A multi-spectral non-local method for retrieval of boundary layer cloud properties from optical remote sensing data

A multi-spectral non-local (MSN) method is developed for advanced retrieval of boundary layer cloud properties from remote sensing data, as an alternative to the independent pixel approximation (IPA) method. The non-local method uses data at both the target pixel and neighboring pixels to retrieve cloud properties such as pixel-averaged cloud optical thickness and effective droplet radius. Radiance data to be observed from space were simulated by a three-dimensional (3D) radiation model and a stochastic boundary layer cloud model with two-dimensional (horizontal and vertical) variability in cloud liquid water and effective radius. An adiabatic assumption is used for each cloud column to model the geometrical thickness and vertical profiles of cloud liquid water content and effective droplet radius, neglecting drizzle and cloud brokenness for simplicity. The dependence of radiative smoothing and roughening on horizontal scale, optical thickness and single scattering albedo are investigated. Then, retrieval methods using 250-m horizontal resolution data onboard new generation satellites are discussed. The regression model for the MSN method was trained based on datasets from numerical simulations. The training was performed with respect to various domain averages of optical thickness and effective radius, because smoothing and roughening effects are strongly dependent on the two variables. Retrieval accuracy is discussed here with datasets independent of those used in the training, towards assessing the generality of the technique. It is demonstrated that retrieval accuracy of cloud optical thickness, which is often retrieved from single-spectral visible-wavelength data, is improved the most using neighboring pixel data and secondly using multi-spectral data, and ideally with both. When the IPA retrieval method is applied to optical thickness and effective radius, the root-mean-square relative errors can be 15-90%, depending on solar and view directions. In contrast, the MSN method has errors of 4-10%, which is smaller than IPA by a factor of 2-10. It is also suggested that the accuracy of the MSN method is insensitive to some assumptions in the inhomogeneous cloud input data used to train the regression model.     

Effects of polyglycerol esters of fatty acids and ethylene‐vinyl acetate co‐polymer on crystallization behavior of biodiesel

Biodiesel fuels (BDF) have many problems in the cold due to their crystallization properties. In particular, precipitation of large crystals of high‐melting fractions in BDF at low temperatures remarkably changes cold flow property of BDF and, thereby, it increases the values of cold filter plugging point. In this study, we evaluated polyglycerol esters of fatty acids (PGE) and ethylene‐vinyl acetate co‐polymer (EVA) as chemical additives to improve the cold flow property of palm oil‐based FAME (PFME). The results of solid fat content measurement indicate that the simultaneous addition of PGE and EVA showed synergistic effects on suppression of crystallization of PFME, however such effect was not observed when EVA was used alone. DSC thermograms indicated that the PGE additives not only decreased the crystallization temperature but also kinetically suppressed the crystal growth. Polarized light microscopy showed that the simultaneous addition of PGE and EVA led to the formation of considerably small and fine‐dispersed crystals of PFME. These results indicate that combined effects of PGE and EVA caused the formation of fine‐dispersed PFME crystals, which could improve the viscous properties of palm oil‐based BDF at relatively cold temperatures.     

Magnesium interlayered diamond coating on silicon

Diamond thin films have been deposited using hot filament chemical vapour deposition technique on manually scratched p-Si(1 0 0) substrate, with and without magnesium interlayer. In spite of magnesium melting point being lower (T_m = 649 °C) than the growth temperature of the substrate (T_s  750 °C) used in these experiments, it was found that high quality diamond films could be grown on Mg covered substrate. A liquid substrate is probably generated during the diamond film growth. Raman spectroscopy analysis exhibited only the triply degenerate, zone centre optical phonon peak at 1333 cm⁻¹ indicating that nearly stress free crystallites were present. Broadening of the Raman peak (11.76 cm⁻¹) indicates that some small crystallites also are present. Scanning electron and atomic force microscopy accompanied by X-ray diffraction analysis where used to compare the details of diamond film growth directly on scratched Si(1 0 0) and Mg interlayered scratched Si(1 0 0) substrates.     

Future prospect of remote Cat-CVD on the basis of the production, transportation and detection of H atoms

The future prospect of remote Cat-CVD, in which the decomposition and the deposition chambers are separated, is discussed on the basis of the absolute density measurements of H atoms. It is now well recognized that uniform deposition is possible on a large area without plasma damages by Cat-CVD. However, we may not overlook the demerits in Cat-CVD. One of the demerits is the poisoning of the catalyzer surfaces by the material gases, both temporary and permanent. One technique to overcome this problem is remote Cat-CVD. The question is how to separate the decomposition and deposition areas. If the separation is not enough, there should be back diffusion of the material gases, which will poison the catalyzers. If the separation is too tight, radicals may not effuse out from the decomposition chamber. These problems are discussed and it is shown that SiO₂ coating to reduce the radical recombination rates on walls is promising. The possibility of the polytetrafluoroethene coating by Cat-CVD is also discussed.     

