Mammalian Cytochrome P450-Dependent Metabolism of Polychlorinated Dibenzo-p-dioxins and Coplanar Polychlorinated Biphenyls

Polychlorinated dibenzo-p-dioxins (PCDDs) and coplanar polychlorinated biphenyls (PCBs) contribute to dioxin toxicity in humans and wildlife after bioaccumulation through the food chain from the environment. The authors examined human and rat cytochrome P450 (CYP)-dependent metabolism of PCDDs and PCBs. A number of human CYP isoforms belonging to the CYP1 and CYP2 families showed remarkable activities toward low-chlorinated PCDDs. In particular, human CYP1A1, CYP1A2, and CYP1B1 showed high activities toward monoCDDs, diCDDs, and triCDDs but no detectable activity toward 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-tetraCDD). Large amino acids located at putative substrate-recognition sites and the F-G loop in rat CYP1A1 contributed to the successful metabolism of 2,3,7,8-tetraCDD. Rat, but not human, CYP1A1 metabolized 3,3'',4,4'',5-pentachlorobiphenyl (CB126) to two hydroxylated metabolites. These metabolites are probably less toxic than is CB126, due to their higher solubility. Homology models of human and rat CYP1A1s and CB126 docking studies indicated that two amino acid differences in the CB126-binding cavity were important for CB126 metabolism. In this review, the importance of CYPs in the metabolism of dioxins and PCBs in mammals and the species-based differences between humans and rats are described. In addition, the authors reveal the molecular mechanism behind the binding modes of dioxins and PCBs in the heme pocket of CYPs.     

Effect of the atmosphere on chemical composition and electrochemical properties of solid electrolyte interface on electrodeposited Li metal

Many efforts have been paid to realize the superior anodes for future Li batteries in either the dry Ar atmosphere or the dry air atmosphere. In this work, in order to clarify the effects of such atmospheres, the most reactive anodes of Li were freshly electrodeposited under the dry Ar or under the dry air condition. The Solid Electrolyte Interface (SEI) formed during the electrodeposition of Li anodes is revealed to have a different chemical composition and protective feature. The Li deposited under the dry air was revealed to have longer cycle life in the electrolyte than that deposited in Ar, even in the electrolyte containing ionic liquid. From the XPS results, the SEI formed in dry air is proved to be different from that formed in Ar gas atmospheres, that is, the SEI formed in dry air consists of Li₂CO₃ and Li nitride. In order to improve the performance of the anodes, the atmosphere for the initial preparation of the anode/electrolyte interface should be tuned.     

Selective preparation of oligomeric naphthylene ether and its applications to epoxy resin for silicon carbide power semiconductor device materials

In this study, a novel method for selective synthesis of naphthylene ether trimers by self‐condensation of 2,7‐dihydroxynaphthalene in the presence of catalytic amount of potassium hydroxide was reported. An epoxy resin from the trimers was prepared and properties of the cured epoxy resin were examined. The cured resin showed not only good physical thermal stability, such as high glass transition temperature and low thermal expansion coefficient, but also good chemical thermal stability like high thermal decomposition temperature. Additionally, low moisture absorption of the cured resin was confirmed. From these results, the newly prepared epoxy resin with naphthylene ether skeletons was considered to be suitable for advanced applications such as silicon carbide power semiconductor device. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43339.     

Mechanism of Catalytic Effects on AMMO/HMX Composite Propellants Combustion Rates

Thermal decomposition and the burning properties of AMMO/HMX propellants have been investigated. The heat generated by the AMMO decomposition initiated and accelerated the thermal decomposition of HMX, and the reaction between decomposed AMMO and HMX depended upon the heating rate. The rate determining step of the reaction path was different in higher and lower heating rate conditions. 2,2-bis(ethylferrocenyl)propane (CFe) and copper chromite (CuC) significantly altered the mechanisms of the thermal decomposition and the burning properties. CFe showed an increase in burning rate with a slight increase in burning rate exponent. However, CuC yielded high values for the burning rate exponent. The combined additive yielded the highest burning rate with the lowest burning rate exponent. The influence of CuC on the burning rate exponent disappeared by the combination with CFe. Though CFe and the combination additive improved the ignitability of the propellants, the propellant with CuC was difficult to ignite because of the relatively small quantity of heat feedback and/or heat released by the decomposition.     

