SIW Corporate-Feed Network for Circular Polarization Slot Array Antenna

Wireless Personal Communications - In this paper, multilayer feeding network for linear slot array antenna is studied. A substrate integrated waveguide (SIW) corporate-feed network for linear slot...     

A partial-SOI LDMOSFET with triangular buried-oxide for breakdown voltage improvement

In this paper, a near-triangular buried-oxide partial silicon-on-insulator (TB-PSOI) lateral double-diffused MOS field-effect transistor is proposed. The electric field and electrostatic potential in this structure are modified by the gradual buried-oxide thickness increase. The modification includes the addition of a new peak in the electric field in comparison to that of the conventional PSOI. To assess the efficiency of the proposed structure, its breakdown voltage is compared with that of conventional PSOI using two-dimensional simulations. A comparative study is performed in terms of silicon-film and buried-oxide layer thicknesses, drift region and buried-oxide layer lengths, and drift region doping concentrations. The study shows that under the same drain current, the breakdown voltage of TB-PSOI is nearly two times higher than its PSOI counterpart (108% improvement). Simulation results show that the three-stepped oxide layer closely follows the TB-PSOI structure with a breakdown voltage improvement of 96% compared to that of the PSOI structure.     

A comparison between reliability analyses based primarily on disjointness or statistical independence: The case of the generalized indra network

A switching expression is readily convertible to a reliability expression if (a) all ORed terms are disjoint, and (b) all ANDed sums are statistically independent. The usual approach of system reliability analysis makes a primary use of (a) and a secondary use of (b). An alternative approach reverses the roles of (a) and (b). Symbolic reliability expressions for the source-to-terminal reliability of a generalized Indra network (GIN) with nonidentical components are derived by the two approaches. For this particular case, the second approach leads to a shorter, more elegant derivation and simpler novel results. Typical plots of the GIN reliability functions are presented and their properties are discussed.     

Generalized carrier to interference ratio analysis for shotgun cellular systems in multiple dimensions over composite Rayleigh–Lognormal (Suzuki) fading

Telecommunication Systems - This paper analyzes the carrier-to-interference ratio (CIR) of the so-called shotgun cellular systems (SCSs) in $$\tau $$ dimensions ( $$\tau =1, 2,$$ and 3). SCSs are...     

An optimal energy‐efficient clustering method in wireless sensor networks using multi‐objective genetic algorithm

In this study, an optimal method of clustering homogeneous wireless sensor networks using a multi‐objective two‐nested genetic algorithm is presented. The top level algorithm is a multi‐objective genetic algorithm (GA) whose goal is to obtain clustering schemes in which the network lifetime is optimized for different delay values. The low level GA is used in each cluster in order to get the most efficient topology for data transmission from sensor nodes to the cluster head. The presented clustering method is not restrictive, whereas existing intelligent clustering methods impose certain conditions such as performing two‐tiered clustering. A random deployed model is used to demonstrate the efficiency of the proposed algorithm. In addition, a comparison is made between the presented algorithm other GA‐based clustering methods and the Low Energy Adaptive Clustering Hierarchy protocol. The results obtained indicate that using the proposed method, the network's lifetime would be extended much more than it would be when using the other methods. Copyright © 2011 John Wiley & Sons, Ltd.     

Sol–gel fabrication and enhanced optical properties,photocatalysis, and surface wettability of nanostructured titanium dioxide films

TiO₂ photocatalytic film, annealed at temperatures of 500 °C and 700 °C, was prepared on SiO₂ pre-coated glass via sol–gel technique for photocatalytic purposes and effects of catalyst-type on its properties were investigated by an X-ray diffractometer (XRD), Scanning Electron Microscope, UV–vis spectrophotometer, and contact angle measurements. The XRD results showed that present phases depend upon catalyst used in the solution and phase transformation behaves in a temperature-dependent manner. For the layers derived from sols containing acidic catalysts, the anatase structure dominated and exhibited much better photocatalytic activity. The results indicated that the sample derived from sol comprises H₂SO₄ as catalyst, and exhibits anatase grains with the lowest size. This could be the reason for its better photocatalytic activity. Finally, samples derived from sol containing acidic catalysts showed superhydrophilicity and superior cleaning ability.     

Identifying Periodical Activities Independent of Video Content

In this research, a completely new and accurate method has been presented for detecting periodic activities with the help of machine vision. The proposed method is independent of motion tracking complex algorithms unlike the previous strategies and it is fully independent of contents and types of activities by performing low level calculation. Not using of heavy computations while improving the ability of periodicity detection is regarded as the unique feature of this method. The use of general and flexible framework in this method causes to facilitate the machine vision periodic activities identification process.     

Timing recovery scheme for CV-CCMA receiver

The authors describe a baud-rate timing recovery scheme for a multiuser technique known as complex valued collaborative coding multiple access (CV-CCMA). This synchronisation scheme is suitable for digital signal processing implementation and integrates efficiently within the overall reception system. The timing function is directly derived from the samples of the received signal and adaptively employs the complex gain coefficients which are estimated by the detection process. The statistical performance of this timing function is derived by simulation for various values of E_b/N₀. It is shown that it has a low variance at the desired sampling instant     

Renewable and Storage Energy Integration for Smart Grid Housing

This paper presents the design,implementation and testing of an embedded system that integrates solar and storage energy resources to smart homes within the smart microgrid.The proposed system provides the required home energy by installing renewable energy and storage devices.It also manages and schedules the power flow during peak and off-peak periods.In addition,a two-way communication protocol is developed to enable the home owners and the utility service provider to improve the energy flow and the consumption efficiency.The system can be an integral part for homes in a smart grid or smart microgrid power networks.A prototype for the proposed system was designed,implemented and tested by using a controlled load bank to simulate a scaled random real house consumption behavior.Three different scenarios were tested and the results and findings are reported.Moreover,data flow security among the home,home owners and utility server is developed to minimize cyber-attacks.     

Interconnecting networks with optimized service provisioning

Telecommunication Systems - A recent trend of peering at geo-diversified Internet exchange points (IXPs) has empowered decades-old proposal of inter-networking and opened up new avenues of business...