A 250-Mb/s/pin, 1-Gb double-data-rate SDRAM with a bidirectionaldelay and an interbank shared redundancy scheme

This paper describes three circuit technologies indispensable for high-bandwidth multibank DRAM's. (1) A clock generator based on a bidirectional delay (BDD) eliminates the output skew. The BDD measures the cycle time as the quantity charged or discharged of an analog quantity, and replicates it in the next cycle. This achieves a 0.18-mm ², two-cycle-lock clock generator operating from 25 to 167 MHz with a 30-ps resolution. (2) A quad-coupled receiver eliminates the internal skew caused by the difference between a rise input and a fall input by 40%. (3) An interbank shared redundancy scheme (ISR) with a variable unit redundancy (VUR) efficiently increases yield in multibank DRAM's. The ISR allows redundancy match circuits to be shared with two or more banks. The VUR allows the number of units replaced to be variable. These circuit technologies achieved a 250-Mb/s/pin, 8-bank, 1-Gb double-data-rate synchronous DRAM     

Development of fabrication process for Ag/polydiacetylene (core/shell) hybridized nanocrystals

Core/shell hybridized nanocrystals composed of Ag nanoparticle core and polydiacetylene shell were fabricated successfully by means of “co-reprecipitation/microwave irradiation method”. The hybridized nanocrystals were characterized using transmission electron microscopy (TEM) observation and UV–vis absorption spectroscopy. UV–vis spectral measurements revealed that polydiacetylene shell was the red phase while π-conjugated backbone is distorted. Detailed mechanism of formation of the red phase was discussed.     

Oxidative Stress and Its Significant Roles in Neurodegenerative Diseases and Cancer

Reactive oxygen and nitrogen species have been implicated in diverse pathophysiological conditions, including inflammation, neurodegenerative diseases and cancer. Accumulating evidence indicates that oxidative damage to biomolecules including lipids, proteins and DNA, contributes to these diseases. Previous studies suggest roles of lipid peroxidation and oxysterols in the development of neurodegenerative diseases and inflammation-related cancer. Our recent studies identifying and characterizing carbonylated proteins reveal oxidative damage to heat shock proteins in neurodegenerative disease models and inflammation-related cancer, suggesting dysfunction in their antioxidative properties. In neurodegenerative diseases, DNA damage may not only play a role in the induction of apoptosis, but also may inhibit cellular division via telomere shortening. Immunohistochemical analyses showed co-localization of oxidative/nitrative DNA lesions and stemness markers in the cells of inflammation-related cancers. Here, we review oxidative stress and its significant roles in neurodegenerative diseases and cancer.     

Technical note Development of a new technique for geological investigation using DTM data: An example in western Turkey

The topographic features formed by factors such as altitude, tectonic movement, lithology and others were analysed quantitatively by a new technique in this study on rift valleys in western Turkey. This technique calls for the determination of the altitude and vertical geologic movements in long-wavelength components after the separation of the short- and long-wavelength components of the two-dimensional Fast Fourier Transform (FFT) based on a digital terrain model (DTM). The location of active faults can be inferred from the magnitude of the anomalies of altitudinal dispersion and the position of the anomalies, and it is also inferred that the values of the anomalies are related to the displacement of the faults. The results have been checked in the field and it was shown that this technique is very effective for structural analysis.     

Species specificity of musty odor producing Phormidium tenue in Lake Kamafusa.

16S ribosomal DNA sequences of various strains of Phormidium tenue (P. tenue) in Lake Kamafusa were determined. Such P. tenue could not be distinguished under microscopic examination. From the results of the analyses of base sequences, and using a phylogenetic tree, several P. tenue with different species specificity on the sequence were found in the lake. P. tenue were divided into three groups. The first produced 2-methylisoborneol (MIB) and was close to a species from the moat of Nagoya castle. The second produced MIB and was characteristic of Lake Kamafusa. The third had a brown color like a Lake Biwa strain and was MIB non-producing. From the phylogenetic tree, it was revealed that species had not changed recently by mutation. Moreover, a detection method for P. tenue by PCR and dot hybridization was established.     

Development of systems reliability analysis code SECOM-2 for seismic PSA

An integrated code system SECOM-2, developed at the Japan Atomic Energy Research Institute (JAERI), has the following functions for systems reliability analysis in seismic probabilistic safety assessments (PSAs): (1) calculation of component failure probability, (2) extraction of minimal cut sets (MCSs) from a given fault tree (FT), (3) calculation of frequencies of accident sequences and core damage, (4) importance analysis with several measures with consideration of unique parameters of seismic PSAs, (5) sensitivity analysis, and (6) uncertainty analysis. This paper summarizes the special features of SECOM-2 to perform the analyses mentioned above. At JAERI, using an integrated FT which represents seismically induced core damage due to all initiating events as a system model to calculate core damage frequency of a nuclear power plant, SECOM-2 can calculate conditional point estimate probabilities of system failures, losses of safety functions, and core damage as a function of earthquake motions. The point estimate is computed by a method which gives an exact numerical solution using the Boolean arithmetic model method. As for consideration of correlation of component failure, which has been an important issue in seismic PSAs, a new technique based on direct FT quantification by a Monte Carlo simulation is being added to SECOM-2. Adding this technique, the core damage frequency can be calculated not only with the upper bound approximation based on MCSs but also with a near exact solution taking into account the correlation among all components. This paper also presents the preliminary results of a seismic PSA of a generic BWR plant in Japan performed at JAERI to demonstrate the functions of the SECOM-2 code.     

Gain-flattened tellurite-based EDFA with a flat amplificationbandwidth of 76 nm

We describe a tellurite-based Er³⁺-doped fiber amplifier (EDFA) with a flat amplification bandwidth of 76 nm and a noise figure of less than 7 dB. Furthermore, a parallel-type amplifier composed of this EDFA and a 1.45-μm-band Tm³⁺-doped fluoride fiber amplifier achieved a flat amplification bandwidth of 113 nm     

Reduction of depth variation in an Si etching process by applying an optimized run-to-run control system

A reduction of depth variation in a shallow trench isolation process is desired for obtaining more stable electrical performances of silicon devices. By applying an optimized run-to-run control system to a silicon trench etching process, trench depth variation of the process was reduced. Cp/Cpk of the trench depth of product wafers were improved from 1.10/0.83 to 1.39/1.34 by the control.     

Rapid Reconstitution of Biosynthetic Machinery for Fungal Metabolites in Aspergillus oryzae: Total Biosynthesis of Aflatrem

Reconstitution of the biosynthetic machinery for fungal secondary metabolites in Aspergillus oryzae provides an opportunity both for stepwise determination of the biosynthetic pathways and the total biosynthesis of fungal natural products. However, to maximize the utility of the reconstitution system, a simple and rapid strategy for the introduction of heterologous genes into A. oryzae is required. In this study, we demonstrated an effective method for introducing multiple genes involved in the biosynthesis of fungal metabolites by using the expression vectors pUARA2 and pUSA2, each of which contains two cloning sites. The successful introduction of all the aflatrem biosynthetic genes (seven genes in total) after two rounds of transformation enabled the total biosynthesis of aflatrem. This rapid reconstitution strategy will facilitate the functional analysis of the biosynthetic machinery of fungal metabolites.