Stereoisomeric identification of norephedrine derived from methamphetamine or amphetamine: urinalysis results of 33 methamphetamine abusers and 1 amphetamine abuser in Japan

Stereoisomeric identification of norephedrine (NE) derived from methamphetamine (MA) or amphetamine (AM) was investigated by SIM-GC/MS assay using the urine of 33 MA abusers and 1 AM abuser. The assay simultaneously identified TFA-derivatized MA and AM metabolites, including AM, p-hydroxyl-MA (p-HMA), and p-hydroxyl-AM (p-HAM). The analysis lasted approximately 43 min, with a signal-to-noise ratio of >or=3 and a detection limit of 50 ng/mL. Among 12 urine samples from different subjects, only the S (+) form of MA and its metabolites (AM, p-HMA, p-HAM) was detected, however, a (1R,2S)-(-)-NE stereoisomer was also identified. Among the urine samples of two subjects, only the R (-) form of MA and its metabolites (AM, p-HMA, p-HAM) was detected, while NE was not detected. Following urinalysis of urine obtained from 19 MA abusers and 1 AM abuser, only the (1R,2S)-(-)-NE stereoisomer was identified, while unmetabolized MA, AM, and their metabolites (p-HMA, p-HAM), showed stereoselective metabolism. Although (1R,2S)-(-)-ephedrine (EP) alone was found in the urine of 1 (S)-(+)-MA user and 1 (S)-(+)- and (R)-(-)-MA user among 33 MA users, it was not present in the urine of the remaining 31 subjects. Therefore, (1R,2S)-(-)-NE was likely not of (1R,2S)-(-)-EP origin and was most likely from (S)-(+)-AM of the MA metabolite. The production ratio of (1R,2S)-(-)-NE to (S)-(+)-AM ranged from 0.01 to 0.25 in MA abusers and was 0.12 in AM abusers.     

Tangent height registration method for the Version 1.4 data retrieval algorithm of the solar occultation sensor ILAS-II

The Improved Limb Atmospheric Spectrometer-II (ILAS-II) is a satellite-borne solar occultation sensor onboard the Advanced Earth Observing Satellite-II (ADEOS-II). The ILAS-II succeeded the ILAS. The ILAS-II used four grating spectrometers to observe vertical profiles of gas volume mixing ratios of trace constituents and was also equipped with a Sun-edge sensor to determine tangent heights geometrically with high precision. The accuracy of gas volume mixing ratios depends on the accuracy of the tangent height determination. The combination method is a tangent height registration method that was developed to give appropriate tangent heights for the ILAS-II Version 1.4 data retrieval algorithm. This study describes the method used in the ILAS-II Version 1.4 retrieval algorithm to register tangent heights. The root-sum-square total random error is estimated to be 30 m, and the total systematic error is 180 m at an altitude of 30 km. The influence of the tangent height errors on the vertical profiles of gas volume mixing ratios in ILAS-II Version 1.4 is estimated by using the relative difference. The relative difference for each species is within 7% (20%) for an altitude shift of +/-100 m(+/-300 m).     

Drying process in a solvent-based paint analyzed by phase-shifting digital holography and an estimation of time for tack free

A technique to study the drying of paints, based on phase-shifting digital holography, is presented. The technique is applied to the drying process of solvent-based paint on a three-dimensional surface at different substrate temperatures. For processing the data, a cross-correlation function and phase change derived from reconstructed complex amplitudes are calculated to visualize and to evaluate the local variations in the dryness of paint. The relationship between the optical signal obtained by the holographic method and the actual microscopic variations occurring in the paint film is also investigated using the gravimetric technique and a microscope. It is shown that the holographic technique can determine the stationary state of a painted surface corresponding to the end of the falling rate period in the drying process. The holographic technique detects mainly the activity on the surface and is applicable to assessment of the early drying process of paint.     

Numerical simulation of MFM image of a magnetic nano-contact

A MFM image of a magnetic nano-contact is studied numerically. We show that the ring- or arc-shaped MFM images with diameter of the order of 100 nm appear while the size of a nano-contact is of the order of 1 nm. We also show that the origin of the ring or arc-shaped MFM image is the oscillation of the magnetization of a nano-contact induced by the interaction between the MFM-tip and the nano-contact.     

Effect of grafted polymer species on particle monolayer structure at the air-water interface

