Asymmetric anionic polymerization of n-diphenyl-methylitaconimide with chiral ligand-organometal complex

Summary Asymmetric anionic polymerizations of achiral N-diphenylmethylitaconimide (DPII) were performed with chiral ligand — organometal complexes in toluene. The obtained poly(DPII)s exhibited molecular weights of 1.5 × 10³ to 6.3 × 10³ and specific rotation between +7.5 to −18.4° (THF). The chirality of polymer was significantly affected by the organometals and chiral ligands. The poly(DPII) obtained with (4S)-2,2′-(1-ethylpropylidene)bis(4-benzyl-4,5-dihydrooxazole) (Bnbox) / n-butyllithium (n-BuLi) exhibited the highest specific rotation (−18.4°). The optical activities of the poly(DPII)s were attributed to configurational chirality of the main chain more than conformational chirality, judged from NMR, circular dichroism (CD) and GPC analyses using UV and polarimetric detectors. Received: 10 January 2002/ Revised: 12 April 2002/ Accepted: 22 April 2002     

Direct observation of local strain field for ULSI devices

The in-depth profile of strain distribution from the silicon surface is one of the most important pieces of information for optimizing the device performance. The convergent-beam electron diffraction(CBED) method has been applied to analyze the local strain filed of the active regions for both test structure with the shallow trench isolation(STI) and the conventional LOCOS on a cross-sectional surface. As a result, strain distribution was observed successfully. It was found that the compressive stress exist all over the survey regions. The active region close to the bottom corner of the STI shows a larger stress than that of the conventional LOCOS. It is demonstrated that the CBED technique is very effective for the determination oflocal strain field in a small area of semiconductors and the optimizing of the STI structure andfabrication process.     

High density packaging technology ultra thin package & new tab package

As electronic devices become more highly integrated, the demand for small, high pin count packages has been increasing. We have developed two new types of IC packages in response to this demand. One is an ultra thin small outline package (TSOP) which has been reduced in size from the standard SOP and the other, which uses Tape Automated Bonding (TAB) technology, is a super thin, high pin count TAB in cap (T.I.C.) package. In this paper, we present these packages and their features along with the technologies used to improve package reliability and TAB. Thin packages are vulnerable to high humidity exposure, especially after heat shock.1 The following items were therefore investigated in order to improve humidity resistance: (1) The molding compound thermal stress, (2) Water absorption into the molding compound and its effect on package cracking during solder dipping, (3) Chip attach pad area and its affect on package cracking, (4) Adhesion between molding resin and chip attach pad and its affect on humidity resistance. With the improvements made as a result of these investigations, the reliability of the new thin packages is similar to that of the standard thicker plastic packages.     

Mesh-connected parallel computer PAX for scientific applications

Nearest-neighbor-mesh connection plus global broadcasting/control bus characterizes the architecture of the processor array PAX, that was constructed for and is now operating in many typical scientific applications. Not only these inter-processor connections, but also an MIMD structure of the machine were found effective in the particle transport problems, that require asynchronous operation.

The paper describes the bases of architecture of two recent versions of the PAX computer, their hardware and software systems, and, based on the implementation of scientific applications, the effectiveness of the PAX type architecture is presented.     

Formation Process of Super-Water-Repellent Al2O3 Coating Films with High Transparency by the Sol–Gel Method

Alumina thin films with a roughness of 20 to 50 nm were formed by immersing porous alumina gel films prepared by the sol-gel method in boiling water. When hydrolyzed fluoroalkyltrimethoxysilane was coated on the alumina films, the contact angle for water was increased with an increase of immersion time, and immersion for 30 s was long enough to give super-water-repellency and high transparency; the contact angle for water of the film was 165° and the transmittance for the visible light was higher than 92%. It was found that the surface of the alumina gel films immersed in boiling water consisted of boehmite crystals. It was shown that the existence of air in the hydrophobic pores on the surface caused the super-water-repellency.     

Effect of filler surface treatment on the properties of recycled high‐density polyethylene/(natural rubber)/(Kenaf powder) biocomposites

Biocomposites were prepared from a kenaf core powder and recycled high‐density polyethylene/(natural rubber) blend by using an internal mixer at 165^oC and 50 rpm. The effect of the filler content and the filler surface treatment was studied. Chemical modification of kenaf filler was performed with alkali pretreatment followed by treatment with silane. Scanning electron microscopy and infrared spectroscopy studies confirmed changes in the chemical compositions and structural characteristics induced through the modification. It was found that treated biocomposites offered higher tensile strength and tensile modulus, but lower elongation at break compared with untreated biocomposites. Lower water absorption and higher thermal stability of the resultant biocomposites were also obtained when treated fillers were used. J. VINYL ADDIT. TECHNOL., 20:218–224, 2014. © 2014 Society of Plastics Engineers     

Analysis of energy service systems in urban areas and their CO2 mitigations and economic impacts

Three kinds of energy service system were examined as alternative energy systems in urban areas. A comparison of these energy systems was performed by finding Pareto optimum solutions for a multi-objective model. The model had two objective functions: CO₂ emission and cost to consumer. Various energy pricings were provided in the model as variables.     

l-Ascorbic acid as an alternative fuel for direct oxidation fuel cells

l-Ascorbic acid (AA) was directly supplied to polymer electrolyte fuel cells (PEFCs) as an alternative fuel. Only dehydroascorbic acid (DHAA) was detected as a product released by the electrochemical oxidation of AA via a two-electron transfer process regardless of the anode catalyst used. The ionomer in the anode may inhibit the mass transfer of AA to the reaction sites by electrostatic repulsion. In addition, polymer resins without an ionic group such as poly(vinylidene fluoride) and poly(vinyl butyral) were also useful for reducing the contact resistance between Nafion membrane and carbon black used as an anode, although an ionomer like Nafion is needed for typical PEFCs. A reaction mechanism at the two-phase boundaries between AA and carbon black was proposed for the anode structure of DAAFCs, since lack of the proton conductivity was compensated by AA. There was too little crossover of AA through a Nafion membrane to cause a serious technical problem. The best performance (maximum power density of 16 mW cm⁻²) was attained with a Vulcan XC72 anode that included 5 wt.% Nafion at room temperature, which was about one-third of that for a DMFC with a PtRu anode.     

Study on the Effects of Flow in the Volute Casing on the Performance of a Sirocco Fan

The flow at the exit from the runner blade of a centrifugal fan with forward curved blades (a sirocco fan) sometimes separates and becomes unstable. We have conducted many researches on the impeller shape of a sirocco fan, proper inlet and exit blade angles were considered to obtain optimum performance. In this paper, the casing shape were decided by changing the circumferential angle, magnifying angle and the width, 21 sorts of casings were used. Performance tests, inner flow velocity and pressure distributions were measured as well. Computational fluid dynamic calculations were also made and compared with the experimental results. Finally, the most suitable casing shape for best performance is considered.