On the stabilization of discrete system zeros

The stabilization of discrete system zeros is commonly achieved by allowing the input pattern to deviate from zero-order hold (ZOH). In this paper, we show that this design technique may not be practical at small sampling times when the continuous system has unstable zero(s). Deviation of the input pattern from ZOH may also cause undesirable fluctuation in the inter-sampling-time output. In order to reduce this effect, we present a method which uses linear quadratic optimization for the determination of suitable zero locations.     

A fault tolerant control framework for periodic switched non-linear systems

An observer-based fault tolerant control (FTC) framework is proposed for a class of periodic switched non-linear systems (PSNS) without full state measurements. Two kinds of faults are considered: continuous faults that affect each mode during its dwell period; and discrete faults that affect the switching sequence. Under the average dwell time scheme, the proposed FTC framework can maintain the stability of overall PSNS in spite of these two kinds of fault. A switched reluctance motor example is taken to illustrate the efficiency of the proposed method.     

Enrichment of (8,4) Single‐Walled Carbon Nanotubes Through Coextraction with Heparin

Heparin sodium salt is investigated as a dispersant for dispersing single‐walled carbon nanotubes (SWNTs). Photoluminescence excitation (PLE) spectroscopy is used for identification and abundance estimation of the chiral species. It is found that heparin sodium salt preferentially disperses larger‐diameter Hipco SWNTs. When used to disperse CoMoCAT nanotube samples, heparin has a strong preference for (8,4) tubes, which have larger diameter than the predominant (6,5) in pristine CoMoCAT samples. PLE intensity due to (8,4) tubes increases from 7% to 60% of the total after threefold extractions. Computer modeling verifies that the complex of (8,4) SWNTs and heparin has the lowest binding energy amongst the four semiconducting species present in CoMoCAT. Network field‐effect transistors are successfully made with CoMoCAT/heparin and CoMoCAT/sodium dodecylbenzene sulfonate (SDBS)–heparin (x3), confirming the easy removability of heparin.     

Understanding massively multiplayer online role‐playing game addiction: A hedonic management perspective

Massively multiplayer online role‐playing game (MMORPG) addiction presents a serious issue worldwide and has attracted increasing attention from academic and other public communities. This article addresses this critical issue and fills research gaps by proposing and testing a research model of MMORPG addiction. Building on the conceptual foundation of the hedonic management model of addiction and the technology affordance perspective, we develop a research model explaining how MMORPG affordances (ie, achievement, social and immersion affordances) are associated with the duality of hedonic effects (ie, perceived positive mood enhancement and perceived negative mood reduction) and the extent of MMORPG addiction. Using structural equation modelling, we empirically test our research model with 406 MMORPG players. The results show that both perceived positive mood enhancement and perceived negative mood reduction positively correlate with the extent of MMORPG addiction. Furthermore, achievement and immersion affordances are positively associated with the duality of hedonic effects, whereas social affordance is not. Our study contributes to the growing body of technology addiction literature by revealing the relationships between the two hedonic effects and the extent of MMORPG addiction, and by offering a contextualised explanation of the role of MMORPG affordances in these relationships. We offer an alternative perspective on the far‐reaching, unintended relationships between technological affordances and addictive technology use. Our study provides game developers and policymakers with insights into preventing MMORPG addiction to create an entertaining, healthy virtual playground.     

多源遥感数据小麦识别及长势监测比较研究

小麦是我国主要的农作物之一,对于我国的经济发展有着重要意义.遥感技术经过不断发展,已成为提取小麦及长势研究的重要手段.利用高光谱珠海一号OHS-2A卫星、多光谱Sentinel-2A卫星以及MODIS等多源遥感数据,以雄安为研究区,采用支持向量机的方法进行小麦提取,结合野外实测数据利用混淆矩阵进行精度评价分析;分别对比...     

Packing spherical discrete elements for large scale simulations

We introduce a new geometric method to generate sphere packings with restricted overlap values. Sample generation is an important, but time-consuming, step that precedes a calculation performed with the discrete element method (DEM). At present, there does not exist any software dedicated to DEM which would be similar to the mesh software that exists for finite element methods (FEM). A practical objective of the method is to build very large sphere packings (several hundreds of thousands) in a few minutes instead of several days as the current dynamic methods do. The developed algorithm uses a new geometric procedure to position very efficiently the polydisperse spheres in a tetrahedral mesh. The algorithm, implemented into YADE-OPEN DEM (open-source software), consists in filling tetrahedral meshes with spheres. In addition to the features of the tetrahedral mesh, the input parameters are the minimum and maximum radii (or their size ratio), and the magnitude of authorized overlaps. The filling procedure is stopped when a target solid fraction or number of spheres is reached. Based on this method, an efficient tool can be designed for DEMs used by researchers and engineers. The generated packings can be isotropic and the number of contacts per sphere is very high due to its geometric procedure. In this paper, different properties of the generated packings are characterized and examples from real industrial problems are presented to show how this method can be used. The current C++ version of this packing algorithm is part of YADE-OPEN DEM [20] available on the web (https://yade-dem.org).     

