Wide-speed operation of interior permanent magnet synchronousmotors with high-performance current regulator

Interior permanent magnet synchronous motors can be applied to applications requiring wide-speed operation. The current vector control algorithm of an interior permanent magnet synchronous (IPM) motor for constant power operation over the base speed is proposed. As the available voltage controlling the armature current vector is small in the flux-weakening constant power region, the current vector sometimes becomes uncontrollable in transient operations because of the current regulator saturation. The high-performance current regulator is also proposed to improve the current responses in the flux-weakening region, which includes the decoupling current controller and the voltage command compensator. The control performances are confirmed by several drive tests with respect to the prototype IPM motor     

Design of High-Quality Pt–CeO2 Composite Anodes Supported by Carbon Black for Direct Methanol Fuel Cell Application

A Pt on nano-sized CeO₂ particles that in turn are supported on carbon black (CB) was synthesized using the co-impregnation method. This potential anode material for fuel cell applications was synthesized in a stepwise process. The pure CeO₂ was synthesized using an ammonium carbonate precipitation method, and the Pt particles dispersed on the CeO₂ in such a way that a uniform dispersion with the CB was obtained (Pt–CeO₂/CB). The electrochemical activity of the methanol (CH₃OH) oxidation reaction on the Pt–CeO₂/CB was investigated using cyclic voltammetry and chronoamperometry experimentation. The onset potential of CH₃OH oxidation reaction on the Pt–CeO₂/CB anode was shifted to a lower potential as compared with that on commercially available Pt–Ru/carbon (C) alloy anode. In addition, the activation energy of the Pt–CeO₂/CB anode was much lower than that of the Pt–Ru/C alloy anode. Moreover, the current density of the Pt–CeO₂/CB anode was much higher than that of the Pt–Ru/C alloy anode at temperatures between 28° and 60°C. These results suggest that the anode performance of the Pt–CeO₂/CB anode at the operating temperature of typical fuel cells (80°C) is superior to that of the more usual Pt–Ru/C alloy anode. Importantly, the rare metal, Ru, is not required in the present anode material and the amount of Pt required is also significantly reduced. As a consequence, we report a promising candidate Pt–CeO₂/CB composite anode for application in the development of direct methanol fuel cells.     

Analysis of a coal-derived liquid using highpressure liquid chromatography and synchronous fluorescence spectrometry

Synchronous fluorescence spectra of model polycondensed aromatic hydrocarbon molecules were recorded and used to identify the number of condensed rings in the aromatic molecules. A coal-derived liquid from Yubarishinko coal was initially separated into fractions having different number of condensed aromatic rings, and each fraction was further divided into narrow fractions having different numbers of carbon atoms. These fractions were studied using synchronous fluorescence spectroscopy. Results indicate the potential usefulness of synchronous fluorescence spectroscopy as a method of analysis of complex mixtures as coal-derived liquids despite the limitation of the method that some molecules give only weak peaks. Several components in some fractions were identified by a combination of synchronous fluorescence spectra and conventional excitation and emission fluorescence spectra.     

Properties of novel diallyl phthalate resin modified with sulfur‐containing allyl ester compounds

Sulfur‐containing allyl ester, which reacts with diallyl phthalate (DAP) resin to have allyl groups, was synthesized by the reaction of allyl phthalic acid with bisphenol having sulfur atoms. The sulfur‐containing allyl ester compound was blended with DAP resin to improve the adhesive properties to copper. By modification with sulfur‐containing allyl ester compound, the T‐peel adhesive strength and the lap shear adhesive strength to copper was improved. In particular, the adhesive strength was greatly improved when the resin was modified with the allyl ester compound having a disulfide bond (?S?S?) (DADS). It is concluded that this result is due to the improvement of the interfacial adhesive strength because the sulfur atom was found to be located in the surface of the copper by Fourier transform infrared (FTIR) analysis. The glass transition temperature (T_g) and the thermal decomposition temperature (T_d) of the cured DAP resin modified with DADS slightly decreased with increasing concentration of DADS. The lowering of T_g is because the crosslinking density of the DAP resin modified with DADS is smaller than that of DAP resin. Moreover, from thermogravimetric analysis, the lowering of Td of the DAP resin modified with DADS is because DADS is likely to pyrolyze. © 2013 Society of Chemical Industry     

