Technological strategies to improve photostability of a sunscreen agent

Due to the reduction of the ozone layer, there is an increasing need of effective UV protection systems with minimized side-effects. Trans-2-ethylhexyl- p -methoxycinnamate ( trans -EHMC) represents one of the most widely used sunscreen compound. Several studies demonstrated that trans -EHMC is unstable following UV irradiation both in solution and in emulsion formulations. Moreover, various reports of photocontact sensitization induced by trans -EHMC have appeared in the literature. Consequently, in order to ensure adequate efficacy and safety for this sunscreen agent, there is a need for new carrier systems to enhance trans -EHMC photostability. In the present study the photostability of the filter in different formulation types (emulsion–gel, gel and emulsion) with various ingredients is evaluated. In addition, nanoparticles based on poly- D , L -lactide-co-glycolide (PLGA) as carrier for trans -EHMC are investigated. The influence of nanoparticle matrix on the photochemical stability of the sunscreen agent is also presented. The results obtained demonstrated that PLGA nanoparticles are effective in reducing the light-induced degradation of the sunscreen agent. Moreover, the choice of formulation type and the excipients used play an important role in order to obtain a stable cosmetic product containing trans -EHMC.     

Advances in speech transcription at IBM under the DARPA EARS program

This paper describes the technical and system building advances made in IBM's speech recognition technology over the course of the Defense Advanced Research Projects Agency (DARPA) Effective Affordable Reusable Speech-to-Text (EARS) program. At a technical level, these advances include the development of a new form of feature-based minimum phone error training (fMPE), the use of large-scale discriminatively trained full-covariance Gaussian models, the use of septaphone acoustic context in static decoding graphs, and improvements in basic decoding algorithms. At a system building level, the advances include a system architecture based on cross-adaptation and the incorporation of 2100 h of training data in every system component. We present results on English conversational telephony test data from the 2003 and 2004 NIST evaluations. The combination of technical advances and an order of magnitude more training data in 2004 reduced the error rate on the 2003 test set by approximately 21% relative-from 20.4% to 16.1%-over the most accurate system in the 2003 evaluation and produced the most accurate results on the 2004 test sets in every speed category.     

Climate change gains more from nuclear substitution than from conservation

We show the massive reduction achievable, in both emissions and climate change impact, from enhanced nuclear energy use on the forecasts of future world energy use and its associated environmental impacts. A range encompassing the major scenarios for the World's energy demand have been analyzed using the latest version of the climate-modeling MAGICC/SCENGEN software (Version 4.1). We have updated and predicted the impacts of 80% substitution with CO₂-free sources (likely predominantly nuclear) for coal-fired electricity (by 2030) and for transportation fuel (by 2040). For transportation, hydrogen produced by CO₂-free sources would replace gasoline and diesel fuels. In this paper, to bracket the range of futures, we simply focus on two scenarios from the Intergovernmental Panel on Climate Change's (IPCC), one (A1FI) that is energy-profligate and one (B2) that is energy-conserving.The results show that, interestingly, projected average global temperatures for all scenarios are fairly similar until about 2035 (a further rise beyond the 1990 average temperature of +0.75 ± 0.1 K) regardless of energy usage and its sources. However, by 2050, the different IPCC scenarios diverge markedly. Understandably, A1FI is projected to have noticeably stronger effects than B2 on average global temperatures (about 0.3 K more in 2050) but the effect is much stronger over land at mid and high latitudes (up to almost 1 K more). What is most striking is that the substitution of CO₂-free sources gives projected average temperature rises in 2050 over key land areas (North America and China) that are very similar for the two energy-use scenarios—typically 1–1.5 K because A1FI's additional energy is predominantly supplied by nuclear. In contrast, projected rises with the unaltered cases are markedly different being about 2.5 K for A1FI and 1.5–2 K for B2. The projected changes in rainfall distribution show similar patterns, especially for the expected increases in higher latitudes.With the assumption of no additional policies for substitution of energy sources beyond 2040, temperature divergence between the two scenarios of relative energy profligacy or conservation grows in the latter half of the 21st century, even with substitution. However, the early substitution of nuclear energy and hydrogen appears to buy time and is not crucially dependent on severe, near-term curtailment of energy use. Near-term curtailment is too difficult to implement at a time of rapid industrialization of major emerging economies. Of course, proportionately larger deployments of CO₂-free energy sources are needed for more energy-intensive scenarios.Nuclear power must dominate as the source of CO₂-free energy since it is proven, dependable, available on a large scale, and economic. Social objections to nuclear energy in some countries and quarters are seen as well-meaning but misguided distractions from solving the energy and environmental crises that are now facing world sustainability. The time for real technical, social and political action is now.     