Ambient-pressure thermogravimetric characterization of four different coals and their chars

Ambient-pressure thermogravimetric characterization of four different coals and their chars was performed to obtain fundamental information on pyrolysis and coal and char reactivity for these materials. Using a Perkin-Elmer TGS-1 thermobalance, weight loss as a function of temperature was systematically determined for each coal heated in helium at 40 and 160 °C/min under various experimental conditions, and for its derived char heated in air over a temperature range of 20 to 1000 °C. The results indicate that the temperature of maximum rate of devolatilization increases with increasing heating rate for all four coals. However, heating rate does not have a significant effect on the ultimate yield of total volatiles upon heating in helium to 1000 °C; furthermore, coupled with previous data⁹ for identical coal samples, this conclusion extends over a wide range of heating rate from 0.7 to 1.5 × 10⁴ °C/s. Using the temperature of maximum rate of devolatilization as an indication of relative reactivity, the devolatilization reactivity differences among the four coals tested that were suggested by this criterion are not large. For combustion in air, the overall coal/char reactivity sequence as determined by comparison of sample ignition temperature is: N. Dakota lignite coal ≈ Montana lignite coal > North Dakota lignite char > III. No. 6 bituminous coal ≈ Pittsburgh Seam bituminous coal > Montana lignite char > III. No. 6 bituminous char > Pittsburgh Seam bituminous char. The reactivity differences are significantly larger than those for devolatilization. The reactivity results obtained suggest that coal type appears to be the most important determinant of coal and char reactivity in air. The weight loss data were fitted to a distributed-activation-energy model for coal pyrolysis; the kinetic parameters so computed are consistent with the view that coal pyrolysis involves numerous parallel first-order organic decomposition reactions.     

Dynamic Connectivity for Axis-Parallel Rectangles

In this paper we give a fully dynamic data structure to maintain the connectivity of the intersection graph of n axis-parallel rectangles. The amortized update time (insertion and deletion of rectangles) is and the query time (deciding whether two given rectangles are connected) is O(1). It slightly improves the update time (O(n ^0.94)) of the previous method while drastically reducing the query time (near O(n ^1/3)). In addition, our method does not use fast matrix multiplication results and supports a wider range of queries. This work has been supported by an NSERC grant.     

Computational aspects of the expected differential probability of 4-round AES and AES-like ciphers

In this paper we study the security of the Advanced Encryption Standard (AES) and AES-like block ciphers against differential cryptanalysis. Differential cryptanalysis is one of the most powerful methods for analyzing the security of block ciphers. Even though no formal proofs for the security of AES against differential cryptanalysis have been provided to date, some attempts to compute the maximum expected differential probability (MEDP) for two and four rounds of AES have been presented recently. In this paper, we will improve upon existing approaches in order to derive better bounds on the EDP for two and four rounds of AES based on a slightly simplified S-box. More precisely, we are able to provide the complete distribution of the EDP for two rounds of this AES variant with five active S-boxes and methods to improve the estimates for the EDP in the case of six active S-boxes.     

Direct measurement of oxygen in lead-based ceramics using the ζ-factor method in an analytical electron microscope

X-ray absorption of oxygen is significant in thin specimens of Pb(Mg_1/3Nb_2/3)O₃-35 mol% PbTiO₃ [PMN-35PT] due to the presence of heavy elements such as Pb and Nb. Therefore, direct measurement of the oxygen concentration in these types of systems can be difficult. Furthermore, assumption of the composition from stoichiometric considerations may not be feasible, particularly if the valence state of one or more of the cation species is variable. Using only XEDS data, the -factor method provides absorption corrected compositional information. In the present study, it was shown that such data were in very good agreement with the nominal values for PMN-35 PT, whereas the uncorrected data underestimated the oxygen content by 300%. In previous work, it was theorized that the swelling of samples containing excess PbO was linked to changes in the composition of the intergranular liquid phase. The -factor technique was used to show that the oxygen to lead ratio of this second phase changes upon annealing.