Comparison of enteral nutrition with combined enteral and parenteral nutrition in post-pancreaticoduodenectomy patients: a pilot study

Background  

Many clinical studies have demonstrated that early postoperative enteral nutrition (EN) improved the postroperative course. Post-pancreaticoduodenectomy (PD), patients tend to suffer from postoperative nausea, abdominal distention, and diarrhoea, causing difficulty in the introduction of EN. In this pilot study, we investigated the appropriate nutritional mode post-pancreatic surgery.     

Detection of back-side pit on a ferrous plate by magnetic flux leakage method with analyzing magnetic field vector

We have developed a magnetic flux leakage (MFL) system using magnetic resistive (MR) sensors for detecting two dimensional magnetic field components, and an induction coil that generates low magnetic field strengths and extremely low frequencies. The signal at each scanned measurement point (i) was divided by the signal strength M_mes,i and phase α_i by a lock-in amplifier. Using the strength M_mes,i and phase α_i, we calculated the imaginary part of the signal using the common phase β. By optimization of the common phase β to the imaginary part, the analyzed scanning data curve was shown to be effective in estimating the size (depth and diameter) of back-side pits on a ferrous plate. Comparing the two dimensional magnetic field components of leakage, the imaginary part of the y-component parallel to the induced magnetic field was found to be suitable for detecting the back-side pits.     

Effects of polyglycerol esters of fatty acids and ethylene‐vinyl acetate co‐polymer on crystallization behavior of biodiesel

Biodiesel fuels (BDF) have many problems in the cold due to their crystallization properties. In particular, precipitation of large crystals of high‐melting fractions in BDF at low temperatures remarkably changes cold flow property of BDF and, thereby, it increases the values of cold filter plugging point. In this study, we evaluated polyglycerol esters of fatty acids (PGE) and ethylene‐vinyl acetate co‐polymer (EVA) as chemical additives to improve the cold flow property of palm oil‐based FAME (PFME). The results of solid fat content measurement indicate that the simultaneous addition of PGE and EVA showed synergistic effects on suppression of crystallization of PFME, however such effect was not observed when EVA was used alone. DSC thermograms indicated that the PGE additives not only decreased the crystallization temperature but also kinetically suppressed the crystal growth. Polarized light microscopy showed that the simultaneous addition of PGE and EVA led to the formation of considerably small and fine‐dispersed crystals of PFME. These results indicate that combined effects of PGE and EVA caused the formation of fine‐dispersed PFME crystals, which could improve the viscous properties of palm oil‐based BDF at relatively cold temperatures.     

Distractor devaluation effect in the attentional blink: Direct evidence for distractor inhibition.

When two targets (T1 and T2) are embedded in rapid serial visual presentation (RSVP), T2 is often missed (attentional blink, AB) if T2 follows T1 by less than 500 ms. Some have proposed that inhibition of a distractor following T1 contributes to the AB, but no direct evidence supports this proposal. This study examined distractor inhibition by assessing a distractor devaluation effect where inhibited items were evaluated less positively than controls. Experiments 1 and 2 showed that a distractor presented just after T1 was evaluated less favorably when T2 was misidentified, independently of stimulus characteristics. Experiment 3 produced distractor devaluation in T2 incorrect trials when the evaluated distractor was the second item after T1. In contrast, a distractor presented before T1 was not devaluated (Experiment 4). Experiment 5 demonstrated that participants could not recognize presented distractors after an RSVP task, rejecting the possibility that memorized distractors were devalued. Results show a relationship between the devaluation of distractors following T1 and the AB, providing the first direct evidence of the distractor inhibition during the AB. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Crystallization behaviours around the glass transition temperature in an amorphous Fe–Nb–B alloy

Crystallization behaviours around the glass transition temperature in an amorphous Fe₇₀Nb₁₀B₂₀ alloy were investigated by means of transmission electron microscopy. Dense bcc-Fe nanocrystals initially appeared as the primary phase, followed by the dense formation of the (Fe,Nb)₂₃B₆ nanocrystalline phase. The bcc-Fe nanocrystals were formed even by annealing at a temperature that is 38 K lower than the glass transition temperature. A difference of the low temperature behaviours between the present conventional amorphous alloy and a bulk metallic glass was discussed.     

Analysis of residual vulcanization accelerators in baby bottle rubber teats

An analytical method was established for the determination of dialkyldithiocarbamates (DTCs) in chloroform-acetone extracts from rubber teats for baby bottles. DTCs in the extracts were derivatized into ethyl esters and analysed by gas chromatography employing nitrogen-phosphorus detection. Dimethyldithiocarbamate and diethyldithiocarbamate were detected at levels up to 3.2 micrograms/g rubber and up to 4.6 micrograms/g rubber (as dithiocarbamic acid), respectively, in the extracts from commercially available isoprene rubber tests. DTCs can form secondary amines by acid hydrolysis, although the levels of DTCs in the extracts only made a minor contribution to the total level of measured secondary amine precursors.     

Commercialized fast reactor cycle systems and reactor core performance of the promising fast reactors

The Feasibility Study on Commercialized Fast Reactor (FR) Cycle Systems is under progress in order to propose prominent FR cycle systems that will respond to the diverse needs of society in the future. The design studies on various FR system concepts have been achieved and then the evaluations of potential to achieve the development targets have been also carried out. Crucial development issues have been found out for each FR system concept and their development plans for the key technologies are summarized as the roadmap. As a result, it has been confirmed that the sodium-cooled FR concept is highly suited to the development targets and R&D issues are related enhancing the economy with certain perspectives for realization. A flexible and robust development program for the FR cycle system will be proposed taking account of the characteristics for each FR concept until the end of the Phase II study.     

Secondary neutral and ionized particle measurements under MeV-energy ion bombardment

We have measured both secondary neutral and ionized particles from an InSb target under 3.0 MeV Si ion bombardment. Measurements of both ions and neutrals have not been carried out so far in the MeV-energy range. The mass spectra and axial emission energy distributions of secondary particles were investigated. Secondary ions were measured with a linear- and a reflective-type time-of-flight technique, whereas secondary neutral particles were photo-ionized by a UV pulsed laser (ArF: 193 nm) and measured with a reflective-type time-of-flight technique. Different results were obtained for neutral particles in comparison with ionized particles. The mean energy of neutral Sb atoms was much lower than that of neutral In atoms, whereas the mean energies of secondary In and Sb ions were nearly equal.     

Reductive activation of dioxygen: A new concept for the catalytic oxidation

Transition metal–dioxygen complexes, which have been studied intensively in relevance to the active species of oxygenation with dioxygen molecule, are classified according to the extent of electron transfer from the metal center(s) to the O₂ ligand. A new O₂-activation method via a higher valent bis(μ-oxo) dimetal species resulting from extensive electron transfer is proposed on the basis of the results of our bioinorganic studies on the dioxygen complexes supported by the hydrotris(3,5-diisopropylpyrazolyl)borate ligand (Tp^iPr).     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.