Demulsification of oil-in-water emulsion under freezing conditions: Effect of crystal structure modifier

The demulsification of oil-in-water (O/W) emulsions under freezing conditions is connected to fat crystallization in the oil droplet. Therefore, demulsification can be prevented by the use of oil with a low melting point, and also by lowering the O/W ratio. However, an oil with a low melting point, such as sunflower, is rather expensive, and the O/W ratio has a significant effect on the texture of emulsions. We searched for an oil that is suitable for the production of a freeze-stable emulsion and found that soybean oil has unique characteristics. Normally, emulsions are more unstable at lower temperatures; soybean oil emulsion is unstable at −10°C and stable at −20°C. This unique characteristic results from the following two reasons. First, the solid fat content of soybean oil is almost the same at −10 and −20°C. Second, small crystals form a larger network over a period of time, and the higher temperature promotes faster restructuring. This structure formation was microscopically observed with the use of a thermostated stage. Structure formation was suppressed with the addition of a crystal structure modifier, polyglycerol fatty acid full ester, which also suppressed coalescence.     

Photoswitching of electron transfer property of diarylethene–viologen linked molecular layer constructed on a hydrogen-terminated Si(111) Surface

An organic monolayer with diarylethene and viologen moieties as a photochromic and an electroactive group, respectively, was constructed on a hydrogen-terminated Si(111) surface by sequential surface reactions. Photoswitching behaviour of electron transfer from the Si electrode to viologen moiety, larger and smaller current after UV and visible irradiation, respectively, was observed. This photoswitching behaviour can be explained by a change in molecular conductivity of diarylethene moiety, which separates Si surface and viologen moiety, as a result of ring closing and opening induced by UV and visible irradiation, respectively.     

Compressive and ultrasonic properties of polyester/fly ash composites

The addition of hollow fillers having appropriate mechanical properties can decrease the density of the resulting composite, called syntactic foams, while concurrently improving its mechanical properties. In this study, hollow fly ash particles, called cenospheres, are used as fillers in polyester matrix material. Cenospheres are a waste by-product of coal combustion and, as such, are available at very low cost. In this study, the composites were synthesized by settling cenospheres in a glass tube filled with liquid polyester resin and subsequently curing the resin. This process resulted in a functionally graded structure containing a gradient in the cenosphere volume fraction along the sample height. Uniform radial sections were cut from each composite and were characterized to observe the relationship between cenosphere volume fraction and compressive properties of the composite. The composite was also tested using ultrasonic non-destructive evaluation method. Results show that the modulus of the composites increases with increasing cenosphere volume fraction. The modulus of composites containing more than 4.9 vol% cenosphere was found to be higher than the matrix resin. In general, the modulus of composites increased from 1.33 to 2.1 GPa for composites containing from 4.9–29.5 vol% cenospheres. The specific strength of the composite was found to be as high as 2.03 MPa/(kg/m³) compared to 0.96 MPa/(kg/m³) for the neat resin. Numerous defects present in fly ash particles caused a reduction in the strength of the composite. However, the reduction in the strength was found to be only up to 22%. Increase of over 110% in the specific modulus and only a slight decrease in the strength indicates the possibility of significant saving of weight in the structures using polyester/fly ash syntactic foams.     

Preparation and properties of negative thermal expansion Zr2WP2O12 ceramics

Using solid-state reaction method, Zr₂WP₂O₁₂ powder was synthesized for this study. The optimum heating condition was 1200 °C for 4 h. The obtained powder was compacted and sintered. The relative density of the Zr₂WP₂O₁₂ ceramics with no sintering additive was 60%. That of samples sintered with more than 0.5 mass% MgO was about 97%. The average grain size (D₅₀), as estimated from the polished surface of a sample sintered at 1200 °C for 4 h was about 1 μm. The obtained ceramics showed a negative thermal expansion coefficient of about −3.4 × 10⁻⁶ °C⁻¹. Young's modulus, Poisson's ratio, three-point bending strength, Vickers microhardness, and fracture toughness of the obtained ceramics were, respectively, 74 GPa, 0.25, 113 ± 13 MPa, 4.4 GPa and 2.3 MPa m^1/2.     

Adhesion and vacuum forming properties of tin-zinc thin films deposited on polyester film substrate

Sn-Zn alloy thin films were deposited on a polyester (PET) film substrate by co-evaporation and evaluated their surface, tensile and adhesion properties with a vacuum forming test and pull test.Relationship between the surface roughness and elemental composition of these thin films was evaluated. The surface roughness decreased with increase of the Sn content.The tensile property was estimated by observations of micro-cracks of the thin films due to a vacuum forming test. Sn-Zn alloy thin film, whose elemental composition is 85:15 (wt%), had high vacuum forming durability.The adhesion strength between the Sn-Zn alloy thin films and PET substrate was measured with a pull test apparatus. The pull strength decreased with increase of the Sn content.     

