2.4 × 10⁻³ S cm⁻¹) of La_9.7Si₆O_26.55 at 400 °C was higher than that (8.3 × 10⁻⁵ S cm⁻¹) of La_9.0(GeO₄)₆O_1.5. The power densities of SOFC (H₂ | Pt | electrolyte (thickness: 1 mm) | Pt | O₂) using La_9.0(GeO₄)₆O_1.5 as an electrolyte were 14.3 mW cm⁻² (700 °C) and 24.0 mW cm⁻² (800 °C). The corresponding SOFC using La_9.7Si₆O_26.55 was found to work even at lower temperatures of 400 and 500 °C with power densities of 0.011 and 0.12 mW cm⁻². The SOFC (H₂ | Ni–Sm_0.2Ce_0.8O_1.9 | electrolyte | Ba_0.5Sr_0.5Co_0.8Fe_0.2O_2.5 | air) using 0.3 mm thickness La_9.7Si₆O_26.55 electrolyte gave the 3.4 mW cm⁻² power density at 500 °C.     

In utero exposure to a low concentration of diesel exhaust affects spontaneous locomotor activity and monoaminergic system in male mice

Background

Epidemiological studies suggest that inhalation of carbonaceous particulate matter from biomass combustion increases susceptibility to bacterial pneumonia. In vitro studies report that phagocytosis of carbon black by alveolar macrophages (AM) impairs killing of Streptococcus pneumoniae. We have previously reported high levels of black carbon in AM from biomass smoke-exposed children and adults. We therefore aimed to use a mouse model to test the hypothesis that high levels of carbon loading of AM in vivo increases susceptibility to pneumococcal pneumonia.

Methods

Female outbred mice were treated with either intranasal phosphate buffered saline (PBS) or ultrafine carbon black (UF-CB in PBS; 500 μg on day 1 and day 4), and then infected with S. pneumoniae strain D39 on day 5. Survival was assessed over 72 h. The effect of UF-CB on AM carbon loading, airway inflammation, and a urinary marker of pulmonary oxidative stress was assessed in uninfected animals.

Results

Instillation of UF-CB in mice resulted a pattern of AM carbon loading similar to that of biomass-smoke exposed humans. In uninfected animals, UF-CB treated animals had increased urinary 8-oxodG (P = 0.055), and an increased airway neutrophil differential count (P < 0.01). All PBS-treated mice died within 72 h after infection with S. pneumoniae, whereas morbidity and mortality after infection was reduced in UF-CB treated animals (median survival 48 h vs. 30 h, P < 0.001). At 24 hr post-infection, UF-CB treated mice had lower lung and the blood S. pneumoniae colony forming unit counts, and lower airway levels of keratinocyte-derived chemokine/growth-related oncogene (KC/GRO), and interferon gamma.

Conclusion

Acute high level loading of AM with ultrafine carbon black particles per se does not increase the susceptibility of mice to pneumococcal infection in vivo.     

Impact of fertilizer on a small watershed of Lake Biwa: use of sulfur and strontium isotopes in environmental diagnosis

Sulfur and strontium isotopes (delta(34)S and (87)Sr/(86)Sr) were determined in 39 river water samples collected over three different cultivation periods (April, May, and June), and in several materials used for comparison (fertilizers, detergents, soils, irrigation and agricultural waters), to evaluate the impact of fertilizers on a small agricultural watershed of Lake Biwa, in central Japan. delta(34)S values in river water decreased (from +5.8 to -2.0 per thousand) with increasing SO(4) concentrations (3.8 to 93.2 ppm) from upstream to downstream of the watershed. Comparison of river water S isotopes with those of possible source materials indicates that the enrichment of SO(4) can be attributed to the dissolution of two kinds of fertilizers: (1) compound fertilizers commonly used in this area and (2) ammonium sulfate which is applied on a small scale. In contrast, (87)Sr/(86)Sr values of river water decreased with time from April (avg. 0.71163), through May (avg. 0.71139), to June (avg. 0.71127). The tendency of the sample plots on the (87)Sr/(86)Sr vs. 1/Sr diagram suggests a time-dependent increase in the contribution of soil water to the river, which is partly affected by the Sr-bearing fertilizers. It is suggested that a maximum of 25% of dissolved Sr is derived from these fertilizers, while more than 75% of it is of rock origin. Mass balance calculations permitted us to evaluate the proportion of fertilizer contribution in each river. Combined use of S and Sr isotopes together with concentration data could be a new environmental diagnosis technique for rivers and soils in localized watersheds.