Polymerization of [2,5-bis(trifluoromethyl)phenyl]acetylene and polymer properties

Summary [2,5-Bis(trifluoromethyl)phenyl]acetylene [BTFPA; HCCC₆H₃-2, 5-(CF₃)₂]polymerized with W, Mo, and Nb catalysts to produce methanol-insoluble polymers in high yields. The poly(BTFPA) produced by the W(CO)₆-based catalyst at 30 °C was soluble in p-(CF₃)₂C₆H₄, and had relatively high molecular weight ([]=0.352 dL/g in p-(CF₃)₂C₆H₄). The main chain of the polymer was composed of alternating double bonds, and the polymer was a dark brown solid. The temperature at which the weight loss of the polymer started was higher than 300 °C. The polymerization behavior and polymer properties for BTFPA are compared with those for phenylacetylene and [o-(trifluoromethyl)phenyl]acetylene.     

Direct-current measurements of oxide and interface traps onoxidized silicon

A direct-current current-voltage (DCIV) measurement technique of interface and oxide traps on oxidized silicon is demonstrated. It uses the gate-controlled parasitic bipolar junction transistor of a metal-oxide-silicon field-effect transistor in a p/n junction isolation well to monitor the change of the oxide and interface trap density. The dc base and collector currents are the monitors, hence, this technique is more sensitive and reliable than the traditional ac methods for determination of fundamental kinetic rates and transistor degradation mechanisms, such as charge pumping     

Efficient PDFA module using high-NA PbF/sub 2//InF/sub 3/-based fluoride fiber

The highest reported single-pass gain coefficient of 0.36 dB/mW has been achieved using a newly developed Pr/sup 3+/-doped high-NA PbF/sub 2//InF/sub 3/-based fluoride fiber, with a /spl Delta/n of 6.6%, a core diameter of 1.2 /spl mu/m and a transmission loss of 250 dB/km at 1.2 /spl mu/m. This fiber was used to construct an efficient PDFA module with a MOPA-LD. A small-signal net gain of 22.5 dB was achieved at 1.30 /spl mu/m with a pump power of 23m mW.     

Dielectric spectroscopy of metal nanoparticle doped liquid crystal displays exhibiting frequency modulation response

Twisted nematic liquid crystal displays (TN-LCDs), doped with the nanoparticles of metal, such as Pd, Ag, or Ag-Pd, which are protected with ligand molecules, such as nematic liquid crystal, exhibit a frequency modulation (FM) electro-optical (EO) response with short response time of milliseconds (ms) or sub-ms order together with the ordinary rms voltage response. These devices are called FM/AM-TN-LCDs; they are distinct from the ordinary LCDs featured by the amplitude modulation (AM) response. The phenomena of the FM/AM LCDs may be attributed to the dielectric dispersion of a heterogeneous dielectric medium known as the Maxwell-Wagner effect. It is experimentally shown that the frequency range spreads from several tens hertz to several tens kilohertz and the spectrum is more or less centered about the dielectric relaxation frequency. We formulated a theory based on an equivalent circuit model to evaluate the dielectric relaxation frequency and the dielectric strengths; and we succeeded in explaining the dependence of the dielectric relaxation frequency on the concentration of nanoparticles and the their dielectric and electrical properties, whereas conventional theories based on electromagnetic theory are unable to explain this concentration dependence. This paper reports on the experimental results of the EO effects and the dielectric spectroscopy including the dielectric relaxation times and the dielectric strengths of nematic liquid crystal, 5CB (4-pentyl-4'-cyanobiphenyl), doped with the metal nanoparticles of I'd alone and Ag-Pd composite; and discusses how the observed dielectric relaxation frequency or dielectric relaxation time depend on the concentration of the doped nanoparticles and also their electrical and dielectric properties.     

Uniaxial-process-induced strained-Si: extending the CMOS roadmap

This paper reviews the history of strained-silicon and the adoption of uniaxial-process-induced strain in nearly all high-performance 90-, 65-, and 45-nm logic technologies to date. A more complete data set of n- and p-channel MOSFET piezoresistance and strain-altered gate tunneling is presented along with new insight into the physical mechanisms responsible for hole mobility enhancement. Strained-Si hole mobility data are analyzed using six band k/spl middot/p calculations for stresses of technological importance: uniaxial longitudinal compressive and biaxial stress on [001] and [110] wafers. The calculations and experimental data show that low in-plane and large out-of-plane conductivity effective masses and a high density of states in the top band are all important for large hole mobility enhancement. This work suggests longitudinal compressive stress on [001] or [110] wafers and <110> channel direction offers the most favorable band structure for holes. The maximum Si inversion-layer hole mobility enhancement is estimated to be /spl sim/ 4 times higher for uniaxial stress on (100) wafer and /spl sim/ 2 times higher for biaxial stress on (100) wafer and for uniaxial stress on a [110] wafer.     

