A New Approach to Suppress the Effect of Machining Error for Waveguide Septum Circular Polarizer at 230 GHz Band in Radio Astronomy

A new stepped septum-type waveguide circular polarizer (SST-CP) was developed to operate in the 230 GHz band for radio astronomy, especially submillimeter-band VLBI observations. For previously reported SST-CP models, the 230 GHz band is too high to achieve the design characteristics in manufactured devices because of unexpected machining errors. To realize a functional SST-CP that can operate in the submillimeter band, a new method was developed, in which the division surface is shifted from the top step of the septum to the second step from the top, and we simulated the expected machining error. The SST-CP using this method can compensate for specified machining errors and suppress serious deterioration. To verify the proposed method, several test pieces were manufactured, and their characteristics were measured using a VNA. These results indicated that the insertion losses were approximately 0.75 dB, and the input return losses and the crosstalk of the left- and right-hand circular polarization were greater than 20 dB at 220–245 GHz on 300 K. Moreover, a 230 GHz SST-CP was developed by the proposed method and installed in a 1.85-m radio telescope receiver systems, and then had used for scientific observations during one observation season without any problems. These achievements demonstrate the successful development of a 230 GHz SST-CP for radio astronomical observations. Furthermore, the proposed method can be applicable for observations in higher frequency bands, such as 345 GHz.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.     

Speed and accuracy comparison of techniques for multiuser detection in synchronous CDMA

In this letter, we compare the complexity and efficiency of several methods used for multiuser detection in a synchronous code-division multiple-access system. Various methods are discussed, including decision-feedback (DF) detection, group decision-feedback (GDF) detection, coordinate descent, quadratic programming with constraints, space-alternating generalized EM (SAGE) detection, Tabu search, a Boltzmann machine detector, semidefinite relaxation, probabilistic data association (PDA), branch and bound (BBD), and the sphere decoding (SD) method. The efficiencies of the algorithms, defined as the probability of group detection error divided by the number of floating point computations, are compared under various situations. Of particular interest is the appearance of an "efficient frontier" of algorithms, primarily composed of DF detector, GDF detector, PDA detector, the BBD optimal algorithm, and the SD method. The efficient frontier is the convex hull of algorithms as plotted on probability of error versus computational demands axes: algorithms not on this efficient frontier can be considered dominated by those that are.     

Approaching Trap-Minimized Polymer Thin-Film Transistors

Semiconducting π-conjugated polymers are the most promising candidates for flexible electronics owing to their facile processability and mechanical robustness; however, achieving steep and stable switching operations in polymer thin-film transistors (TFTs) remains a serious challenge. Herein, it is shown that whole optimizations for eliminating interfacial carrier traps throughout the conductive path are necessary in achieving TFTs showing both exceptionally sharp switching and bias-stress-free characteristics. Inverted-coplanar-type TFTs composed of a highly lyophobic amorphous perfluoropolymer gate–dielectric interfaced with a push-coated semiconducting polymer layer are manufactured. The use of the dielectric allows the establishment of bias-stress-free characteristics with minimized contact resistance. Additionally, fairly sharp on/off switching TFTs with the smallest normalized subthreshold swing can be obtained by utilizing a particular donor–acceptor copolymer that involves a self-passivation mechanism working to achieve a trap-minimized interface. These findings have opened a way for low-power and robust device operations in polymer-based flexible electronics.     

Single-Photon Interference Experiment Over 80 km With a Pulse-Driven Heralded Single-Photon Source

We have conducted a single-photon interference experiment over an 80-km optical fiber using a pulse-driven heralded single-photon source (HSPS). To the best of our knowledge, this is, thus far, the longest distance over which a single-photon interference experiment has been conducted using HSPSs (continuous-wave-pumped or pulse-driven). The effect of the 80-km transmission on the dispersion and fluctuation of polarization are more severe than those in our previous 40-km quantum key distribution (QKD) experiment. We have overcome the difficulties by some fine tunings and low-jitter controlling. By conducting ten consecutive transmission experiments over a total time of 30 min, an average quantum bit-error rate (QBER) of 7.9 plusmn 1.2% has been obtained. This QBER is lower than the threshold QBER of 10.55% which is considered as a limit for unconditional security for the QKD under negligible multiphoton emission.     

D‐A1‐D‐A2 Backbone Strategy for Benzobisthiadiazole Based n‐Channel Organic Transistors: Clarifying the Selenium‐Substitution Effect on the Molecular Packing and Charge Transport Properties in Electron‐Deficient Polymers