The prediction of solute transport in surcharged manholes using CFD.

Solute transport processes occur within a wide range of water engineering structures, and urban drainage engineers increasingly rely on modelling tools to represent the transport of dissolved materials. The models take as input representative travel time and dispersion characteristics for key system components, and these generally have to be identified via field or laboratory measurements. Computational Fluid Dynamics (CFD) has the potential to reveal the underlying hydraulic processes that control solute transport, and to provide a generic means of identifying relevant parameter values. This paper reports on a study that has been undertaken to evaluate the feasibility of utilising a CFD-based approach to modelling solute transport. Discrete phase modelling has been adopted, as this is computationally efficient and robust when compared with the time-dependent solution of the advection-dispersion equation. Simulation results are compared with published laboratory data characterising the dispersion effects of surcharged manholes, focusing specifically on an 800 mm diameter laboratory manhole for a flowrate of 0.002 m(3)/s and a range of surcharge depths. Preliminary indications are that the CFD results adequately replicate the measured downstream temporal concentration profiles, and that a threshold surcharge depth, corresponding to a change in hydraulic regime within the manhole, can also be identified.     

Measurement of the relative reduction of strip on the 1200-model temper-rolling mills in flat-rolled products shop No. 3

The temper-rolling mills in flat-rolled products shop No. 3 at the MMK has been equipped with the Vytyazhka automated system to measure the elongation of strip (ASEMS) rolled on the mill. The elongation (relative elongation) of the strip is determined through a frequency-based method of measuring the speed of the strip before and after reduction. The system transmits and displays information on the temper-rolling of each coil. The information is shown as a diagram on the monitor of an industrial computer. The reliability of the system allows it to be in continuous use. Introduction of the automated elongation measurement system makes it possible to monitor the reductions being made during temperrolling, which in turn enables the shop to reduce the number of products having properties that do not meet customers’ requirements. __________ Translated from Metallurg, No. 1, pp. 62–63, January, 2007.     

Scrap metal: The problem of its shortage and efficient use

The most important element of manufacturing processes that employ new metallurgical technologies is improving the quality of the scrap metal used in the given process. Introducing modern scrap-processing equipment is especially important in this regard. At the same time, it is also necessary to use the latest technological advances in order to reduce the oxidation loss of iron during refining in arc steelmaking furnaces.     

New technological solutions to protect the lining of blast-furnace hearths

The use of schungite as a partial replacement for coke is practiced in Russia at a number of metallurgical plants, both in the production of foundry iron (its primary use) and in making conversion pig iron. The largest amount of coke is replaced when foundry iron is being made, the replacement coefficient in this case having a value within the range 0.8–1.3. Studies that included continuous monitoring of the temperature of the carbon blocks in blast furnaces with volumes of 1719, 3200, and 5580 m³ unambiguously demonstrate that the thickness of the slag crust in blast furnaces increases with the use of schungite. Protecting the lining of the hearth through the use of schungite is also accompanied by a decrease in coke consumption. __________ Translated from Metallurg, No. 8, pp. 53–57, August, 2007.