Difference in the detection limits of flaws in the depths of multi-layered and continuous aluminum plates using low-frequency eddy current testing

We examined the difference in the detection limits of flaws in the depths of multi-layered and continuous aluminum plates using low-frequency eddy current testing. The detection limits were measured by using a magneto-resistive sensor. Comparing the frequency of an applied magnetic field, the detection limit at 50 Hz is deeper than that at 1 kHz. Comparing the sample structure, the detection limit in the multi-layered samples is deeper than that in the continuous samples. These results are likely due to the differences in the skin depth and conductivity of the sample.     

Effect of annealing on d.c. conductivity of V2O5-SnO-TeO2 glasses

The d.c. conductivity (σ) of V₂O₅-SnO-TeO₂ glasses prepared by the press-quenching method was studied at temperatures from room temperature (RT) to 473 K, and the effect of annealing on σ was investigated. The conductivity of 50V₂O₅·20SnO·30TeO₂ glass was determined to be 3.98×10⁻⁴ Scm⁻¹ at 473 K and was unchanged for annealing (6–48 h) at 493 K, lower than T_g = 501 K, while its density increased with annealing time. These glasses were found to be n-type semiconductors, and the conduction was confirmed to be due to adiabatic small polaron hopping for V₂O₅ ≧ 50 mol%, and non-adiabatic for V₂O₅ < 50 mol%. The activation energy for conduction, W, decreased with annealing time. Variations in oxygen molar volume of the glasses with annealing time inferred a change in glass structure, from loosely to closely packed, resulting in a decrease in vanadium ion spacing with annealing. This caused an increase in the polaron band width, producing a decrease in polaron hopping energy and W. The effect of annealing time on the density of 50V₂O₅·20SnO·30TeO₂ glass was explained adequately by Winter's formula.     

Basic study on neutronics of future neutron source based on accelerator driven subcritical reactor concept in Kyoto University Research Reactor Institute (KURRI)

A basic study on the nuclear characteristics in the accelerator driven subcritical reactor (ADSR) was performed through a series of neutronics design calculations and reactor physics experiments. Calculations were executed mainly by the MCNPX code, and experiments were performed at the Kyoto University Critical Assembly (KUCA). Some nuclear features of the research reactor type ADSR were revealed through the present study. The following facts were found: 1) Further studies are necessary concerning the nuclear data in the high energy region and the generated neutrons through the spallation reactions especially by the light nuclei and the lower energy protons. 2) The adjustment of subcriticality by the control rod significantly affects the reactor power of ADSR because of the distortion in the neutron flux distribution caused by the control rod insertion. 3) An accurate calculation is essential to evaluate the neutron multiplication in the ADSR. 4) The neutronics behavior after a pulse injection can be approximately simulated by the calculation.     

Synthesis of l-theanine using enzyme/mesoporous silica conjugates under high pH conditions

We present a new enzymatic process for synthesis of l-theanine using glutaminase combined with immobilization technique on a mesoporous silica (MPS). The MPS was firstly attempted to modify with zirconia in order to enhance the durability against the reaction under high pH conditions. The glutaminase on the MPS successfully catalyzed the reaction for the synthesis of l-theanine. The glutaminase/MPS conjugate was subsequently recovered and employed for the reaction again. The conjugate showed the corresponding activity to the first synthesis. This indicates that the conjugate functions as a catalyst for synthesis of l-theanine, having the operational stability sufficient for reuse.     

Detection of surface antigens on living cells through incorporation of immunorecognition into the distinct positioning of cells with positive and negative dielectrophoresis

Rapid determination of surface antigens on cells is possible by immobilization of cells accumulated by positive dielectrophoresis (p-DEP) via effective surface immunoreactions and removal of unbound cells by negative DEP (n-DEP). The DEP device for cell manipulation comprises a microfluidic channel with an upper indium tin oxide (ITO) electrode and a lower ITO microband array electrode (band electrode) modified with an antibody. Cells with the surface antigen introduced into the channel immediately accumulated on the surface of the band electrode during p-DEP generated by the application of ac voltage between the ITO electrode and the band electrode to immobilize by the specific antibody. The removal of accumulated cells to the gap region during n-DEP was used for rapid estimation of the residual cells with a specific surface antigen. We demonstrate here that human promyelocytic leukemia cells with the surface antigen CD33 can be captured on a band electrode modified with anti-CD33 antibody. The time required for the determination of the surface antigen using this compelled accumulation of cells by p-DEP and the separation of unbound cells by n-DEP is decreased to 60 s compared to that required by a cell binding assay using microtiter plates (30 min). Furthermore, the present method for a novel cell binding assay does not require pretreatment such as target labeling or washing of unbound cells and thereby enhancing throughput in the clinic and in cytobiology studies.     

Evaluation of the Fatigue Characteristics of Laser-processed Hot Work Tool Steel Based on Reliability

It is reported that laser-processing is effective to repair the heat checks, which are fine shallow cracks on a surfaceof die-casting dies.