Hot drawing of partially miscible blends of polycarbonate and poly(butylene terephthalate)

Samples of PC-PBT blends over the entire composition range were drawn at 160°C to high extensions, 2.1–5.8, to study the mechanical reinforcement and the molecular structure development upon deformation. Elastic modulus E' increases with extension ratio for all compositions and temperatures. Blends with 25 and 40 wt% of PC show higher E' at low temperature than pure PBT blends do. Crystallinity increases with extension ratio and is relatively smaller with increasing PC content. The influence of the reversible α to β crystal form transformation was also studied. The second moment of the orientation function f for both crystal forms increases to high values > 0.9 at relatively low extensions. f decreases with PC content for α crystals but decreases for β crystals. The α fraction is high for PBT and decreases with PC content and extension ratio in the blends. Strain recovery experiments show that the α to β transformation is also elastic in nature at high extension ratios and that the reinforcing effect in high PBT content blends is not due to the α/β ratio. © 1996 John Wiley & Sons, Inc.     

Melt-mixing by novel pitched-tip kneading disks in a co-rotating twin-screw extruder

Melt-mixing in twin-screw extruders is a key process in the development of polymer composites. Quantifying the mixing performance of kneading elements based on their internal physical processes is a challenging problem. We discuss melt-mixing by novel kneading elements called “pitched-tip kneading disk (ptKD)”. The disk-stagger angle and tip angle are the main geometric parameters of the ptKDs. We investigated four typical arrangements of the ptKDs, which are forward and backward disk-staggers combined with forward and backward tips. Numerical simulations under a certain feed rate and screw revolution speed were performed, and the mixing process was investigated using Lagrangian statistics. It was found that the four types had different mixing characteristics, and their mixing processes were explained by the coupling effect of drag flow with the disk staggering and pitched-tip and pressure flows, which are controlled by operational conditions. The use of a pitched-tip effectively controls the balance of the pressurization and mixing ability.     

Synthesis,properties, and biodegradability of three-branched copolyamide (4/6)

Previous studies on polyamide 4, excellent properties, functionalities, and biodegradation in natural condition have been shown. In this study, three-branched (star-shaped) copolyamides constituted of polyamide 4 and polyamide 6 constitutional unit were synthesized by anionic ring-opening copolymerization of 2-pyrrolidone with ε-caprolactam. The thermal and mechanical properties and the biodegradability of the obtained copolyamides have been systematically investigated. The weight-average molecular weight of the copolyamides was as high as tens of thousands (M_w 10–80 × 10³ g/mol). The composition of the copolyamides was approximately in accord with the monomer feed ratio, thereby being controllable. The thermal and mechanical properties changed readily as the composition was varied (T_m 146–266°C, ΔH_m 10–70 J/g, T_d 278–369°C, tensile strength 28–64 MPa, elongation at break 80–750%). The copolyamide having 2-pyrrolidone unit of 96–51 mol% exhibited biodegradability by an activated sludge. The biodegradation of the copolyamide proceeded uniformly without disproportion in constitutional unit.     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Enhancing low-temperature energy harvesting by lead-free ferroelectric Ba(Zr0.1Ti0.9)O3

The energy-harvesting ability of the lead-free ferroelectric Ba(Zr,Ti)O₃ was investigated and greatly enhanced using the Kim novel electrothermodynamic cycle for low-temperature application. Ba(Zr,Ti)O₃ was synthesized with a Zr:Ti ratio of 10:90 (BZT10) by hot-press sintering, which exhibited a mix relaxor-ferroelectric behavior. For power generation using the Kim cycle with low and high temperatures of T_L = 25°C, T_H = 120°C, the most optimized temperature pattern occurred for a heating time of 12.5 s and a cooling time of 22.5 s. Under these conditions, the electric field increased during the novel isodisplacement process, and the displacement variation in the isoelectric step reached the highest value and maximized the BZT10 cycle loop area. Applying these conditions while lowering T_L to 20°C, an energy density N_D = 504 mJ/cm³ was achieved. This value is the highest obtained energy density in a practical test for lead-free ferroelectric bulk material in the BaTiO₃ family.     

