Investigation of the catalytic activity of LaBO3 (B = Ni, Co, Fe or Mn) prepared by the microwave-assisted method for hydrogen evolution in acidic medium

LaBO₃ (B = Ni, Co, Fe and Mn) were prepared by microwave-assisted citrate method. The electrocatalytic activity toward hydrogen evolution reaction (HER) was investigated. XRD characterization showed that pure perovskite crystals were indeed formed. SEM images showed that changing the type of the B-site metal ion affected the morphology of the prepared perovskites. The influence of the type of B-cation on the catalytic activity toward hydrogen evolution was studied and the order of the electrocatalytic activity was LaFeO₃ > LaCoO₃ > LaNiO₃ > LaMnO₃, that was related to the calculated values of the activation energy 51.61, 45.37, 41.15 and 55.05 kJ mol⁻¹ for LaBO₃ (B = Ni, Co, Fe and Mn), respectively. The reaction order and the reaction mechanism for all the prepared perovskites were identified. In addition, the effect of the partial substitution at the B-site in LaNi_{1 − x}Co_xO₃ was also studied. It was found that among ternary perovskites, the catalytic activity of LaNiO₃ decreased by increasing the fraction of doped-Co.     

White-light emission from a blend of CdSeS nanocrystals of different Se:S ratio

CdSeS nanocrystals with different bandgap energies have been synthesized by the colloidal method. The solution blend of blue-, green-?and red-emitting CdSeS nanocrystals, in appropriate proportions, showed strong white emission of different shades on excitation with a UV source. We observed that the CIE coordinate of the spectrum of a particular blend is independent of excitation wavelength. We also observed that the contribution of self-absorption in energy loss in the blend of CdSeS nanocrystals is not very significant. A white-light-emitting LED has been fabricated by coating a blend mixed with polymethylmethacrylate on a commercial UV-LED.     

Pressurized fluid extraction for quantitative recovery of aflatoxins B1 and B2 from pistachio

A pressurized fluid extraction method for the extraction of aflatoxins B₁ and B₂ from contaminated pistachio samples was developed using a modified supercritical fluid extractor. The parameters of temperature, pressure, and flow rate of the solvent were optimized for the extraction process. The pressure variation in the range of (10–100) bar had an insignificant effect on the aflatoxins extraction yield. Solution of 80% (v/v) methanol in water as the extraction solvent at flow rate of 0.5 mL/min and temperatures of higher than 80 °C were obtained for efficient extraction of aflatoxins B₁ and B₂ from spiked and naturally contaminated pistachio samples. The developed method in comparison with the AOAC method offered the repeatability (RSD) of 13.5% and 12%, respectively, while the extraction yield or recovery of the analytes was about 20% higher corresponding to those obtained with the AOAC method. The higher recovery of the developed method was validated by HPLC analysis and it was also applied to the peanut samples analysis.     

The increasing dominance of science in the economy: Which nations are successful?

Scientometrics - We analyzed breakthrough patents that serve as the basis of emerging technological trajectories and paradigm over 25-years. The results showed that although technological fields...     

Influence of reduced graphene oxide on structural,optical, thermal and dielectric properties of SnO2 nanoparticles

The present work has been carried out with the aim to synthesize tin oxide decorated reduce graphene oxide nanocomposite (SnO₂/RGO-Nc) via in-situ synthesis process and the influence of RGO loading on structural, optical, thermal and dielectric properties of SnO₂ has been discussed. The XRD, FESEM coupled with EDX elemental mapping, TEM, FTIR, Raman and XPS results reveal that the SnO₂ nanoparticles have been successfully incorporated onto the RGO sheets. The reduction in the energy gap of the composite sample as compared to SnO₂ measured from the Tauc’s relation can be attributed to strong coupling between RGO and SnO₂ NPs. Thermogravimetric analysis (TGA) shows improved thermal stability of the SnO₂/RGO-Nc. From the dielectric measurements, it is observed that the dielectric constant and dielectric loss decreases as frequency of applied field increases. AC conductivity of all samples increases as applied frequency increases which follows Jonscher’s power law. All composite samples show better conductivity as compared to SnO₂. This is due to the formation of continuous conductive pathway between SnO₂ and RGO sheets. Further high dielectric constant, low loss and high ac conductivity have been observed at optimum loading of RGO in SnO₂/RGO2-Nc as compared to other composite samples which is due the percolation effects. The impedance analysis exhibits only one semicircle for SnO₂ and SnO₂/RGO composite which suggests that the involvement of grain boundaries dominated over the grain contribution.     

Improving secret key generation for wireless communications in FDD mode

Most recent research on channel‐based key generation oriented to time division duplex system because the channel reciprocity feature is applied directly for secret key generation. Most of commercial cellular systems depend on frequency division duplex (FDD) systems. In this paper, we investigate the impact of uplink and downlink of FDD systems for the generation of shared secret keys between two parties in the presents of passive eavesdropper. In addition, we are considering improving the rate of the secret key for wireless communication in FDD mode. The main idea is to use the fading coefficient of the channels between the relay and other parties as an additional random common source for the secret key generation. Also, explore the using of channel estimation techniques to reduce the channel training sequence and study its effect on the generation of shared key for wireless communications in FDD mode. We derive the upper bound of the generated shared key rate for four scenarios and give numerical examples to reveal the performance of our suggested improvement approaches.     

Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.