Development and Evaluation of a Robust Sandwich Immunoassay System Detecting Serum WFA-Reactive IgA1 for Diagnosis of IgA Nephropathy

Aberrant glycosylation of IgA1 is involved in the development of IgA nephropathy (IgAN). There are many reports of IgAN markers focusing on the glycoform of IgA1. None have been clinically applied as a routine test. In this study, we established an automated sandwich immunoassay system for detecting aberrant glycosylated IgA1, using Wisteria floribunda agglutinin (WFA) and anti-IgA1 monoclonal antibody. The diagnostic performance as an IgAN marker was evaluated. The usefulness of WFA for immunoassays was investigated by lectin microarray. A reliable standard for quantitative immunoassay measurements was designed by modifying a purified IgA1 substrate. A validation study using multiple serum specimens was performed using the established WFA-antibody sandwich automated immunoassay. Lectin microarray results showed that WFA specifically recognized N-glycans of agglutinated IgA1 in IgAN patients. The constructed IgA1 standard exhibited a wide dynamic range and high reactivity. In the validation study, serum WFA-reactive IgA1 (WFA+-IgA1) differed significantly between healthy control subjects and IgAN patients. The findings indicate that WFA is a suitable lectin that specifically targets abnormal agglutinated IgA1 in serum. We also describe an automated immunoassay system for detecting WFA+-IgA1, focusing on N-glycans.     

Deep Phenotyping of Superficial Epidermolytic Ichthyosis due to a Recurrent Mutation in KRT2

Superficial epidermolytic ichthyosis (SEI) is an autosomal dominant inherited ichthyosis. SEI is caused by mutations in KRT2 and frequently shows erythroderma and widespread blistering at birth. We report the clinical manifestations of two patients from a Japanese family with SEI caused by a hotspot mutation, p.Glu487Lys, in KRT2. In addition, we summarize previous reports on SEI patients with the identical mutation. One of the two patients had disease onset at the age of 7 months. The other patient’s age of onset is unknown, but it was in childhood. Neither of the two patients showed erythroderma. To perform deep phenotyping, we studied the age of onset and the frequency of erythroderma in 34 reported SEI cases with the p.Glu487Lys mutation, including the present cases. Among the cases with sufficient clinical information, 44.4% of the cases that were due to p.Glu487Lys in KRT2 occurred at birth. Erythroderma was observed in 11.1% of the cases with p.Glu487Lys in KRT2.     

Dimethyl Fumarate Induces Apoptosis via Inhibition of NF-κB and Enhances the Effect of Paclitaxel and Adriamycin in Human TNBC Cells

Triple-negative breast cancer (TNBC) has the poorest prognosis of all breast cancer subtypes. Recently, the activation of NF-κB, which is involved in the growth and survival of malignant tumors, has been demonstrated in TNBC, suggesting that NF-κB may serve as a new therapeutic target. In the present study, we examined whether dimethyl fumarate (DMF), an NF-κB inhibitor, induces apoptosis in TNBC cells and enhances the apoptosis-inducing effect of paclitaxel and adriamycin. Cell survival was analyzed by the trypan blue assay and apoptosis assay. Protein detection was examined by immunoblotting. The activation of NF-κB p65 was correlated with poor prognosis in patients with TNBC. DMF induced apoptosis in MDA-MB-231 and BT-549 cells at concentrations that were non-cytotoxic to the normal mammary cell line MCF-10A. Furthermore, DMF inhibited NF-κB nuclear translocation and Survivin, XIAP, Bcl-xL, and Bcl-2 expression in MDA-MB-231 and BT-549 cells. Moreover, DMF enhanced the apoptosis-inducing effect of paclitaxel and adriamycin in MDA-MB-231 cells. These findings suggest that DMF may be an effective therapeutic agent for the treatment of TNBC, in which NF-κB is constitutively active. DMF may also be useful as an adjuvant therapy to conventional anticancer drugs.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Seven-year temporal variation of Caesium-137 discharge inventory from the port of Fukushima Daiichi Nuclear Power Plant: continuous monthly estimation of Caesium-137 discharge in the period from April 2011 to June 2018

ABSTRACT

After direct discharges of highly contaminated water of the Fukushima Daiichi Nuclear Power Plant (1 F) from April to May 2011, Kanda suggested that relatively small amounts of run-off of radionuclides from the 1 F port into the Fukushima coastal region subsequently continued by his estimation method. However, the estimation period was limited to up to September 2012. Therefore, this paper estimatesthe discharge inventory up to June 2018. In the missing period, the Japanese government and Tokyo Electric Power Company Holdings have continued efforts to stop the discharge, and consequently, the radionuclide concentration in seawater inside the 1 F port has gradually diminished. We show the monthly discharge inventory of ¹³⁷Cs up to June 2018 by two methods, i.e., Kanda method partially improved by the authors and a more sophisticated method using Voronoi tessellation reflecting the increase in the number of monitoring points inside the 1 F port. The results show that the former always yields overestimated results compared with the latter, but the ratio of the former to the latter is less than one order of magnitude. Using these results, we evaluate the impact of the discharge inventory from the 1 F port into the coastal area and radiation dose upon fish ingestion.