Structure formation in stretched sheets of poly(butylene terephthalate)

Crystalline and amorphous sheets of poly(butylene terephthalate) (PBT) were drawn in the temperature range of 20–150°C. The molecular orientation and the relative amount of α- and β-form crystals in the stretched sheets were studied by wide-angle X-ray diffraction (WAXD) and density measurements. When crystalline PBT sheets are drawn at lower temperatures, α-form crystals are partially transformed into β-form crystals. Both α- and β-form crystals are formed by drawing amorphous PBT sheets. The relative amount of α- and β-form crystals is much more sensitive to drawing temperature than to draw ratio. The α-form crystallinity is higher at higher drawing temperature and increases slightly with increasing draw ratio. The second moments of orientation functions of α- and β-form crystals increase with increasing draw ratio, and the increase of the orientation function is suppressed at higher draw ratio. The orientation function of α-form crystals is higher than that of β-form crystals in a same sample.     

Lattice Boltzmann simulation of asymptotic longitudinal mass dispersion in reconstructed random porous media

To research macroscopic mass transport characteristics of porous media, a lattice Boltzmann method (LBM) approach was utilized to calculate asymptotic longitudinal mass dispersion. In this study, a D2Q9 model with multi‐relaxation‐time (MRT) collision operator, which is appropriate for incompressible flow with a high Péclet number without refining the lattice, was chosen. With respect to the microstructure of porous media, random placement (RP) method was applied to obtain randomly positioned particles. Based on the exhausted numerical results presented in the study, a new correlation of longitudinal mass dispersion was established. By comparing with available experimental data in the literature, reasonable agreements are observed in a wide porosity range from 0.3 to 0.7, indicating the validity of the proposed correlation. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2770–2780, 2018     

Development and evaluation of a palm-sized optical PM2.5 sensor

A new palm-sized optical PM_2.5 sensor has been developed and its performance evaluated. The PM_2.5 mass concentration was calculated from the distribution of light scattering intensity by considering the relationship between scattering intensity and particle size. The results of laboratory tests suggested that the sensor can detect particles with diameters as small as ～0.3 µm and can measure PM_2.5mass concentrations as high as ～600 µg/m³. Year-round ambient observations were conducted at four urban and suburban sites in Fukuoka, Kadoma, Kasugai, and Tokyo, Japan. Daily averaged PM_2.5 mass concentration data from our sensors were in good agreement with corresponding data from the collocated standard instrument at the Kadoma site, with slopes of 1.07–1.16 and correlation coefficients (R) of 0.90–0.91, and with those of the nearest observatories of the Ministry of the Environment of Japan, at 1.7–4.1 km away from our observation sites, with slopes of 0.97–1.23 and R of 0.89–0.95. Slightly greater slopes were observed in winter than in summer, except at Tokyo, which was possibly due to the photochemical formation of relatively small secondary particles. Under high relative humidity conditions (>70%), the sensor has a tendency to overestimate the PM_2.5 mass concentrations compared to those measured by the standard instruments, except at Fukuoka, which is probably due to the hygroscopic growth of particles. This study demonstrates that the sensor can provide reasonable PM_2.5 mass concentration data in urban and suburban environments and is applicable to studies on the environmental and health effects of PM_2.5.

Copyright © 2018 American Association for Aerosol Research     

Polymerization of styrene with a simple rare earth metal initiator

The catalytic activity in the polymerization of styrene has been examined using commercially available simple rare earth metal compounds such as Sm(OiPr)₃, Sm(acac)₃, Sm(OCOMe)₃, SmI₂(THF)₂ or SmCl₃ coupled with Et₃Al or methylaluminoxane (MAO). Among these compounds, the Sm(OiPr)₃/AlEt₃ system shows the highest catalytic activity, especially in the presence of a minor amount of toluene at 60 °C. The random copolymerization of styrene with methyl methacrylate suggests that the present polymerization proceeds with a radical polymerization mechanism. (C₅Me₅)SmCl₃Na(THF) and (C₅Me₅)SmCl₃Li(THF) systems exhibit relatively low catalytic activity, even in the presence of AlEt₃. © 2001 Society of Chemical Industry     

Strength improvement and purification of Yb2Si2O7‐SiC nanocomposites by surface oxidation treatment

A two‐step processing was developed to prepare Yb₂Si₂O₇‐SiC nanocomposites. Yb₂Si₂O₇‐Yb₂SiO₅‐SiC composites were first fabricated by a solid‐state reaction/hot‐pressing method. The composites were then annealed at 1250°C in air for 2 hours to activate the oxidation of SiC, which effectively transformed the Yb₂SiO₅ into Yb₂Si₂O₇. The surface cracks purposely induced can be fully healed during the oxidation treatment. The treated composites have improved flexural strength compared to their pristine composites. The mechanism for crack healing and silicate transformation have been proposed and discussed in detail.