Low-bending-loss single-mode fibers for fiber-to-the-home

Recent progress on low-bending-loss single-mode optical fibers for fiber-to-the-home (FTTH) is reviewed. Designing and manufacturing for three types of fibers-a step-index-profile fiber, a trench-index-profile fiber, and a holey fiber-are discussed. The trench-index-profile fibers and the holey fibers are confirmed to be candidates for indoor wiring because of their low bending losses, as well as splice losses.     

Stereospecific analysis of triacyl-sn-glycerols by chiral high-performance liquid chromatography

A method for the stereospecific analysis of triacyl-sn-glycerols by high-performance liquid chromatography (HPLC) on a chiral column is described. Triacyl-sn-glycerols were partially degraded with ethyl magnesium bromide, and the monoacylglycerols produced were separated as 1- and 2-monoacylglycerol fractions by thin-layer chromatography on boric acid-impregnated silica gel plates. The 1-monoacylglycerols were resolved intosn-1 andsn-3 monoacylglycerol fractions by HPLC on a chiral column (Sumichiral OA-4100) after derivatization with 3,5-dinitrophenyl isocyanate. Fatty acid methyl esters obtained from the original triacyl-sn-glycerols, 1- and 2-monoacylglycerol fractions, andsn-1 andsn-3 monoacylglycerol fractions were analyzed by gas chromatography on open-tubular columns. Stereospecific acyl distributions in triacyl-sn-glycerols were calculated from the data. The acyl distributions of several oils were obtained. The method is rapid, simple and gave reproducible results.     

A non‐repudiable negotiation protocol for security service level agreements

Security service level agreements (SSLAs) provide a systematic way for end users at home or in the office to guarantee sufficient security level when doing business or exchanging sensitive personal or organizational data with an online service. In this paper, we propose an SSLA negotiation protocol that implements non‐repudiation with cryptographic identities and digital signatures and includes features that make it resistant to denial of service attacks. The basic version of the protocol does not rely on the use of a trusted third party, and it can be used for all kinds of simple negotiations. For the negotiation about SSLAs, the protocol provides an option to use an external knowledge base that may help the user in the selection of suitable security measures. We have implemented a prototype of the system, which uses JSON Web Signature for the message exchange and made some performance tests with it. The results show that the computational effort required by the cryptographic operations of the negotiation protocol remains at a reasonable level. Copyright © 2014 John Wiley & Sons, Ltd.     

Reflection and absorption characteristics of electromagnetic waves for PV modules

In this paper, the authors investigated the reflection and absorption characteristics of a general photovoltaic (PV) module. As a result, the electromagnetic waves could be attenuated only 6 dB in typical PV module. However, if the PV module is installed in the outer wall of buildings, electromagnetic interference is caused by the surroundings. To reduce this electromagnetic interference, the authors suggested a method to absorb electromagnetic wave using multiple PV modules that have deference impedance, and simulation was performed. As a result, it was confirmed that using a typical PV module and the PV module including electronic device, the reflection waves of those PV modules could be attenuated up to 12 dB.     

Performance evaluation of heat exchanger using alternative refrigerant R407C

R22 (HCFC22) has been widely used as the refrigerant in air conditioners. According to the Montreal protocol for ozone layer protection, the total production of HCFCs has been capped since the beginning of 1996. Zeotropic refrigerant mixture R407C and nearly azeotropic refrigerant mixture R410A have been selected as alternatives to R22. We examined refrigerant passages in heat exchangers used in heat pump‐type room air conditioners using zeotropic refrigerant R407C through simulation, and obtained the following conclusions. In an indoor heat exchanger, a counter flow configuration when operating as a condenser has higher temperature efficiency. When an outdoor heat exchanger operates as an evaporator, a configuration that suppresses the temperature glide by partially reducing the refrigerant passage not only produces high efficiency, but also reduces the frost formation on fins. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(8): 626–638, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10064     

Effect of Non-Equilibrium Condensation of Moist Air on Flow Field in Ludwieg Tube

The time-dependent behavior of non-equilibrium condensation of moist air through a Ludwieg tube with a diaphragm downstream is investigated by using a computational fluid dynamics work. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The present computations represent the experimental flows well. The results obtained show that for an initial relative humidity over 40 %, the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to non-equilibrium condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity. Furthermore, the variations of condensation properties are also di     

Gas Absorption by Wavy Falling Liquid Film Formed on Inner Surface of Vertical lubes

An experimental study on gas absorption into falling liquid film formed on inner surface of vertical tubes has been carried out in order to clarify fundamental characteristics of the gas absorption and enhancement by surface waves. The water supplied into the test tubes is periodically disturbed by fluctuating a silicon tube before the test section with a speaker and the wavy films absorb the oxygen filled in the tubes. Imposing the periodic disturbance enhances the gas absorption and the enhancement has a maximum at around 20-30 Hz, where the gas absorption is 20-30% higher. Mass transfer coefficients obtained with five tubes agree well with those obtained with single tube. Two-dimensional numerical simulations have also been conducted for gas absorption by wavy film and the enhancement mechanism of the gas absorption is discussed.     

Carbon-coated stainless steel as PEFC bipolar plate material

Stainless steel is quite attractive as bipolar plate material for polymer electrolyte fuel cells (PEFCs). Passive film on stainless steel protects the bulk of it from corrosion. However, passive film is composed of mixed metal oxides and causes a decrease in the interfacial contact resistance (ICR) between the bipolar plate and gas diffusion layer. Low ICR and high corrosion resistance are both required. In order to impart low ICR to stainless steel (SUS304), carbon-coating was prepared by using plasma-assisted chemical vapor deposition. Carbon-coated SUS304 was characterized by Raman spectroscopy and atomic force microscopy. Anodic polarization behavior under PEFC operating conditions (H₂SO₄ solution bubbled with H₂ (anode)/O₂ (cathode) containing 2 ppm HF at 80 °C) was examined. Based on the results of the ICR evaluated before and after anodic polarization, the potential for using carbon-coated SUS304 as bipolar plate material for PEFC was discussed.     

Self-aligned locally diffused emitter (SALDE) silicon solar cell

This paper presents, for the first time, a low-cost, high-throughput manufacturing approach for fabricating n-base dendritic web silicon solar cells with selectively doped emitters and self-aligned aluminum contacts using rapid thermal processing (RTP) and screen printing. The self-aligned locally diffused emitter (SALDE) structure is p⁺ nn⁺⁺ where aluminum is screen-printed on a boron-doped emitter and fired in a belt furnace to form a deep self-doped p⁺-layer and a self-aligned positive contact to the emitter according to the well-known aluminum-silicon (Al---Si) alloying process. The SALDE structure preserves the shallow emitter (20.2 μm) everywhere except directly beneath the emitter contact. There the junction depth is greater than 5 μm, as desired, in order to shield carriers in the bulk silicon from that part of the silicon surface covered by metal where the recombination rate is high. This structure is realized by using n-base (rather than p-base) substrates and by utilizing screen-printed aluminum (rather than silver) emitter contacts. Prototype dendritic web silicon (web) cells (25 cm² area) with efficiencies up to 13.2% have been produced.