Demonstration of 100 Gbps optical packet switching using header processor based on 48-bit longest prefix matching

Wire-rate packet processing and its energy saving for over 100 Gbps speed of line are major issues to be resolved in optical packet switching (OPS) networks. For that purpose, we newly develop a high-speed, deterministic-latency electronic header processor based on longest prefix matching (LPM) for searching optical packet destination addresses (OP-DAs). This paper reports the successful experimental results of electronic header processing based on LPM search of up to 48 bits and optical switching of 100 Gbps optical packets by the use of the header processor. We demonstrate 48-bit LPM-capable optical packet switching. We also demonstrate IP packet transfer and 32-bit LPM-capable optical packet switching. In the latter demonstration, the 32-bit OP-DA of optical packets is directly copied from the 32-bit destination address of Internet Protocol version 4 (IPv4) packets. This result indicates that OPS networks can be deployed with electronic IP networks by the use of integrated network operation between OPS and IP networks.     

Video based estimation of pedestrian walking direction for pedestrian protection system

Pedestrian protection has played an important role for driver assistance systems. Our aim is to develop a video based driver assistance system for the detection of the potentially dangerous situation between the vehicle and pedestrian, in order to warn the driver. In this paper, we address the problem of detecting pedestrian in real-world scenes and estimation of the walking direction with a single camera from a moving vehicle. Considering all the available cues for predicting the possibility of collision is very important. The direction in which the pedestrian is facing is one of the most important cues predicting where the pedestrian may move in the future. So we first address the problem of single-frame pedestrian orientation estimation in real-world scenes. Then again, we estimate the pedestrian walking direction using multi-frame based on the result of single-frame orientation estimation. We propose a three-step method: pedestrian detection for single-frame step, orientation estimation for single-frame step and walking direction estimation for multi-frame step. To evaluate the proposed method in its robustness and accuracy, the experiments have been performed between numbers of images which is highly challenging uncontrolled conditions in real world. It shows a significant performance improvement in octant orientation estimation of about 64% accuracy in the orientation estimation step and achieved surprisingly good accuracy in estimating the walking direction against 212 targeted objects.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

High-Speed TDM–WDM Techniques for Long-Haul Submarine Optical Amplifier Systems

Optical amplifier techniques have led to the installation of large-capacity submarine systems and further capacity increases seem likely. This paper reviews the FSA submarine system, which flexibly operates at both 2.5 and 10 Gb/s and offers maximum transmission capacity of 60 Gb/s for commercial use. The system configuration as well as its characteristics and upgradability will be introduced, including measurement results on time-division-multiplexing/wavelength-division-multiplexing (TDM–WDM) transmission at bit rates of 10 and 20 Gb/s using non-return-to-zero or soliton pulses. To further increase transmission capacity, TDM–WDM techniques that permit more than 10 Gb/s signal transmission in each data channel should be developed. Thus, pulse formats, which include non-return-to-zero, return-to-zero, or soliton pulses, and dispersion allocation in transmission fibers are significant issues. We introduce and discuss our recent results from high-speed (10 to 40 Gb/s) TDM–WDM signal transmission experiments with regard to the above aspects.     

Evidence of Oxygen Ferromagnetism in ZnO Based Materials

Discoveries of room‐temperature ferromagnetism (RTFM) in semiconductors hold great promise in future spintronics technologies. Unfortunately, this ferromagnetism remains poorly understood and the debate concerning the nature, carrier‐mediated versus defect‐mediated, of this ferromagnetism in semiconducting oxides is still open. Here, by using X‐ray absorption (XAS) and X‐ray magnetic circular dichroism (XMCD), it is demonstrated that the oxygen ions have a ferromagnetic response in different ZnO‐based compounds showing RTFM behavior: ZnO nanoparticles capped with organic molecules and ZnO/ZnS heterostructures. These results demonstrate the intrinsic occurrence of RTFM in these systems, and point out that it is not related to the metallic cation but it relays on the conduction band of the semiconductor.     

Photovoltaic characteristics of phosphorus-doped amorphous carbon films grown by r.f. plasma-enhanced CVD

The phosphorus-doped amorphous carbon (n-C:P) films were grown by r.f. power-assisted plasma-enhanced chemical vapor deposition at room temperature using solid phosphorus target. The influence of phosphorus doping on material properties of n-C:P based on the results of simultaneous characterization are reported. Moreover, the solar cell properties such as series resistance, short circuit current density (J_sc), open circuit current voltage (V_oc), fill factor (FF) and conversion efficiency (η) along with the spectral response are reported for the fabricated carbon based n-C:P/p-Si heterojunction solar cell were measured by standard measurement technique. The cells performances have been given in the dark I–V rectifying curve and I–V working curve under illumination when exposed to AM 1.5 illumination condition (100 mW/cm², 25 °C). The maximum of V_oc and J_sc for the cells are observed to be approximately 236 V and 7.34 mA/cm², respectively for the n-C:P/p-Si cell grown at lower r.f. power of 100 W. The highest η and FF were found to be approximately 0.84% and 49%, respectively. We have observed the rectifying nature of the heterojunction structures is due to the nature of n-C:P films.     

TARGET YIELDS AND HYDROGEN CONSUMPTION IN BROWN COAL LIQUEFACTION

A simple mechanistic model for brown coal liquefaction has been developed and used in conjunction with data from PDU operation to examine the factors which contribute to hydrogen consumption. It is found that after allowing for hydrogen generation requirements, the maximum achievable refined product yield from Morwell brown coal ((ssuming a naphtha/middle distillate ratio of 5:6 together with refined product H/C ratios of 1.8 for naphtha and 1.5 for middle distillate) is 46 - 48%, corresponding to a hydrogen consumption of 6.6 - 7.6%. Alternatively, if consideration of hydrogen generation is excluded (as in pilot plant operation), the maximum yield would be around 54%, corresponding to 6.6% net hydrogen consumption. These results suggest that an aim of maximizing product yield by decreasing Cl-C4 gas formation may not be as desirable as at first thought.     

Deep-sea water supplementation and swimming exercise improves bone metabolism in growing rats fed a high-fat diet

This study was examined the effects of deepsea water (DSW) supplementation and swimming exercise on bone metabolism in growing male rats. Thirty-two Sprague-Dawley male rats, 6 weeks of age, were randomly divided into high-fat diet sedentary (HS, n=8) or exercised group (HE, n=8) and DSW supplemented sedentary (DS, n=8) or exercised group (DE, n=8), given a high fat diet to all groups for 8 weeks. In the results, serum osteocalcin level of the DS was significantly lower than that of the HS (p<0.01). In addition, femoral bone mineral density (BMD), tibial bone mineral content (BMC), and breaking force of the DS were significantly higher than that of the HS (p<0.05). Furthermore, femoral BMD and tibial weight of DE were significantly higher than that of the HE (p<0.05). These results suggest that drinking deep-sea water and exercise has a crucial role for prevent osteoporosis and increase peak bone mass in growing male rats.