PARLOG顺序编译实现技术

PARLOG语言是一种并行逻辑程序设计语言。其关系定义分为单解关系和所有解关系。本文着重讨论PARLOG单解关系基于与/或树模型和进程调度方法的顺序编译实现技术。     

Generalized difference control of parallel streams temperatures

A furnace with multiple parallel passes and multiple burners is commonly seen in petroleum refineries. In order to maintain the furnace running in a safe, stable, and high-efficiency state it is necessary to control the outlet temperatures of the multiple passes to be the same. Due to the fact that the process of the oil heating in such furnace is nonlinear, multivariable, time varying, has serious coupling among passes, has frequent dynamic changes and a large time delay, traditional control methods have trouble in controlling these temperatures, and some advanced control methods, including predictive control, adaptive control, and robust control, are usually too complex for convenient use. In this paper, a control technique, called differences control technique (DsCT), is proposed to distribute the stream flowrates such that the stream temperatures are as identical as possible. The principle of the proposed technique is explained and demonstrated, and the results of its application to a real-life petroleum refinery furnace are also reported. The DsCT technique has the following advantages: it does not need complicated design procedures, the controller structure is simple, it is easy to apply, and it can be canonically applied to furnaces with different number of passes.     

Asset-Management of Transformers Based on Condition Monitoring and Standard Diagnosis [Feature Article]

In this paper, a methodology is developed to use data acquisition derived from condition monitoring and standard diagnosis for rehabilitation purposes of transformers. The interpretation and understanding of the test data are obtained from international test standards to determine the current condition of transformers. In an attempt to ascertain monitoring priorities, the effective test methods are selected for transformer diagnosis. In particular, the standardization of diagnostic and analytical techniques are being improved that will enable field personnel to more easily use the test results and will reduce the need for interpretation by experts. In addition, the advanced method has the potential to reduce the time greatly and increase the accuracy of diagnostics. The important aim of the standardization is to develop the multiple diagnostic models that combine results from the different tests and give an overall assessment of reliability and maintenance for transformers.     

择形催化合成2,6-DMN的研究进展

介绍了2,6-二甲基萘(2,6-DMN)的制备方法,详细论述了萘、甲基萘在分子筛催化剂上择形催化合成2,6-DMN的研究进展,提出了择形催化合成2,6-DMN的研究方向。     

退火对GaAs窗口晶体断裂模数的影响

LEC GaAs晶片经高温退火后，残余应力得以部分释放；从而减小残余应力诱生断裂的可能性，提高了GaAs晶体的断裂模数。原生GaAs晶片加工的样品的断裂模数平均值约为135MPa，经退火的GaAs晶片加工样品的断裂模数平均值更高，约为150MPa，断裂模数最高值达163MPa。     

有粘结预应力在252m地下室顶板中的应用

在总长度 2 5 2m的超长不设缝地下室顶板中 ,采用了预应力、设置后浇带等综合抗裂技术 ,并对有粘结预应力平板的设计理论、施工工艺、锚固体系及超长结构预应力损失控制和抗裂控制作了深入研究。     

IF钢冷轧及再结晶初期微观组织的TEM研究

采用透射电子显微镜对不同压下量和再结晶初期的IF钢样品进行了研究．结果表明：无论是在较小形变量下还是在较大形变量下，形变不均匀性是普遍存在的；冷变形程度不同，织构组分不同，TEM形貌也不同；在再结晶的最初期，冷轧的形变组织演变为近乎等轴的亚晶，优先形成{111}〈uvw〉取向的晶核，晶核逐渐吞并周围的形变基体而长大，最终形成再结晶γ-纤维织构．     

操纵员心理评价方法研究

文章对核电厂操纵员心理定性化评价以及定量化评价方法进行分析和探讨。对轮廓图匹配法和模糊综合评价法的适用范围、应用效果进行了比较分析。该研究的结果可为操纵员评价提供有益参考。     

电镀企业火警和爆鸣事故实例

列举了作者经历的18种火警和爆呜事故，为电镀企业敲响警钟，安全重于泰山。     

清肝明目夏枯草

“夏枯草，味苦辛，性寒，可入肺气郁结所致瘰疬……效果极佳。”但是。在万千而神奇的大自然中，选择夏季这个生命力最为茂盛的季节来结束自己生命的花花草草其实很多。为什么独独夏枯草占了“夏枯”之名？[编者按]