Removal of polonium from stainless steel surface contaminated by neutron irradiated lead-bismuth eutectic

Lead-bismuth eutectic (LBE) has good characteristics for the coolant and/or target of various nuclear systems, but it also has a problem of polonium contamination. In the study, baking experiment was performed to remove polonium contamination on type 316 stainless steel plate that was originated from neutron irradiated LBE. The contaminated type 316 stainless steel plate was baked in a vacuum condition at various temperatures from 200°C to 600°C. In the previous preliminary study, the effect of short time baking was investigated. In the study, the effect of long time baking was investigated. The detail of the experimental method was also described. The result of long time baking experiment showed that the baking method was effective for removal of polonium from stainless steel surface contaminated by neutron irradiated LBE, if the baking was performed at 500°C and higher in a vacuum condition. The obtained result was consistent to the previous preliminary study.     

Secondary neutral and ionized particle measurements under MeV-energy ion bombardment

We have measured both secondary neutral and ionized particles from an InSb target under 3.0 MeV Si ion bombardment. Measurements of both ions and neutrals have not been carried out so far in the MeV-energy range. The mass spectra and axial emission energy distributions of secondary particles were investigated. Secondary ions were measured with a linear- and a reflective-type time-of-flight technique, whereas secondary neutral particles were photo-ionized by a UV pulsed laser (ArF: 193 nm) and measured with a reflective-type time-of-flight technique. Different results were obtained for neutral particles in comparison with ionized particles. The mean energy of neutral Sb atoms was much lower than that of neutral In atoms, whereas the mean energies of secondary In and Sb ions were nearly equal.     

Experimental study of the flow in helical circular pipes: Torsion effect on the flow velocity and turbulence

An objective of the present paper is to experimentally clarify the torsion effect on the flow in helical circular pipes. We have made six helical circular pipes having different pitches and common non-dimensional curvature δ of about 0.1. The torsion parameter β0, which is defined by β0 = τ/（2δ）1/2 with non-dimensional torsion r, are taken to be 0.02, 0.45, 0.69, 1.01, 1.38 and 1.89 covering from small to very large pitch. The velocity distributions and the turbulence of the flow are measured using an X-type hot-wire anemometer in the range of the Reynolds number from 200 to 20000. The results obtained are summarized as follows： The mean secondary flow pattern in a cross section of the pipe changes from an ordinary twin-vortex type as is seen in a curved pipe without torsion （toroidal pipe） to a single vortex type after one of the twin-vortex gradually disappears as β0 increases. The circulation direction of the single vortex is the same as the direction of torsion of the pipe. The mean velocity distribution of the axial flow is similar to that of the toroidal pipe at small β0, but changes its shape as β0 increases, and attains the shape similar to that in a straight circular pipe when ,β0 = 1.89. It is also found that the critical Reynolds number, at which the flow shows a marginal behavior to turbulence, decreases as ,β0 increases for small ,β0, and then increases after taking a minimum at ,β0 ≈ 1.4 as ,β0 increases. The minimum of the critical Reynolds number experimentally obtained is about 400 at ,β0 ≈ 1.4.     

Assessment of human–machine interface design for a Chinese nuclear power plant

A nuclear power plant (NPP) is a complex system but requires high reliability. The human–machine interface (HMI) design plays very important role in reactor safety. This paper describes an assessment on HMI design of a Chinese NPP, using a software system named Dynamic Interaction Analysis Support (DIAS). DIAS can give not only quantitative indices for dynamically assessing the HMI design, but also allow modify the values of these indices by taking into account human error probability during specified emergent operation procedures. The operation procedures dealing with postulated accidents and transients recorded from a full-scale plant simulator in the training center of a Chinese NPP were selected as references. According to the results of simulation and analysis, the potential problems in the HMI design and the operation procedures were detected. Suggestions to improve the HMI design and the operation procedures were addressed.     

