Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

Mechanism of carbon microbead formation from paraffin-pitch mixtures

We have proposed a model of carbon microbead formation from the mixture of coal-tar pitch and n-paraffin under mild conditions, supported by results obtained by high-temperature and high-pressure¹H nuclear magnetic resonance and electron spin resonance in conjunction with thermogravimetric and differential thermal analysis. The data obtained by different techniques are in good agreement with each other.     

Effects of hydroperoxide in breads on IgE antibody responses

The effect of hydroperoxide in breads on antigen-antibody reaction against IgE was examined. We compared the antigen-antibody reaction against IgE between dough including hydroperoxide and that not including hydroperoxide. Crude proteins extracted from the dough including hydroperoxide showed weak antigen-antibody reaction on allergic tests such as ring precipitin test with human-specific IgE, and the IgE binding activity on ELISA. In contrast, the dough without hydroperoxide showed antigen-antibody reaction. The crude proteins extracted from the dough with hydroperoxide or without hydroperoxide were applied by affinity chromatography of trypsin-immobilized chitin. Then proteins having affinity were recovered. The recovered proteins were separated by SDS-PAGE. Each protein was examined for the IgE binding activity on ELISA. The IgE binding activity of baked bread was studied as well. Crude proteins of baked bread made from dough including hydroperoxide showed weaker IgE binding activity on ELISA than proteins of baked bread made from dough without hydroperoxide. Those results suggested that addition of hydroperoxide into dough affects on antigen activation.     

Synthesis and luminescence of Sr2CeO4 fine particles

Fine particles of a blue emission phosphor Sr₂CeO₄ have been synthesized using a chemical co-precipitation technique, and the textual and luminescent properties were compared with the one synthesized by the conventional solid-state reaction method. Particle size and distribution of the Sr₂CeO₄ fine powder prepared by the co-precipitation process were smaller and narrower than those obtained by the samples prepared from the conventional one. The emission intensity of the fine particles was equal to that of the larger particles prepared from the solid-state reaction, on the contrary to the general tendency that emission intensity decrease with particle size reduction. Although no Ce³⁺ peaks were observed in EPR measurements, X-ray photoelectron spectra of the samples clearly elucidated the existence of Ce³⁺ only on the surface of Sr₂CeO₄.     

Development of confocal laser microscope system for examination of microscopic characteristics of radiophotoluminescence glass dosemeters

A confocal laser microscope system was developed for the measurement of radiophotoluminescence (RPL) photons emitted from a minute alpha-ray-irradiated area in an RPL glass dosemeter. The system was composed mainly of an inverted-type microscope, an ultraviolet laser, an XY movable stage and photon-counting circuits. The photon-counting circuits were effective in the reduction of the background noise level in the measurement of RPL photons. The performance of this microscope system was examined by the observation of standard RPL glass samples irradiated using (241)Am alpha rays. The spatial resolution of this system was ～ 3 μm, and with regard to the sensitivity of this system, a hit of more than four to five alpha rays in unit area produced enough amount of RPL photons to construct the image.     

A Method for Received Waveform Reconstruction Based on Bender Element Test Using Frequency-swept Signal

An experimental technique for reconstructing the received wave of bender element tests based on linear system theory is shown in this paper. In order to identify the frequency response of testing apparatus, bender element tests using frequency-swept signals are performed. Received waves for one-period sine pulse transmitting with various frequencies are calculated and compared with observed waves in several kinds of soil samples and testing apparatuses. The linearity of the testing system is also confirmed by coherence function. It is shown that calculated data are less affected by random noise and show good agreement with observed data in regards to not only waveform itself but also resulting shear wave velocity. It is mentioned that this technique can provide simulations for arbitrary transmitted waveform with high signal/noise ratio after laboratory tests are performed. It is also mentioned that this technique is advantageous when sufficient amplitude of received wave cannot be ensured or shear wave velocity must be verified, for example, due to uncertainty of arrival time by near-field effect.     

A rechargeable lithium metal battery operating at intermediate temperatures using molten alkali bis(trifluoromethylsulfonyl)amide mixture as an electrolyte

The physicochemical properties of molten alkali bis(trifluoromethylsulfonyl)amide, MTFSI (M = Li, K, Cs), mixture (x_LiTFSI = 0.20, x_KTFSI = 0.10, x_CsTFSI = 0.70) were studied to develop a new rechargeable lithium battery operating at intermediate temperature (100–180 °C). The viscosity and ionic conductivity of this melt at 150 °C are 87.2 cP and 14.2 mS cm⁻¹, respectively. The cyclic voltammetry revealed that the electrochemical window at 150 °C is as wide as 5.0 V, and that the electrochemical deposition/dissolution of lithium metal occurs at the cathode limit. A Li/MTFSI (M = Li, K, Cs)/LiFePO₄ cell showed an excellent cycle performance at a constant current rate of C/10 at 150 °C; 95% of the initial discharge capacity was maintained after 50 cycles. Except for the initial few cycles, the coulombic efficiencies were approximately 100% for all the cycles, indicating the stabilities of the molten MTFSI mixture and all the electrode materials.     

A Two-dimensional Stress Analysis and Strength of Single-lap Adhesive Joints of Dissimilar Adherends Subjected to External Bending Moments

The stress distributions of single-lap adhesive joints of dissimilar adherends subjected to external bending moments are analyzed as a three-body contact problem by using a two-dimensional theory of elasticity (plane strain). In the analysis, dissimilar adherends and an adhesive are replaced by finite strips. In the numerical calculations, the effects of the ratio of Young's moduli of adherends, the adherend thickness ratio and the adherend length ratio between dissimilar adherends on the stress distributions at the interfaces are examined. The results show that the stress singularity occurs at the ends of the interfaces, and its intensity is greater at the interface of the adherend with smaller Young's modulus. It is also noted that the singular stress is greater at the interface of the thinner adherend. It is found that the effect of the adherend length ratio on the stress singularity at the interfaces is very small. Joint strength is predicted by using the interface stress and it was measured by experiments. From the analysis and the experiments, it is found that the joint strength increases as Young's modulus of adherends and the adherend thickness increase while the effect of the adherend lengths on the joint strength is small. For verification of the analysis, a finite element analysis (FEA) is carried out. A fairly good agreement of the interface stress distribution is seen between the analytical and the FEA results.