Preparation of a Near-Infrared Ray Absorption Film from N-Phenylthiocarbamoyl Chitosan Derivative

We recently observed that the decanoylation of N-phenylthiocarbamoyl chitosan (2) with a mixture of decanoic anhydride and pyridine at 60 °C for 24 h afforded N,N-(decanoyl)phenythiocarbamoyl-/2-isothiocynato chitosan decanoate (3b) rather than the expected product N,N-(decanoyl)phenylthiocarbamoyl chitosan decanoate (3a). This result suggested that some of the N,N-(decanoyl)phenylthiocarmbamoyl groups had been converted to isothiocyanate groups during the decanoylation process. The subsequent reaction of compound 3b with aniline gave N,N-(decanoyl)phenylthiocarbamoyl/N-phenylthiocarbamoyl chitosan decanoate (4) in high yield. A solution of compound 4 in CHCl₃ was then added to a solution of copper decanoate (5) in the same solvent, and the resulting mixture was cast onto a glass plate to give a cast film. The film was annealed at 200 °C in an oven to give a greenish film, which showed good near-infrared absorption characteristic in the range of 800–2200 nm.     

Elastoplastic Finite Element Analysis and Strength Evaluation of Adhesive Butt Joints of Similar and Dissimilar Hollow Shafts Subjected to External Bending Moments

Stress distributions and deformation of adhesive butt joints are analyzed by an elastoplastic finite element method when the joints of similar and dissimilar shafts are subjected to external bending moments. The effects of the ratio of Young's modulus for the adherends to that for an adhesive and the effects of the adhesive thickness on the interface stress distribution are investigated. Joint strength is predicted by using the elastoplastic interface stress distributions. It is found that the singular stress at the edge of the interfaces increases with an increase of the ratio of Young's modulus. Measurement of strains in joints and experiments on joint strength were conducted. The numerical results are in fairly good agreement with the experimental results. It is observed that the joint strength for dissimilar shafts are smaller than those for similar shafts. A fracture of dissimilar adhesive up-bonded shafts occurred from the interface of the adherend with smaller Young's modulus. It is seen that joint strength increases as the adhesive thickness increases.     

Solid state NMR analysis of poly(L‐lactide) random copolymer with poly(ε‐caprolactone) and its reactive extrusion process

A random copolymer based on poly(L ‐lactide) (PLA) with poly(ε‐caprolactone) (PCL) was prepared and characterized by mechanical testing and solid state NMR, compared with a polymer blend. For a monofilament sample consisting of PLA/PCL random copolymer, there were negative correlations between the CL content and the mechanical properties: tensile strength, tensile elastic modulus, flexural rigidity, and flexural hysteresis decreased with increasing CL content. In contrast, the mechanical properties of the polymer blend were only slightly changed by addition of the CL unit. For the random copolymer, the addition of a small amount of CL reduced relaxation times, T₁C and T_1ρH, gradually. The T₁C and T_1ρH values correlated closely with the tensile elastic modulus and the tensile strength, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Simulation of mechanical properties of epoxy-based chemically amplified resist by coarse-grained molecular dynamics

The mechanical properties of an epoxy-based chemically amplified resists with various cross-linking ratios were simulated using a newly developed coarse-grained molecular dynamics simulation that employs a bead–spring model. Models with the different cross-linking ratios were created in the molecular dynamics calculation step and uniaxial elongation simulations were performed. The results reveal that the simulated elastic modulus of the resist modeled by the Kremer–Grest model with an extended angle bending potential depends on the cross-linking ratio, its dependency exhibits good agreement with that determined by nanoindentation tests.     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.