Application of a chromium‐free photoresist to CRT screen processing

In 1998, Toyo Gosei Co. published a paper on the development of a new water‐soluble photopolymer of high sensitivity, PVA‐ARBB. In close co‐operation with LG. Philips Displays, the new material was further developed to be applicable in patterning the phosphor layer of a CRT screen. The new material shows about 3 times higher light sensitivity, gives 4–5% higher luminance, has no dark reaction, and is chromium‐free. It is the first chromium‐free photoresist used for phosphor patterning in CRT mass production. A comparison is presented between the conventional resist and the new resist. A survey is given of the most important process conditions.     

On-Site Fabrication of Crystalline Cerium Oxide Films and Patterns by Ink-Jet Deposition Method at Moderate Temperatures

Crystalline CeO₂ films and patterns have been successfully fabricated in a "single-step process" at moderate temperature. In this process, the combination of the ink-jet technique and depositing the precursor on a hot substrate (≤300°C) gave crystalline CeO₂ without further heat treatment. X-ray diffraction analysis revealed that the phase formed was crystallized ceria with nanosized (<10 nm) crystallites. The film thickness was several hundred nanometers and the pattern width was about 150 μm. Scanning electron microscopy analysis showed that the films and patterns were free of cracks and adhered to the substrate. This is the first report about the direct patterning of crystalline CeO₂ without postfiring or posttreatments like masking, etching, etc.     

Future of international cooperative activity for graduate school education in nuclear field

Further improvement of graduate school education in nuclear field is one of the important issues in universities in nuclear field. The COE-INES program has performed international cooperative activities for graduate school education with foreign universities in nuclear field. There are a lot of possibilities in international cooperation with foreign universities for graduate school education. The use of Internet can be a strong tool for the activities.     

Geometric control and tuneable pore size distribution of buckypaper and buckydiscs

The fabrication of buckypaper from unfunctionalised multi-walled carbon nanotubes (MWCNTs) without the aid of surfactants or surface modification techniques is accomplished through a novel and quick frit compression method. The dimensions can be controlled through the size of the syringe housing and the through the mass of carbon nanotubes added. Their thicknesses are typically much larger than surfactant-cast buckypaper and range from 120 μm up to 650 μm; buckypaper with thicknesses larger than 500 μm we call buckydiscs. Buckypaper and buckydiscs are mechanically robust to handle, flexible, stable in solvents and possess larger porosities than Triton-X100 cast buckypaper. They also exhibit a memory effect when bending wetted samples, returning to their former geometry on drying. Buckypaper and buckydiscs were studied by mercury intrusion porosimetry to reveal a defined distribution of mesopores and small macropores that is, along with their density and apparent free volume, dependant on the casting solvent and therefore tuneable. Moreover, the frit compression system also allows control over the 3-dimensional geometry of the buckydiscs during the casting process.     

Cognitive deficits in docosahexaenoic acid-deficient rats.

This study investigated the influence of brain docosahexaenoic acid (DHA) deficiency on simple and complex olfactory-based learning and memory in 2nd generation (F2) adult male rats. Rats raised and maintained on either an n-3-adequate or an n-3-deficient diet were tested for acquisition of an olfactory learning set and an olfactory memory task, and for motivation to obtain a water reward. Despite a 76% decrease in brain DHA, n-3-deficient rats were able to acquire most simple 2-odor discrimination tasks but were deficient in the acquisition of a 20-problem olfactory learning set. This deficit could not be attributed to changes in sensory capacity but, instead, appeared to represent a deficit in higher order learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development and application of the Fraunhofer-diffraction method for measurements of plasma density fluctuations using infrared lasers

This paper is concerned with systematic developments of the Fraunhofer-diffraction method for studies of plasma density fluctuations in high-temperature plasmas using infrared lasers, namely (i) development of the general theory of the Fraunhofer-diffraction method, (ii) measurements of fluctuations propagating in an azimuthal direction, (iii) measurements of fluctuation intensities, and (iv) application in measurements on high-temperature plasmas.