The effect of initial parameters on particle size distribution inverted using the laser diffraction technique and a non-linear iterative method

The Twomey non-linear iteration (NLI) method is known by the simple algorithm. However, the performance of the inversion is strongly depended on parameters of the NLI algorithm. Major parameters in the algorithm are the initial size distribution, weight parameter, and the number of iteration. In the study, we show how values of initial parameters affect to the result of size distribution in the algorithm by the laser diffraction scattering method. Computer simulations and experimental method are carried out to observe the influence of the parameters in the algorithm. Scattering pattern is calculated by Mie scattering model in the range of 5.0 × 10^?4 ? 2.5 rad. Experimental results were measured mono-distribution polystyrene latex (50 μm) and poly-distribution glass beads (3–30 μm, and 10–100 μm). The number of iteration is a most influence parameter in the NLI algorithm. If the number of iteration is too high for calculation, calculated result will lose the smoothness. We also introduced a new parameter C (combination of the sum of residual squares of scattering signals and sum of secondary differentiation of size distribution) to monitor the suitable stop criterion for the NLI method. The parameter C is a useful index for the poly dispersion sample to find the suitable stop criterion.     

Role of interfacial potential in coagulation of cuprammonium cellulose solution

The electric potential, copper ion flux, and ammonia flux across the interface of cuprammonium cellulose solution (CCS) and various 1.0 equiv/Lelectrolyte solutions (ES) at 25°C were measured. The interfacial potentials were strongly negative (–10 to –35 mV) with H₂SO_4, HCI, and (NH₄)₂SO₄ as ES, weakly positive (6 to 8 mV) with NaCl, KCl, LiCl, CsCL, and RbCl as ES, and strongly positive (19 to 34 mV) with KOH and NaOH as ES, generally showing values similar to the diffusion potentials for electrolyte solutions comprising ions of the same absolute charge. The ammonia flux (about 1 X 10^-4 mol/cm₂/s) was relatively unaffected by the interfacial potential, but the copper ion flux was clearly dependent on it. These results, together with the observed rates of CCS coagulation, indicate that the mechanism of the coagulation was largely determined by the interfacial potential, with strongly negative potential gradients accelerating the Cu²⁺ flux into the ES and CCS coagulation proceeding rapidly by Cu²⁺ removal, strongly positive potential gradients accelerating the Na⁺ flux into the CCS and coagulation proceeding rapidly via the formation of cellulose-Na⁺ complex, and the absence of a strong potential gradient capable of accelerating the ion flux resulting in slow coagulation by ammonia removal. It may therefore be possible to control the interfacial potential and the ion flux by the ES composition, and thus to influence the structure of regenerated cellulosic fibers and membranes. © 1996 John Wiley & Sons, Inc.     

Effects of free stream turbulence on a turbulent boundary layer on a flat plate with zero pressure gradient part IV: Calculation of the flow field

The effects of free stream turbulence on a turbulent boundary layer were calculated by using a k-ϵ two-equation model. The calculations were performed with respect to velocity profiles on a flat plate, wall shear stress, turbulence energy, integral length scales of turbulence, and decay of free stream turbulence, and the results were compared with the experimental results. The energy of the free stream turbulence and the dissipation values at the leading edge of the flat plate were used as the initial calculation conditions. These initial values of dissipation were determined from the integral length scales of the free stream turbulence at the leading edge. The calculated wall shear stress increased with the free stream turbulence and integral length scales of turbulence. The velocity profiles and turbulence energy agreed well with the experimental results, and the effects of free stream turbulence on the wall shear stress agreed fairly well with those observed in experiments. © 1997 Scripta Technica. Inc. Heat Trans Jpn Res. 25 (2): 65–75, 1996     

Analysis and application of nonleaky uniplanar structures with conductor backing

Novel conductor-backed uniplanar structures, including the nonleaky CPW and slotline, are analyzed and applied to the active antenna design. Both the spectral domain analysis and finite-difference time-domain techniques are used to simulate these circuits and to justify the numerical results. The measured gain of the novel active antenna is 1.7 dB higher than the conventional CPW antenna due to the unidirectional radiation of conductor-backed circuits. © 1996 John Wiley & Sons, Inc.     

