Uptake and utilization of ectoine by halotolerant Brevibacterium sp. JCM 6894 subjected to osmotic downshock

The concentration changes of the cyclic amino acid ectoine (1,4,5,6-tetrahydro-2-methyl-4-pyridine carboxylic acid) in Brevibacterium sp. JCM 6894 cells subjected to an osmotic downshock were investigated. When the cells grown in the presence of 2 M NaCl were suspended in deionized water, they immediately released about 60% of the ectoine synthesized intracellularly. During the subsequent incubation, we observed that both the extra- and intracellular concentrations of ectoine were reduced almost linearly with the incubation time. When ectoine was provided externally to the downshocked cells, a similar reduction in both intra- and extracellular ectoine concentrations was recognized. In addition, we observed an increase in ectoine accumulation at about 10 h of incubation, which indicates that ectoine was taken up by such downshocked cells in the absence of external Na+. Furthermore, the downshocked cells showed higher levels of survival, respiration, and growth in the presence of ectoine than in its absence. The ability to take ectoine up was induced in the cells grown in the presence of >0.25 M NaCl for >12 h. Thus, we conclude that even under the lower osmotic condition ectoine might be taken up and subsequently utilized by strain JCM 6894 subjected to the osmotic downshock, indicating that the uptake of ectoine by such cells occurred for the survival and growth of the cell itself rather than for cellular osmoregulation.     

Field instrument for simultaneous large dynamic range measurement of atmospheric hydrogen sulfide, methanethiol, and sulfur dioxide

We describe a membrane-based collection/analysis system that differentially monitors H2S and CH3SH, and to which a conductometric SO2 analyzer using the same collector was coupled. A diffusion scrubber (DS) comprised of a Nafion tube collects H2S selectively while a porous polytetrafluoroethylene (pPTFE) DS collects both H2S and CH3SH. Both gases are measured via their ability to react with fluorescein mercuric acetate (FMA) which results in decreased fluorescence. The limited dynamic range of a negative signal procedure was overcome by using dual DS units comprised of short and long scrubbers, placed serially in the liquid flow line. Different DS designs and membrane materials were investigated. H2S, CH3SH, and SO2 from a biogenic point source were continuously measured, and the H2S/CH3SH data compared well with a standard procedure involving Tedlar bag collection, preconcentration and thermal desorption from a Tenax trap, and measurement by gas chromatography/flame photometric detection. Walkaround portability of the instrument and very large dynamic range measurement of H2S and SO2 were demonstrated around the Mt. Aso volcano.     

Hydrothermal Synthesis of Oriented Anatase Films Consisting of Columnar Aggregates and Their Wetting Properties

We hydrothermally synthesized anatase films on Ti substrates from transparent aqueous solutions of layered titanate colloids. The morphology and wetting properties of the films were examined. The films consisted of columnar aggregates grown on the Ti substrates, which resulted in high orientation. Randomly oriented films were obtained when alumina was used as a substrate, whereas the sol–gel precoating of a titanium oxide (TiO₂) layer on alumina substrates resulted in similar orientation as that of the films on Ti substrates. Thus, the presence of TiO₂ on the substrate surface plays an important role in the orientation of columnar aggregates. The columnar aggregates were similar in microstructure to the arms of a type of six-pointed star-like anatase aggregate synthesized hydrothermally from the same reaction solutions. They were composed of twins of tapered anatase nanocrystals, which provided a rough film surface. The film surface was highly hydrophilic and oleophilic due to the nanoscale roughness even when the film was not irradiated with UV light.     

Classification of particles by centrifugal separator and analysis of the fluid behavior

This study gives fundamental knowledge on the particle classification performance by centrifugal separator.It is found that the cut size of a centrifugal separator decreases as the rotational speed increases and the liquid flow rate decreases. Fitting our experimental results with the theory, they agree with each other at high flow rate. However, the difference between them generates at low flow rate. This is because dead spaces are generated in the centrifugal separator at the low flow rate. Also, the computer simulation of the fluid behavior in the centrifugal separator can find the decrease of the velocity near the wall under the low flow rate, which suggests the possibility of the formation of dead spaces in the separator.     

Competitive adsorption of fibronectin and albumin on hydroxyapatite nanocrystals

Competitive adsorption of two-component solutions containing fibronectin (Fn) and albumin (Ab) on hydroxyapatite (HAp) nanocrystals was analyzed in situ using the quartz crystal microbalance with dissipation (QCM-D) technique. Adsorption of the one-component protein (Fn or Ab) and the two-component proteins adjusted to different molar ratios of Fn to Ab at a fixed Fn concentration was investigated. The frequency shift (Δf; Hz) and the dissipation energy shift (ΔD) were measured with the QCM-D technique, and the viscoelastic changes of adlayers were evaluated by the saturated ΔD/Δf value and the Voigt-based viscoelastic model. For the adsorption of the one-component protein, the Fn adlayer showed a larger mass and higher viscoelasticity than the Ab adlayer, indicating the higher affinity of Fn on HAp. For the adsorption of the two-component proteins, the viscoelastic properties of the adlayers became elastic with increase in Ab concentration, whereas the adsorption mass was similar to that of Fn in the one-component solution regardless of the Ab concentration. The specific binding mass of the Ab antibody to the adlayers increased with increase in Ab concentration, whereas that of the Fn antibody decreased. Therefore, Fn preferentially adsorbs on HAp and Ab subsequently interacts with the adlayers, indicating that the interfacial viscoelasticity of the adlayers was dominated by the interaction between Fn and Ab.     

