Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

Westernized food habits and concentrations of serum lipids in the Japanese

It has recently been reported that there exists a new 'RING-finger' protein family among the zinc-finger (Zf) proteins. Previously, we had isolated the mouse Mel-18 cDNA (mMel-18) encoding the nuclear RING-finger protein that exhibits an ability to bind to a nonspecific DNA column. Here, we have isolated and characterized the human Mel-18 cDNA (hMel-18) using the mMel-18 cDNA as a probe. The deduced hMel-18 protein contains 344 amino acids (38 kDa) with a RING-finger motif, a helix-loop-helix (HLH)-like structure and a Pro/Ser-rich region. The hMel-18 gene is conserved among vertebrates. Its mRNA is highly expressed in placenta, lung and kidney, but the level is low in liver, pancreas and skeletal muscle. Using in situ hybridization, we mapped hMel-18 to band q22 of chromosome 12. It is possible that the Mel-18/bmi-1 gene family represents a mammalian homologue of the Drosophila polycomb gene group.     

Human papillomavirus-specific serologic response in vulvar neoplasia

We describe a case of positional dyspnea due to compression of the tracheobronchial tree by an extensive thoracic aneurysm. In a 77-year-old woman with long-standing systemic hypertension, intermittent anterior chest pain gradually developed over several years. She had no history of asthma or thoracic trauma. She was admitted to our hospital because of sudden, severe shortness of breath. The breathlessness was markedly worse when she lay on her back or on her right side. On physical examination, she was in acute respiratory distress with cyanosis, severe hypertension (180/110 mmHg), tachycardia, and inspiratory stridor. A chest X-ray film showed loss of volume and nearly complete radiopacity of the left hemithorax. Arterial blood gas analysis revealed an arterial oxygen partial pressure of 54.8 mmHg, a carbon dioxide partial pressure of 39.8 mmHg, and an oxygen saturation of 84.5 percent on room air. Computed tomographic examination of the thorax showed dilation of the aortic arch and descending aorta, and marked compression of the trachea and the left main bronchus. Examination with a fiberoptic bronchoscope revealed extrinsic compression of the trachea just proximal to the carina. The patient's symptoms stabilized. However, she did not undergo surgery because of her age and because of the size of the aneurysm. She died due to rupture of the aneurysm.     

The material properties of sulphonated phenolic resin reinforced cement mortars

The material properties of new sulphonated phenolic resin (SP) reinforced cement mortars have been investigated. SP was found to promote the dispersion of cement particles and to interact with Ca(OH)₂. As a result, the resulting mortars exhibit better workability, more compact structure and higher compressive strength than plain mortars. The mortar with 1 wt% SP present after 28 days curing exhibits a compressive strength of 66MPa, which is about 18% higher than that of plain mortar.     

Influence of body segment dynamics on loads at the lumbar spine during lifting.

Flexion-extension moments acting at the L5/S1 level and hip joints were calculated using three different techniques; a pure static analysis, a static analysis including the inertial force of the load, and a dynamic analysis. Ten subjects participated in the study and were asked to lift a box weighing either 50 N or 150 N, using a freestyle technique. The lifts were performed at normal and fast speed. The intra-subject lifting techniques were consistent when lifting the same loads. The moments predicted by the dynamic analysis and the static analysis were the same when holding weights in static postures. When performing the lifts, differences in the peak moments occurred between static and dynamic analyses. These differences were influenced by external load and by lifting speed. Taking the effect of the inertia of load into account in the static analysis resulted in an increase in the moment magnitude, but the predicted moment was still much less than in the dynamic analysis which yielded the largest moment magnitudes. The difference between dynamic and static analysis was greatest when lifting 50 N at fast speed; an 87% increase in L5/S1 moment and a 95% increase in hip moment was observed when replacing the pure static with a dynamic analysis.     

Computer processing of artifact and arrhythmias in heart rate variability analysis.

Analysis of heart rate variability (HRV) with Holter monitoring is often difficult due to excessive artifacts and arrhythmias. While short sudden surges are treated successfully by most methods, slow heart rate (HR) variations, nocturnal trapezoidally-shaped HR increases and special types of arrhythmias which are similar to normal HRV fluctuations may distort further time domain and spectral analysis. This paper examines the advantages and disadvantages of different methods for preprocessing of HR data. We have developed the following approach to the analysis of HRV. (1) A combination method based on the absolute difference between HR values and both the last normal HR value and an updated mean is used for removal of artifacts and arrhythmias. This method can detect both sudden surges in HR values as well as longer periods of noise combined with slow normal variations. An additional stage of wild point removal is then optionally applied. (2) Certain special problems such as large T-waves, bigeminal rhythm, slow HR variations and nocturnal trapezoidally-shaped HR increases are also identified. Although none of the algorithms can be applied successfully to all cases, the final computer analysis for preprocessing described in the present study has proved to be superior to the simplified methods which are usually used and provides more suitable data for HRV analysis.     

A hybrid wafer-dicing process for GaAs MMIC production

A dicing process for GaAs MMIC (monolithic microwave integrated circuit) wafers using spin-on wax for wafer mounting and a hybrid process of wet chemical etching/mechanical sawing for chip dicing is described. This process minimizes ragged chip edges and reduces generation of microcracks in addition to the elimination of the plated gold burrs on the backside of the diced MMIC chips. This process gives a uniformity of -3 μm across a 2-in wafer following the completion of the whole backside process. This GaAs chip dicing technique is amenable to production because it exhibits both a very high chip yield (>90%) and nearly flawless edges     

The cranial MRI in severe cerebral palsy: a comparative study with clinical data

The magnetic resonance examination was performed in 38 patients with severe cerebral palsy (CP; 15 males and 23 females) who had both motor delay (unable to move anywhere) and mental retardation (I. Q or D. Q below 30). Neuroimaging findings were compared with the CP type, etiology, and grade of understanding of language. Cranial magnetic resonance imagings (MRI) in CP were divided into five types. Type 1 : nine predominantly showed cyst-liked ventricles and periventricular hyperintensity on T2-weighted imaging (PVH) and only scarred basal ganglia and thalamus were visible. All suffered from neonatal asphyxia and the clinical type was rigospastic tetraplegia (RST). Type 2: eleven predominantly showed PVH and hyperintensity on T2-weighted (HT2) in basal ganglia and thalamus. All suffered from neonatal asphyxia and the clinical type was RST or rigospastic diplegia. Type 3: five showed PVH and three had cortical atrophy. All suffered from neonatal asphyxia and the clinical type was spastic diplegia. Type 4: four predominantly showed HT 2 in putamen and thalamus. Three had cortical atrophy. All suffered from neonatal asphyxia. The clinical type was athetotic CP (ATH). Type 5: nine predominantly showed HT 2 in globus pallidus. Four had cortical atrophy and two had hippocampal atrophy. All suffered from neonatal jaundice and the clinical type was ATH. All patients who suffered from neonatal asphyxia and spastic CP had MRI in PVH. All patients who suffered from neonatal asphyxia and ATH showed HT 2 in putamen and thalamus. Almost patients who suffered neonatal jaundice and ATH showed HT 2 in globus pallidus. With athetotic CP, cases with atrophy of the cerebral cortex or/and hippocampus were lower grade of understanding of language than no atrophy of both. The result of studies of MRI are in agreement with neuropathological findings.