The sensory region of muscle spindles in the posterior cricoarytenoid muscle of the marmoset

We examined muscle spindles in the posterior cricoarytenoid (PCA) muscle of the marmoset. The spindle capsule contained only one intrafusal muscle fiber which did not form a typical aggregation of equatorial nuclei such as bags and chains. The intrafusal fiber was innervated by sensory endings which branched and arranged irregularly. These sensory endings lay on the surface of the fiber in shallow grooves or deeply penetrated into it. These findings suggest that the muscle spindles in the marmoset PCA muscle are strikingly different in the structure of intrafusal fibers in the arrangement of sensory endings from those in common mammalian skeletal muscles.     

Novel muscle spindles containing muscle fibers devoid of sensory innervation in the extensor digitorum longus muscle of aged rats

We examined the structural features of muscle spindles at the equatorial and juxtaequatorial regions in the extensor digitorum longus muscle of adult (12 months) and aged (25 months) rats. In aged muscle spindles, the lamellated layers of the spindle capsule were a little increased in number compared to those in the adult ones. Two novel muscle spindles were observed in the aged muscle. In one muscle spindle, the spindle capsule contained four thin intrafusal muscle fibers invested by the inner capsule and two muscle fibers between the layers of the spindle capsule. Serial semithin sections revealed that the latter lacked the investment of the spindle capsule at the polar region. The other muscle spindle contained four intrafusal muscle fibers: two thin sensory-innervated muscle fibers invested by the inner capsule and two thick muscle fibers similar in structural features to neighboring extrafusal muscle fibers and lacking sensory innervation within the wide periaxial space. These findings suggest that two muscle fibers between the layers of the spindle capsule may be invested by the newly formed capsular cells during aging, while two thick fibers within the periaxial space may fail to receive the sensory innervation during the early development and follow the course of extrafusal fiber differentiation.     

Modeling of NBTI saturation effect and its impact on electric field dependence of the lifetime

Negative Bias Temperature Instability of pMOSFETs is investigated under various stress gate voltages and temperatures. It is shown that degradation tends to saturate and the dependence of lifetime on electric field (E_ox) is expressed as a power-law of E_ox. We propose new empirical and kinetic models. The E_ox dependence of the lifetime described by the power-law is derived from our empirical model describing the saturation of degradation. Moreover, our kinetic model explains the saturation behavior.     

Effects of processing and cooking on the levels of pesticide residues in soybean samples

The effects of processing and cooking on the levels of pesticide residues in soybean samples were investigated for 14 pesticides in pre-harvest samples. On soaking, the transfer ratios (%, total pesticide residue amount in product/that in soybean) of soaked soybean were greater than 60% for most of the pesticides investigated. The transfer ratio of soymilk ranged from 37% to 92%, and that of tofu ranged from 7% to 63%. The processing factor (Pf, the concentration (mg/kg) of pesticide in product/that in soybean) of tofu ranged from 0.026 to 0.28. These values varied among pesticides. There was a high correlation between the log P(ow) and the transfer ratio of tofu. The test described here should be useful to obtain the transfer ratios of pesticide residues in processing and/or cooking steps.     

Measurement of liquid water content in cathode gas diffusion electrode of polymer electrolyte fuel cell

Water management in cathode gas diffusion electrode (GDE) of polymer electrolyte fuel cell (PEFC) is essential for high performance operation, because liquid water condensed in porous gas diffusion layer (GDL) and catalyst layer (CL) blocks oxygen transport to active reaction sites. In this study, the average liquid water content inside the cathode GDE of a low-temperature PEFC is experimentally and quantitatively estimated by the weight measurement, and the relationship between the water accumulation rate in the cathode GDE and the cell voltage is investigated. The liquid water behavior at the cathode is also visualized using an optical diagnostic, and the effects of operating conditions and GDL structures on the water transport in the cathode GDE are discussed. It is found that the liquid water content in the cathode GDE increases remarkably after starting the fuel cell operation due to the water production at the CL. At a high current density, the cell voltage drops suddenly after starting the operation in spite of a low water content in the cathode GDE. When the GDL thickness is increased, much water accumulates near the cathode CL and the fuel cell shuts down immediately after the operation. In the final section of this paper, the structure of cathode GDL that has several grooves for water removal is proposed to prevent water flooding and improve fuel cell performance. This groove structure is effective to promote the removal of the liquid water accumulated near the active catalyst sites.