Position command shaping for vibration suppression considering target position correction

This paper presents a command shaping technique based on a minimum jerk control approach that takes into consideration target position correction during motion, for the fast and precise positioning in vibratory mechatronic systems. The positioning controller is designed using a two‐degree‐of‐freedom control: a feedback compensator is synthesized by H_∞ control design to ensure the robust stability, while a feedforward compensator suppresses the vibration in response based on a coprime factorization expression of the plant mechanism. The command shaping, on the other hand, eliminates the corresponding vibration components of the primary and secondary models in the position command, where the continuity of jerk component in the command can be ensured against the target position correction. The effectiveness of the proposed shaping technique has been verified by experiments using a table drive system on a machine stand. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 168(3): 38–47, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20838     

Polymerization of β-lactoglobulin and bovine serum albumin at oil-water interfaces in emulsions by transglutaminase

Polymerization of β-lactoglobulin and bovine serum albumin at the oil—water interfaces in n-tetradecane-in-water emulsions induced by the transglutaminase reaction was studied. The emulsions were incubated with transglutaminase for various times, and adsorbed and unadsorbed protein fractions at the oil—water interfaces were analyzed by sodium dodecyl sulfate—polyacrylamide gel electrophoresis. While only monomers were detected in the unadsorbed fractions, polymers were observed in the adsorbed fractions of the both proteins. The sizes and amounts of the polymers increased with incubation time. The incubation with transglutaminase caused much flocculation of the emulsion stabilized by β-lactoglobulin. An increase in viscosity was also observed with the flocculation. The flocculation was probably initiated by the formation of ε-(γ-glutamyl)-lysyl isopeptide bonds between β-lactoglobulin molecules adsorbed on different oil droplets. In the case of the emulsion stabilized by bovine serum albumin, however, the flocculation and the increase in viscosity occurred to only limited extents by the transglutaminase reaction. This suggests that ε-(γ-glutamyl)-lysyl isopeptide bonds induced by the transglutaminase reaction were formed only between neighboring molecules of bovine serum albumin on the same droplet.     

6-in diameter InP single crystals grown by the hot-wall LEC method and the mirror wafers

6-in diameter Fe-doped semi-insulating InP single crystals have been grown by the hot-wall liquid encapsulated Czochralski method. This method has a quartz inner vessel to stabilize the thermal convection. Temperature gradient and solid-liquid interface shape can be controlled by a multizone heater system. The weight of grown crystal was 18 kg and the full length was 250 mm. The dislocation density was about 1/spl times/10/sup 5/ cm/sup -2/. The resistivity was more than 1/spl times/10/sup 7/ /spl Omega/cm and its uniformity was the same as the smaller diameter crystal. The conditions of wafer processing were optimized to improve the wafer flatness. The rolloff and the slope of the wafer surface could be reduced especially by the improvement of the polishing conditions. The typical total thickness variation was 3.3 /spl mu/m, and it was comparable to the GaAs wafer.     

Practical implementation and packaging technologies for alarge-scale ATM switching system

The practical implementation of a trial large-scale asynchronous transfer mode (ATM) switching system and its packaging technologies are described. The architecture of the ATM switching system is discussed with an emphasis on system scalability. A building block architecture in which switching capacity can be expanded in a modular fashion is introduced. The design of the ATM switching system, including the ATM switch element, is described. The implementation of the VLSIs for the ATM switch which realize a highly modular system is explained. Bit-slice techniques are effectively used to realize a high-speed switch element as a CMOS VLSI chipset. An edge-to-edge orthogonal packaging technique is also presented     

a-SiC:H/SiO2 Laminated Polarization Splitter for the Wavelength Region Longer Than 1.3 μm Prepared by Plasma-Enhanced Chemical Vapor Deposition

A laminated polarization splitter for the wavelength region longer than 1.3 μm is fabricated for the first time. It is composed of a-SiC:H/SiO₂ alternative multilayers prepared by plasma-enhanced chemical vapor deposition. Splitting behavior is also verified experimentally. It has low absorption loss even for the wavelength region around λ = 1.3 μm because the band-gap energy of a-Sic is larger than that of a-Si. The measured splitting angle is 13.8°, which is 2.4 times larger than the 5.7° splitting angle of rutile. The absorption loss of the multilayer is reduced to 1 × 10^-3 dB/μm at λ = 1.3 μm. The magnitude of the residual stress is 9.45 × 10⁸ dyn/cm², which is about one-third of that prepared by the rf bias sputtering equipment which is used for another project of our group. The deposition rate of SiO₂, is increased to 135 nm/min, which is 27 times larger than that prepared by the sputtering equipment.