Fabrication of Translucent Magnesium Aluminum Spinel Ceramics

A precursor for magnesium aluminum spinel powder, composed of crystalline ammonium dawsonite hydrate (NH₄Al(OH)₂CO₃·H₂O) and hydrotalcite (Mg₆Al₂(CO₃)(OH)₁₆·4H₂O) phases, was synthesized via precipitation, using ammonium bicarbonate as the precipitant. The precursor was characterized by differential thermal analysis/thermogravimetry, X-ray diffractometry, and scanning electron microscopy. Reactive spinel powder, which could be densified to translucency under vacuum at 1750°C in 2 h without additives, was obtained by calcining the precursor at 1100°C for 2 h.     

Preparation of Cu(In,Ga)(S,Se)2 thin films by sequential evaporation and annealing in sulfur atmosphere

Cu(In,Ga)(S,Se)₂ thin films with high Ga/III ratio (around 0.8) were prepared by sequential evaporation from CuGaSe₂, CuInSe₂, In₂Se₃ and Ga₂Se₃ compounds and then annealing in H₂S gas atmosphere. The annealing temperature was varied from 400 to 500 °C. These samples were characterized by means of XRF, EPMA, XRD and SEM. The S/(S+Se) mole ratio in the thin films increased with increase in the annealing temperature, keeping the Cu, In and Ga contents nearly constant. The open circuit voltage increased and the short circuit current density decreased with increase in the annealing temperature. The best solar cell using Cu(In,Ga)(S,Se)₂ thin film with Ga/(In+Ga)=0.79 and S/(S+Se)=0.11 annealed at 400 °C demonstrated V_oc=535 mV, I_sc=13.3 mA/cm², FF=0.61 and efficiency=4.34% without AR-coating.     

Novel composite electrolyte membranes consisting of fluorohydrogenate ionic liquid and polymers for the unhumidified intermediate temperature fuel cell

Novel composite electrolyte membranes consisting of [EMIm](FH)_nF (EMIm = 1-ethyl-3-methylimidazolium, n = 1.3 and 2.3) ionic liquids and fluorinated polymers were synthesized and their physical and electrochemical properties were measured under unhumidified conditions for their application to the intermediate temperature fuel cells. The ionic conductivities of composite membrane, P(VdF-co-HFP)/s-DFBP-HFDP/[EMIm](FH)_2.3F (1/0.3/1.75 in weight ratio), were 11.3 and 34.7 mS cm⁻¹ at 25 and 130 °C, respectively. The open circuit voltage (OCV) observed for the single cell using [EMIm](FH)_2.3F composite electrolyte was ∼1.0 V at 130 °C for over 5 h. The maximum power density of 20.2 mW cm⁻² was observed under the current of 60.1 mA cm⁻² at 120 °C. From the high thermal stability and high ionic conductivity, the fluorohydrogenate ionic liquid composite membranes are regarded as promising candidates for the electrolytes of the unhumidified intermediate temperature fuel cells.     

Synthesis and Photoluminescence of Eu2+-Doped α-Silicon Nitride Nanowires Coated with Thin BN Film

A feasible doping strategy is introduced to synthesize Eu²⁺-doped α-Si₃N₄ nanowires coated with a thin BN film. The nanowires were characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and a fluorescence spectrophotometer. The Eu²⁺-doped α-Si₃N₄ nanowires emitted strong yellow light, which is related to the 4 f ⁶5 d –4 f ⁷ transition of Eu²⁺, upon a broad excitation wavelength range between 250 and 450 nm. The obtained nanowires provided a potential candidate for application in optical nanodevices, as well as in white LEDs.     

Thermal and Electric Properties in Hot-Pressed ZrB2–MoSi2–SiC Composites

The thermal and electrical properties of MoSi₂ and/or SiC-containing ZrB₂-based composites and the effects of MoSi₂ and SiC contents were examined in hot-pressed ZrB₂–MoSi₂–SiC composites. The thermal conductivity and electrical conductivity of the ZrB₂–MoSi₂–SiC composites were measured at room temperature by a nanoflash technique and a current–voltage method, respectively. The results indicate that the thermal and electrical conductivities of ZrB₂–MoSi₂–SiC composites are dependent on the amount of MoSi₂ and SiC. The thermal conductivities observed for all of the compositions were more than 75 W·(m·K)⁻¹. A maximum conductivity of 97.55 W·(m·K)⁻¹ was measured for the 20 vol% MoSi₂-30 vol% SiC-containing ZrB₂ composite. On the other hand, the electrical conductivities observed for all of the compositions were in the range from 4.07 × 10–8.11 × 10 Ω⁻¹·cm⁻¹.