We have studied poly(methyl methacrylate)-grafted(PMMA) particle monolayer systems at the air-water interface. In previous papers, we reported that PMMA chains grafted from particles (silica particle and polystyrene latex) were extended on water surfaces. Through observing deposited particle monolayers on substrates using SEM, we have confirmed that PMMA of large molecular weights were either dispersed or arrayed in structure with long inter-particle distances approximately 500 nm. In contrast, low molecular weight PMMA were observed to aggregate upon deposition. We speculated that the difference in morphology in deposited particle monolayers would be attributed to the affinity between the grafted polymer and the substrate. To examine the effect of this affinity three new polymer-grafted silica particles were synthesized with a fairly high graft density of about 0.14 approximately 0.43 nm(-2). As well as PMMA-grafted silica particles (SiO2-PMMA), poly(2-hydroxyethyl methacrylate) and poly(t-butyl methacrylate)--grafted silica particles (SiO2-PHEMA and SiO2-PtBuMA) were also prepared and subjected to pi-A isotherm measurements and SEM observations. These pi-A isotherms indicated that polymer-grafted silica formed monolayer at the air-water interface, and the onset area of increasing surface pressure suggests that the polymer chains are extended on a water surface. However, the morphology of the deposited monolayer is highly dependent on polymer species: SiO2-PHEMA showed that the dispersed particle monolayer structure was independent of grafted molecular weight while SiO2-tBuMA showed an aggregated structure that was also independent of grafted moleculer weight. SiO2-PMMA showed intermediate tendencies: dispersed structure was observed with high grafted molecular weight and aggregated structure was observed with low grafted molecule weight. The morphology on glass substrate would be explaiened by hydrophilic interaction between grafted polymer and hydrophilic glass substrate.     

Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard‐Carbon Electrodes and Application to Na‐Ion Batteries

Recently, lithium‐ion batteries have been attracting more interest for use in automotive applications. Lithium resources are confirmed to be unevenly distributed in South America, and the cost of the lithium raw materials has roughly doubled from the first practical application in 1991 to the present and is increasing due to global demand for lithium‐ion accumulators. Since the electrochemical equivalent and standard potential of sodium are the most advantageous after lithium, sodium based energy storage is of great interest to realize lithium‐free high energy and high voltage batteries. However, to the best of our knowledge, there have been no successful reports on electrochemical sodium insertion materials for battery applications; the major challenge is the negative electrode and its passivation. In this study, we achieve high capacity and excellent reversibility sodium‐insertion performance of hard‐carbon and layered NaNi_0.5Mn_0.5O₂ electrodes in propylene carbonate electrolyte solutions. The structural change and passivation for hard‐carbon are investigated to study the reversible sodium insertion. The 3‐volt secondary Na‐ion battery possessing environmental and cost friendliness, Na⁺‐shuttlecock hard‐carbon/NaNi_0.5Mn_0.5O₂ cell, demonstrates steady cycling performance as next generation secondary batteries and an alternative to Li‐ion batteries.     

Silica and titanium dioxide nanoparticles cause pregnancy complications in mice

The increasing use of nanomaterials has raised concerns about their potential risks to human health. Recent studies have shown that nanoparticles can cross the placenta barrier in pregnant mice and cause neurotoxicity in their offspring, but a more detailed understanding of the effects of nanoparticles on pregnant animals remains elusive. Here, we show that silica and titanium dioxide nanoparticles with diameters of 70 nm and 35 nm, respectively, can cause pregnancy complications when injected intravenously into pregnant mice. The silica and titanium dioxide nanoparticles were found in the placenta, fetal liver and fetal brain. Mice treated with these nanoparticles had smaller uteri and smaller fetuses than untreated controls. Fullerene molecules and larger (300 and 1,000 nm) silica particles did not induce these complications. These detrimental effects are linked to structural and functional abnormalities in the placenta on the maternal side, and are abolished when the surfaces of the silica nanoparticles are modified with carboxyl and amine groups.     

Stripe-Induced High-Temperature Superconductivity in Cuprates

The single-particle spectral function of the strongly correlated electron system is composed of a coherent peak and incoherent hills on both sides. The non-resonant electronic scattering of the incoherent spectral function becomes the same in the $B_{\rm 1g}$ and $B_{\rm 2g}$ channels and also correlates to the optical conductivity. The mid-infrared hill in the optical conductivity has the same origin as the electronic Raman susceptibility induced by the hole hopping perpendicular to the stripe. The wide-energy Raman spectra in the hole-doped and electron-doped cuprates are different, because the hole-doped cuprates are in the stripe phase while the electron-doped ones are not.     

Inter-laboratory evaluation studies for establishment of notified ELISA methods for allergic substances (peanuts)

Inter-laboratory evaluation studies were conducted for ELISA methods for allergic substances (peanuts). Extracts of biscuit, sauce, chocolate and butter spiked with peanut standard protein at a level of 5-20 ng/mL as sample solutions were analyzed in replicate in 10 laboratories. Coefficients of variation (CVs) of the ELISA methods using a Peanut Protein ELISA Kit (Peanut kit) and a FASTKIT Peanut ELISA kit (Peanut ELISA kit) were mostly below 10%. Mean recoveries of the peanut standard protein from the food extracts were over 40% in the two ELISA methods. Repeatability relative standard deviations of peanut standard protein in four food extracts were in the ranges of 15.2-49.7% and 3.0-28.3% for the Peanut kit and the Peanut ELISA kit, respectively. Reproducibility relative standard deviations of peanut standard protein in four food extracts were 23.5-44.4%, 9.6-28.4% for the Peanut kit and the Peanut ELISA kit, respectively. The detection limits of both ELISA methods were 2-2.5 ng/mL in sample solutions. These results suggested that the notified ELISA methods are reliable and reproducible for the inspection of peanut protein levels in extracts of biscuit, sauce, chocolate and butter.