Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Canonical transformation and stabilization of generalized Hamiltonian systems

This paper introduces generalized canonical transformations for generalized Hamiltonian systems which convert a generalized Hamiltonian system into another one, and preserve the generalized Hamiltonian structure of the original. As in classical mechanics, it is expected that canonical transformations will provide new insights and fundamental tools for both analysis and synthesis of those systems. Firstly, the class of generalized canonical transformations and some of their properties are indicated. Secondly, it is shown how to stabilize the generalized Hamiltonian systems using canonical transformations. In addition, some examples illustrate how such transformations are utilized for control systems design.     

Reduction of in vitro allergenicity of buckwheat Fag e 1 through the Maillard-type glycosylation with polysaccharides

A major allergenic protein of buckwheat, Fag e 1 prepared from common buckwheat (Fagopyrum esculentum), was covalently linked with food-grade polysaccharides, arabinogalactan or xyloglucan through the controlled dry-heating at 60 °C under 65% relative humidity. The introduction of polysaccharide chain onto the molecular surface of Fag e 1 reduced the allergenicity of Fag e 1. The results revealed that the Maillard-type glycosylation of Fag e 1 with polysaccharides brought about a drastic reduction of the reactivity against human sera of buckwheat-allergy subjects, using immuno dot-blotting, QCM analysis and ELISA. In addition, the glycosylation of Fag e 1 yielded a great improvement of its surface functionality. Solubility of Fag e 1 at the neutral pH was substantially increased up to 13.5 times and 9.6 times by the conjugation with arabinogalactan and xyloglucan, respectively. Emulsifying properties of Fag e 1 were also improved by the glycosylation, of which both emulsifying activity and emulsion stability were more than 6 times higher than those of the native protein.     

Highly unsaturated fatty acid might act as an antioxidant in emulsion system oxidized by azo compound

Now it is recognized that DHA is oxidatively stable fatty acid compared with linoleic acid (LA) in emulsified system, although DHA is oxidatively unstable in a bulk system. In fact, an emulsified mixture of DHA and LA behaves as in a bulk system, namely the oxidative stability of DHA becomes lower than that of LA. Therefore, in this study, tridocosahexaenoate (DDD) and glycerol trilinoleate (LLL) were separately emulsified using TritonX-100 as an emulsifier and DDD emulsion was mixed with the oxidizing LLL emulsion using a water-soluble radical initiator, 2,2'-azobis(2-aminopropane) dihydrochloride. As a result, DHA suppressed the oxidation of LA, while DHA was not significantly oxidized. This suppression ability was examined using glycerol trieicosapentaenoate, glycerol trilinolenate, or glycerol trioleate instead of DDD and it was found that this activity was increased with the increasing number of double bonds in the structure. Furthermore, the same type of experiment was carried out using a lipid-soluble radical initiator, 2,2'-azobisisobutyronitrile and the similar result was obtained. These results indicated that a highly polyunsaturated fatty acid might act as an antioxidant in an emulsion system oxidized by an azo compound.     

Multiphase composites of tetragonal zirconia agglomerate dispersed into alumina and alumina-zirconia matrices

Multiphase composites of yttria- and ceria-doped tetragonal zirconia agglomerates (10–50 m) dispersed into an alumina or alumina-zirconia matrix were sintered at 1500–1600 °C in air, followed by post-Hot Isostatic Pressing (HIP) at 1450°C and 150 MPa in an Ar gas atmosphere. The relative density of the recovered composites was above 98% of the theoretical density. By chemically etching on the surface of zirconia agglomerates, the sinterability of composites was apparently improved; and no microcracks nor pores were observed at the interface of agglomerate and matrix. According to scanning electron microscopy (SEM) observation, tetragonal and tetragonal-monoclinic zirconia agglomerates were highly dispersed into the alumina or alumina-zirconia matrix. The multiphase composites containing 10 vol% spherical agglomerates demonstrate the relatively low value of bending strength, < 400 MPa, and a high value of fracture toughness, > 11 MPa m^1/2. The crack propagation introduced by Vickers indentation was efficiently suppressed and deflected by the agglomerates.     

