Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference     

Aldol condensation of butanal over alkali metal zeolites

Alkali metal zeolites and metal oxides were used for the aldol condensation of n-butanal to 2-ethyl-2-hexenal. The order of activity at 150 °C and 1 atm. was: CsNaY > NaY > LiNaY > MgO >Al₂O₃. Selectivity to 2-ethyl-2-hexenal was 100% for both pure and mixed isomer feed. Infrared spectroscopic studies showed that stable catalysts were produced by propene pretreatments which blocked Lewis acid sites. Adsorption of ammonia and carbon dioxide on CsNaY during aldol condensation of n-butanal causes a decrease in rate. This result, along with the order of activity, suggests that the presence of both acid and basic sites produce higher activity than strongly basic MgO.Work performed at San Jose State University.     

Poly(thienylenevinylene) prepared by ring-opening metathesis polymerization: Performance as a donor in bulk heterojunction organic photovoltaic devices

Poly(3,4-dioctylthienylenevinylene) (PDOTV) was synthesised by ring-opening metathesis polymerization (ROMP) with controlled molecular weight. PDOTV has been used to fabricate organic photovoltaic devices in combination with phenyl C₆₁-butyric acid methyl ester (PCBM) for the first time. The devices show power conversion efficiency up to 0.18%. Optimal device performance was found at a film thickness of 100 nm and a ratio of PCBM to PTV of 2:1. External quantum efficiency (EQE) measurements, transient absorption spectroscopy and morphology studies were carried out to establish factors governing photovoltaic performance. These results suggest that the efficiency values for the devices were limited by the hole mobility and unexpected phase separation within the blend. Nevertheless, the results show that ROMP is a viable, alternative, synthetic strategy for preparing PTV donors for use in bulk heterojunction OPVs.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

The leaching of chalcopyrite with cupric chloride

A comparative study of electrochemical leaching and chemical leaching of chalcopyrite was performed mainly at 343 K to elucidate the leaching mechanism of chalcopyrite with CuCl₂. Also, the morphology of the leached chalcopyrite surface was studied by using a single chalcopyrite crystal. The leaching with CuCl₂ produced a porous elemental sulfur layer on the chalcopyrite surface, showing a similar morphology to that produced during leaching with FeCl₃. The leaching kinetics were found to be linear over an extended period, followed by an acceleration stage, as a result of an increase in the reaction surface area. The leaching rate of chalcopyrite was proportional to C(CuCl₂)^0.5, whereas it was inversely proportional to C(CuCl)^0.5. The mixed potential of chalcopyrite exhibited a 66 mV decade⁻¹ dependency upon C(CuCl₂), and—69 mV decade⁻¹ upon C(CuCl). Based on these observations together with other findings, an electrochemical mechanism involving the oxidation of chalcopyrite and CuCl ₋ ² and the reduction of CuCl⁺ was proposed. The Tafel plot between the mixed potential and the current density obtained by converting the rate of chemical leaching gave a straight line whose slope was in good agreement with that of the electrochemical leaching. These findings strongly support the electrochemical mechanism of chalcopyrite leaching with cupric chloride.     

Determination of bisphenol A in canned vegetables and fruit by high performance liquid chromatography

A high performance liquid chromatograph y (HPLC) method was developed for the determination of bisphenol A (BPA) that had migrated into canned fruit and vegetables. BPA was extracted with acetonitrile from the solid portion of canned food, and with an OASIS HLB cartridge from the aqueous portion, respectively. Both extracts were cleaned up on a Florisil cartridge. The HPLC separation was carried out on a Wakosil II 3C18 RS column (4.6 × 150mm) with acetonitrile-water (40:60, v/v) as a mobile phase with a flow rate of 0.8 ml/min. BPA was detectable by UV detector at 228 nm and determined with the similarity of chromatographic peak spectrum by multiwavelength detector (similarity index was 0.99 or above). The quantification limits were 10 ng/g for the solid portion and 5 ng/ml for the aqueous portion, respectively. BPA was mainly detected in the solid portion of canned food and found at the maximum level of 11 μg per can. To verify migration into the solid portion of canned food, a partitioning experiment was carried out.     

Cold storage characteristics of mobile HTS magnet

A cold storage system specialized in mobile high-temperature superconducting (HTS) magnets (e.g. for magnetically levitated (maglev) vehicles) has been proposed. In this system, a cooling source is detachable and a HTS coil is capable of maintaining superconducting state with its heat capacity. This system allows a considerably lightweight HTS magnet.An apparatus was constructed to evaluate the possibility of using cold storage systems in maglev vehicles. The thermal characteristic of this apparatus was based on a magnet for previous maglev test vehicles [1]. The operational temperature range of the magnet was assumed from 20 K to 50 K. Some experiments indicated that heat conduction by residual gas was not negligible. Especially over 30 K, gas conduction took a large part of heat input. This phenomenon is attributable to reduction of cryopumping effect. However, activated carbon in the apparatus compensates cryopumping effect. A unique heat capacitor was also used to enhance the cold storage effect. Water ice was chosen as a heat capacitor because water ice has a higher heat capacity than metallic materials at cryogenic temperatures. A small amount of water ice also prolonged cryogenic temperature condition. These results indicate 1 day of cold storage is probable in a magnet for maglev vehicles.     

MOVPE growth and Mg doping of InxGa1−xN (x∼0.4) for solar cell

MOVPE growth and Mg doping of InGaN films are studied to develop technologies for the InGaN-based solar cell. By optimizing growth temperature and the TMI/(TMI+TEG) molar ratio, InGaN films with an In content up to 0.37 are successfully grown without phase separation and metallic In incorporation. It is found that the In composition in the InGaN films is governed by growth temperature, and the TMI/(TMI+TEG) molar ratio has very small effect on the composition change. InGaN films doped with Mg using CP₂Mg show the compensation effect of carriers and those with an In content up to 0.2 show p-type conduction. The film with an In content of 0.37 shows phase separation when the CP₂Mg/(TMI+TEG) molar ratio exceeds 0.05, indicating that Mg atoms incorporated have a significant effect on the crystal growth of InGaN.     

Computer aided-molecular design of high performance nano-carbon materials: Na on graphenes

The electronic states of sodium ion (Na⁺) trapped on the model surfaces of amorphous carbon have been investigated by means of hybrid density functional theory (DFT) calculations to elucidate the nature of interaction between Na⁺/Na and the amorphous carbon surfaces. Also, direct molecular orbital-molecular dynamics (MO-MD) calculation [Tachikawa and Shimizu, J. Phys. Chem. B, 110 (2006) 20445] was applied to diffusion processes of the Na⁺ ion on the model surface of amorphous carbon. Seven models of graphene sheets (n = 7, 14, 19, 29, 37, 44 and 52, where n means numbers of rings in each carbon cluster) were considered in the present study. The B3LYP/LANL2MB calculations showed that the sodium ion is located at 2.24-2.26 Å from the graphene surfaces. The direct MO-MD calculations showed that the Na⁺ ion diffuses freely on the surface above 300 K. At higher temperature (1100 K), the Na⁺ ion moved from the center to edge region of the model surface. The nature of the interaction between Na⁺ and the amorphous carbon surfaces was discussed on the basis of theoretical results.