Unipolar n‐type semiconducting polymers based on the benzobisthiadiazole (BBT) unit and its heteroatom‐substituted derivatives are for the first time synthesized by the D‐A₁‐D‐A₂ polymer‐backbone design strategy. Selenium (Se) substitution is a very effective molecular design, but it has been seldom studied in n‐type polymers. In this study, within the similar conjugated framework, the Se substitution effects on the optical, electrochemical, solid‐state polymer packing, electron mobility, and air‐stability of the target unipolar n‐type polymers are unraveled. Replacing the sulfur (S) atom in the thiadiazole heterocycles with the Se atom leads to narrower bandgaps and deeper lowest unoccupied molecular orbital (LUMO) levels of the n‐type polymers. Furthermore, the Se‐substituted polymer (pSeN‐NDI) shows shorter lamellar packing distances and stronger edge‐on π–π stacking interactions than its S‐counterpart (pSN‐NDI), as observed by the two‐dimensional grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) patterns. With the deeper LUMO level and thin‐film microstructures suitable for transistors, pSeN‐NDI exhibits four‐fold higher electron mobilities (μ_e) than pSN‐NDI. However, the other Se‐containing polymer, pSeS‐NDI, forms rather amorphous film structures, which is caused by its limited thermal stability and decomposition during the thermal annealing processes, thus giving rise to a lower μ_e than its S‐counterpart (pBBT‐NDI). Most importantly, pBBT‐NDI demonstrates an electron mobility of 0.039 cm² V^?1 s^?1, which is noticeable among the unipolar n‐type polymers based on the BBT and its analogs.     

Analysis of demand‐priority access using a priority queue with server vacations and message dependent switchover times

In this paper, we analyse the message waiting times in a local area network (LAN) that uses the demand‐priority access method. This is a priority‐based round‐robin arbitration method where the central controller (the repeater) polls its connected ports to determine which have transmission requests pending and the requests' priority classes. We model it as a 2‐priority M/G/1 queue with multiple server vacations and switchover time between service periods. The service discipline is nonpreemptive and the length of the switchover time is dependent upon the priority class of the preceding message served as well as that of the message to be served next. We provide an approximate analysis for the waiting times of both message classes and derive expressions for the Laplace–Stieltjes transforms (LST) of the stationary distributions and the mean waiting times. We conclude with numerical and simulation results to show the applicability and accuracy of the analytical model. This revised version was published online in June 2006 with corrections to the Cover Date.     

Improvement of inductive power collection in null-flux maglev system

In the superconducting maglev system it is important to develop a non-contact on-board power source without environmental pollution such as noise and exhaust gases; therefore, inductive power collection (IPC), which utilizes a harmonic magnetic field generated by ground coils in EDS, is being studied. However, alteration to a null-flux EDS that has a high drag ratio reduces the power collecting capacity in the IPC system. In addition, power collecting coils are located on the cryostat of the superconducting coil (SC), so eddy currents at the cryostat also reduce the power collecting capacity. Therefore, an exclusive SC type that locates the exclusive SCs and IPC and power collecting coils so as to face the upper and lower coils of ground coils, respectively, is examined; but we aim to improve the conventional type. After analyzing the influence of eddy currents at the cryostat in detail and improving the composition of the power collecting coil and cryostat, we found that the conventional type has the same capacity as the exclusive SC type. In order to prove the above-mentioned result, we measured the induced voltage of the new-type coils in a test run at Miyazaki test track and confirmed the output of this IPC system in a full-scale synthetic bench test with a PWM converter and magnetic field simulator. © 1998 Scripta Technica. Electr Eng Jpn, 122(2): 48–60, 1998     

Reduction of false positives in lung nodule detection using a two-level neural classification

The authors have developed a neural-digital computer-aided diagnosis system, based on a parameterized two-level convolution neural network (CNN) architecture and on a special multilabel output encoding procedure. The developed architecture was trained, tested, and evaluated specifically on the problem of diagnosis of lung cancer nodules found on digitized chest radiographs. The system performs automatic "suspect" localization, feature extraction, and diagnosis of a particular pattern-class aimed at a high degree of "true-positive fraction" detection and low "false-positive fraction" detection. In this paper, the authors aim at the presentation of the two-level neural classification method in reducing false-positives in their system. They employed receiver operating characteristics (ROC) method with the area under the ROC curve (A(z)) as the performance index to evaluate all the simulation results. The two-level CNN showed superior performance (A(z)=0.93) to the single-level CNN (A(z)=0.85). The proposed two-level CNN architecture is proven to be promising and to be extensible, problem-independent, and therefore, applicable to other medical or difficult diagnostic tasks in two-dimensional (2-D) image environments.     

Realistic image synthesis of a deformable living thing based on motion understanding

This paper describes a system that can synthesize realistic sequential images of moving goldfish based on the image understanding result of real goldfish. To analyze and synthesize images in real-time, we have constructed a hardware system that consists of 32 paralell transputers with a high-speed visual-data interface called VIT (Visual Interface for Transpputer Network). The system is very flexible and powerful for various types of image processing because it can be extended according to the required computational cost. In the understanding process, we assume that the target object, a goldfish in this case, deforms its shape pliably in 3-D space and moves only in a two-dimensional direction. A modeling, called the Bone-Structured Solid Modeler, which is suitable for representing deformable objects such as living things, plays an important role in the understanding and synthesis processes of the deformable object. Three types of constraints for motion, namely, static, dynamic, and object, are utilized to verify the estimated pose and orientation of the object. In the motion synthesis process, realistic moving images are synthesized by controlling the model employing the motion understanding result. Simulation results are presented to show the effectiveness of the system. The technology discussed in this paper is expected to play a key role in the realization of future visual human interfaces.