Influence of two different modes of resistance training in female subjects

In resistance training, it has been empirically accepted that muscle hypertrophy is developed by low intensity and high volume training, while muscle strength and power are developed by high intensity and low volume training. The purpose of the present study was to investigate the influence of two different modes of resistance training on isokinetic strength and muscle cross-sectional area (CSA) in females. Eleven females, who had no experience in resistance training, participated in this study and were randomly divided into two groups. The former consisted of 4-5 sets of 15-20 RM (repetition maximum) with sufficient rest between sets (Group H), while the latter consisted of 8-9 sets of 4-6R M with 90 s of rest between sets (Group S). The former was assumed to be appropriate for muscle hypertrophy and the latter muscle strength, respectively. All subjects completed isotonic knee extension exercise three times a week for 8 weeks. Measurements were made on quadriceps muscle cross-sectional area (CSA) and isokinetic torques at 0, 60, 180, and approximately 300 degrees before training, at the fifth week and the end of training period. Muscle CSA was defined as the sum of CSA measured at 30, 50 and 70% of femur length. After training, muscle CSA had significantly increased in both groups: 3.3 +/- 0.7% (p < .05) for group H and 3.6 +/- 1.1% (p < .05) for group S, respectively. While the changes in isokinetic torque were 43.4 +/- 47.5% (p < .05) for group H and 27.4 +/- 31.3% (p < .05) for group S, respectively. In both groups the percentage changes of the isokinetic strength were significantly higher than those of the CSA. No significant difference in these variables were found between the two groups. These results suggest that during the early phase of resistance training two different modes of resistance training may have similar effects on muscle CSA and isokinetic strength in untrained females.     

Analysis of demand‐priority access using a priority queue with server vacations and message dependent switchover times

In this paper, we analyse the message waiting times in a local area network (LAN) that uses the demand‐priority access method. This is a priority‐based round‐robin arbitration method where the central controller (the repeater) polls its connected ports to determine which have transmission requests pending and the requests' priority classes. We model it as a 2‐priority M/G/1 queue with multiple server vacations and switchover time between service periods. The service discipline is nonpreemptive and the length of the switchover time is dependent upon the priority class of the preceding message served as well as that of the message to be served next. We provide an approximate analysis for the waiting times of both message classes and derive expressions for the Laplace–Stieltjes transforms (LST) of the stationary distributions and the mean waiting times. We conclude with numerical and simulation results to show the applicability and accuracy of the analytical model. This revised version was published online in June 2006 with corrections to the Cover Date.     

Time dependent changes occurring in rat liver microsomes upon lipid peroxidation

Steady-state fluorescence anisotropy of diphenylhexatriene and n-(9-anthroyloxy)stearic acids (n=2,12) in rat liver microsomes showed a marked increase in the early stages of enzymatically or non-enzymatically induced lipid peroxidation. The changes in fluorescence anisotropy occurred in parallel with the formation of thiobarbituric acid-reactive substances (TBA-RS). Parallel to these changes, the fluorescence emitted from peroxidized microsomes increased markedly in the early stages of lipid peroxidation. In contrast to the changes in the fluorescence anisotropy and in the formation of TBA-RS, the fluorescence showed a continuing increase over the three hr period of lipid peroxidation. Glucose-6-phosphatase was inactivated in the early stages of lipid peroxidation, whereas NADH-cytochrome b₅ reductase underwent a slow deactivation over three hr. The apparently slow deactivation of the peripheral protein may be explained by the formation of fluorescent substances.     

Optimal allocation of area in hierarchical road networks

This paper deals with the hierarchical road network design using a continuous model. The model is based on a grid road network where roads are classified into three types: access roads, minor arterial roads, and major arterial roads. Using a continuous approximation in which the distance is measured as the rectilinear distance, we obtain a simple approximation for the total travel time. We then find the optimal allocation of area taken up by roads at each level of the hierarchy so as to minimize the sum of the travel and construction costs. The result demonstrates how the total traffic volume, the traffic composition, and the unit construction cost affect the optimal road area. The optimal area of major arterial roads increases with the total traffic volume and the proportions of inward, outward, and through traffic and decreases with the unit construction cost.     

Fin efficiency of serrated fins. Part 4. Correction factor for inline arrangement

A correction factor to the theoretical fin efficiency of serrated fins, reported in Part 1 and Part 2 of this report, was derived for an inline arrangement experimentally. The experiment was performed using an open‐type wind tunnel with six kinds of test finned‐tubes made of copper, carbon steel and stainless steel, which were arranged in one to five rows. Heat transfer measurement was done by the local thermal simulation method. The derived correction factor for the 1st row was the same as for staggered arrangement reported in Part 3, for the 2nd and deeper rows, however, a further correction was needed, which may be caused by the difference in the nonuniformity in heat transfer coefficient over the fin surface. © 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(4): 258–269, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20008