Calcium stimulates intramitochondrial cholesterol transfer in bovine adrenal glomerulosa cells

In adrenal glomerulosa cells, angiotensin II (Ang II) stimulates aldosterone synthesis through rises of cytosolic calcium ([Ca2+]c). The rate-limiting step in this process is the transfer of cholesterol to the inner mitochondrial membrane, where it is converted to pregnenolone by the P450 side chain cleavage enzyme. The aim of the present study was to examine the effect of changes in [Ca2+]c and of Ang II on intramitochondrial cholesterol distribution. Freshly prepared bovine zona glomerulosa cells were submitted to a cytosolic Ca2+ clamp (600 nM) or stimulated with Ang II (10 nM). Mitochondria were isolated and subfractionated into outer membranes (OM), inner membranes (IM), and contact sites (CS). Cholesterol content was determined by the cholesterol oxidase assay. Stimulation of intact cells with Ca2+ led to a marked decrease in cholesterol content of OM (to 54 +/- 24% of controls, n = 5) and to a concomitant increase of cholesterol in CS and IM (to 145 +/- 14%, n = 5). When glomerulosa cells were exposed to Ang II, a marked increase of cholesterol in CS occurred (to 172 +/- 16% of controls, n = 5). No significant changes were detected in OM cholesterol, suggesting a stimulation of cholesterol supply to the mitochondria in response to Ang II. Cycloheximide specifically and significantly reduced Ca2+-activated cholesterol transfer to CS and IM. In conclusion, our data indicate that one of the main functions of the Ca2+ messenger is to increase cholesterol supply to the P450 side chain cleavage enzyme by enhancing endogenous intermembrane cholesterol transfer to a mitochondrial site containing the enzymes responsible for the initial steps of the steroidogenic cascade.     

SURFACE TENSION AND BUOYANCY DRIVEN INSTABILITIES IN A LAYER OF LIQUID TIN HEATED FROM BELOW

The linear theory of Pearson (1958) and Nield (1964) is modified here to study liquid tin and include the finite thermal resistances of the bounding layers of boron nitride, copper and air (∼10^-2 torr) in the experiments of Ginde et al. (1989). The magnitude of the ΔT_c across the layer of liquid tin required for the onset of convection depends on the ratios of the thermal conductivities and thicknesses of the supporting layers of boron nitride and copper to those of the tin.

According to our theory surface tension contributes more than buoyancy to the instability observed experimentally. The critical ΔT_c observed required for the onset of convection in the layer of tin, is up to 25% lower than that predicted, which shows the layer is less stable than the theory indicates. Thus the surface of the tin was uncontaminated, or a significantly larger observed critical ΔT_c would be expected.

The boundary condition on the thermal fluctuations at the base of the supporting layer of copper does not appear to be important in these experiments. However, the thermal resistance of the boron nitride would have to be assumed to be unrealistically large to obtain agreement within experimental error with the theory.     

Crystallization mechanism and characteristics of silicomanganese slag melts used to make glass ceramics (Review)

Translated from Steklo i Keramica, No. 3, pp. 2–5, March, 1993.     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

A process for debismuthizing lead with magnesium

Significant amounts of bismuth can be removed from magnesium-lead alloys by crystallization of the intermetallic compounds Mg_{0. 6573}Pb_{0. 3427} and Mg_0.662Pb_0.338in the Mg₂Pb, magnesium plumbide phase field of the Pb-Mg-Bi system. The results of the previous studies have been used to develop a process for debismuthizing lead using controlled conditions for the crystallization of magnesium plumbide from alloys containing 0.03 to 0.06 wt Pct bismuth and magnesium whose concentration is determined by the relationship wt Pct Mg = 2.9 + 20 x wt Pct Bi. A flow diagram showing the sequence of operations is presented together with a material balance, which was established from data obtained from individual experiments simulating the previously mentioned unit operations, with a final product containing less than 0.0010 wt Pct Bi. The process also includes the recycling of magnesium recovered by vacuum distillation. Additional procedures are included to extend the process to treat alloys containing up to 1.5 wt pct bismuth.     

Oxidation of boron silicide and materials based on it

Boron silicide and compounds based on it containing titanium, chromium, nickel, and yttrium and scandium oxides are studied for their oxidation in air from room temperature to 1300°C. It is shown that chromium boride markedly improves the heat resistance of B₄Si over a wide temperature range (700–1300°C) probably as a result chromium-oxide dissolution in borosilicate glass and alteration of its structure. A favorable effect of yttrium and scandium oxides as well of nickel silicide appears at above 100°C as a result of forming complex oxide compounds in the scale.     

Clinical associations of prenatal ischaemic white matter injury

Neuropathological examinations were carried out at necropsy on 274 cases of intrauterine death or neonatal death at or before three days after birth. Fifty six (20.4%) subjects had evidence of prenatal ischaemic brain damage. On review of the maternal case notes to ascertain antenatal clinical associations there was an increased incidence of intrauterine growth retardation, either based on birth weight for gestational age (odds ratio (OR) 2.0; 95% confidence interval (CI) 1.1 to 3.7) or diagnosed antenatally (OR 2.7; 95% CI 1.3 to 5.6). Oligohydramnios was also more common (OR 2.9; 95% CI 1.2 to 7.0). The association of intrauterine growth retardation and white matter damage remained after excluding fetuses with a major congenital anomaly (OR 2.4; 95% CI 1.1 to 5.1). The findings suggest that chronic intrauterine hypoxia may be associated with damage to cerebral white matter among fetuses and infants who die. The relation between ischaemic white matter damage and cerebral palsy among survivors remains speculative.