Citrus Naringenin Increases Neuron Survival in Optic Nerve Crush Injury Model by Inhibiting JNK-JUN Pathway

Traumatic nerve injury activates cell stress pathways, resulting in neuronal death and loss of vital neural functions. To date, there are no available neuroprotectants for the treatment of traumatic neural injuries. Here, we studied three important flavanones of citrus components, in vitro and in vivo, to reveal their roles in inhibiting the JNK (c-Jun N-terminal kinase)-JUN pathway and their neuroprotective effects in the optic nerve crush injury model, a kind of traumatic nerve injury in the central nervous system. Results showed that both neural injury in vivo and cell stress in vitro activated the JNK-JUN pathway and increased JUN phosphorylation. We also demonstrated that naringenin treatment completely inhibited stress-induced JUN phosphorylation in cultured cells, whereas nobiletin and hesperidin only partially inhibited JUN phosphorylation. Neuroprotection studies in optic nerve crush injury mouse models revealed that naringenin treatment increased the survival of retinal ganglion cells after traumatic optic nerve injury, while the other two components had no neuroprotective effect. The neuroprotection effect of naringenin was due to the inhibition of JUN phosphorylation in crush-injured retinal ganglion cells. Therefore, the citrus component naringenin provides neuroprotection through the inhibition of the JNK-JUN pathway by inhibiting JUN phosphorylation, indicating the potential application of citrus chemical components in the clinical therapy of traumatic optic nerve injuries.     

Infrared study of catalytic reduction of lean NOx with alcohols over alumina-supported silver catalyst

Two intense IR absorption bands due to surface isocyanate (-NCO) species have been observed at 2262 and 2232 cm^–1 when an alumina-supported silver catalyst is exposed to a mixture of NO, O₂ and ethanol at 150°C and subsequently heated to > 300°C in vacuum. The intensity of the isocyanate band is hardly affected by the water existing in the mixture. Methanol is less reactive than ethanol for the formation of isocyanate species. The reaction mechanism of catalytic reduction of lean NOx with alcohols is discussed based on these IR spectroscopic findings.     

Acceleration of the redox kinetics of VO2+/VO2 + and V3+/V2+ couples on carbon paper

The redox kinetics of VO²⁺/VO₂ ⁺ and V³⁺/V²⁺ couples on a carbon paper (CP, HCP030 N, Shanghai Hesen, Ltd., China) electrode were investigated in terms of their standard rate constant (k ₀) and reaction mechanism. The values determined for k ₀ for VO²⁺ ?? VO₂ ⁺ and V³⁺ ?? V²⁺ using the CP electrode are 1.0 × 10^?3 and 1.1 × 10^?3 cm s^?1, respectively. The value of k ₀ increases by one or two order(s) of magnitude compared with values obtained using electrodes composed of pyrolytic graphite and glassy carbon. The acceleration of the redox kinetics of vanadium ions is a result of the large surface area of the CP electrode. An inner-sphere mechanism for the reaction on the surface of the electrode is proposed. The kinetic features of vanadium redox reactions on the CP electrode reveal that CP is suitable for use as the electrodes in vanadium redox-flow batteries.     

Nonlinear Earthquake Response Characteristics of a Central Clay Core Rockfill Dam

The effect of the 2008 Iwate-Miyagi Nairiku earthquake (M_J 7.2), Japan on the Aratozawa dam, which is a 74.4 m high rockfill dam with a central clay core located in the area, was studied with a main focus on the change in the vibration period, shear wave velocity, shear modulus, and pore-water pressure. In a vertical section of the central part of the dam, three sets of 3-component accelerometers and 15 pore water pressure meters were installed. During the main shock, the acceleration exceeded 10 m/s² at the gallery, inducing large shear strains in excess of 10^-3 and a sudden build-up of the excess pore water pressure in the core. Due to the large strains, the shear wave velocity and shear modulus showed a significant decrease from their initial values and the vibration period was elongated. The decreased shear wave velocity gradually recovered toward the end of the main shock, and continued to recover with the passage of time. The full recovery of the wave velocity was found to take at least one year, while the dissipation of the excess pore water pressure proceeded more quickly than the recovery of the wave velocity.     

Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.     

Component-based robot system design for grasping tasks

The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer, sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot.