Least mean p-power error criterion for adaptive FIR filter

An adaptive FIR filter based on the least mean p-power error (MPE) criterion is investigated. First, some useful properties of MPE function are studied. Three main results are as follows: 1) MPE function is a convex function of filter coefficients; so it has no local minima. 2) When input process and desired process are both Gaussian processes, then MPE function has the same optimum solution as the conventional Wiener solution for any p. 3) When input process and desired process are non-Gaussian processes, then MPE function may have better optimum solution than Wiener solution. Next, a least mean p-power (LMP) error adaptive algorithm is derived and some application examples are presented. Consequently, when the signal is corrupted by an impulsive noise, the adaptive algorithm with p=1 is preferred. Furthermore, when the signal is corrupted by noise or interference, the adaptive algorithm with proper choice of p may be preferred     

焦化厂门型吊改造

从门型吊承轨梁的受力分析入手．研究剖析了原结构产生裂纹的诸多原因．通过理论计算。做出了承轨梁与桁架连接接点的最佳设计．提出了符合现场实际情况的更换承轨梁的最佳方案，为类似设备改造提供了可借鉴的经验。     

ADSS光缆的力学计算

介绍了ADSS光缆的力学计算，给出了光缆弧垂、张力、应变和悬长等计算公式，并对普遍采用的“悬链线”和“抛物线”两种计算方法加以比较。     

Effect of Additives on Magnetic Properties of High Frequency MnZn Power Ferrite

In keeping with the advance of more compact and more power-saving electronic equipment, the demand is increasing for smaller and more efficient switching power supply. Therefore, it is necessary to provide the adequate magnetic power ferrite materials to satisfy the demand. Such ferrite materials have to meet the following main requirement: 1) high initial permeability (μ i ); 2) high saturation magnetic induction (Bs); 3) high Curie temperature (Tc); 4) high electrical resistivity (ρ ); 5)…     

Generalized eigenvectors and fractionalization of offset DFTs and DCTs

The offset discrete Fourier transform (DFT) is a discrete transform with kernel exp[-j2/spl pi/(m-a)(n-b)/N]. It is more generalized and flexible than the original DFT and has very close relations with the discrete cosine transform (DCT) of type 4 (DCT-IV), DCT-VIII, discrete sine transform (DST)-IV, DST-VIII, and discrete Hartley transform (DHT)-IV. In this paper, we derive the eigenvectors/eigenvalues of the offset DFT, especially for the case where a+b is an integer. By convolution theorem, we can derive the close form eigenvector sets of the offset DFT when a+b is an integer. We also show the general form of the eigenvectors in this case. Then, we use the eigenvectors/eigenvalues of the offset DFT to derive the eigenvectors/eigenvalues of the DCT-IV, DCT-VIII, DST-IV, DST-VIII, and DHT-IV. After the eigenvectors/eigenvalues are derived, we can use the eigenvectors-decomposition method to derive the fractional operations of the offset DFT, DCT-IV, DCT-VIII, DST-IV, DST-VIII, and DHT-IV. These fractional operations are more flexible than the original ones and can be used for filter design, data compression, encryption, and watermarking, etc.     

基于媒体用户访问行为偏好模型的代理缓存算法

目前,代理缓存技术广泛应用于改善流媒体传输的服务质量.文章从实际用户日志文件的分析出发,利用发现的用户浏览流媒体对象时的行为分布模型,提出了一种新的视频流媒体缓存算法.仿真结果证明,该算法可以通过记录很少的用户访问信息获取较高的性能表现.     

基于晶体双折射的光学FIR滤波器设计

提出建立在晶体双折射基础上，由晶体延迟片堆组成的光学FIR（Finite Impulse Response)滤波器设计方法，用以实现任意形状光谱输出。从FIR信号理论出发，建立了光学FIR滤波器数学模型，并分析了它与FIR滤波器的映射关系。在给出“输出反向传递法”来完成其光学实现同时，还以G／M滤波器设计实例证明其优良的光谱特性及角度特性。     

微加速度计粘附问题的研究及应用

粘附是影响微机电系统(MEMS)可靠性的重要因素之一。针对MEMS的典型产品——微加速度计的粘附问题进行了研究,给出了2种典型的微加速度计的表征粘附特性的剥离数的表达式,并分析了将粘附条件应用于微加速度计的多学科设计优化之中,分析了其对系统结构设计产生的影响。     

适用于稠油开采的游梁式抽油机设计分析

在稠油开采中,抽油杆在液体中运动时,所受到的摩擦阻尼力很大,有时高达几十千牛。上冲程时,该力有加大悬点载荷的作用;下冲程时,该力使抽油杆下行困难,甚至悬点载荷为零。为了开采稠油,必须根据其特点设计适应的游梁式抽油机。文章分析了稠油用抽油机的受力特点,提出了该类抽油机的设计要求。