Construction of 144, 565 keV and 5.0 MeV monoenergetic neutron calibration fields at JAERI

Monoenergetic neutron calibration fields of 144, 565 keV and 5.0 MeV have been developed at the Facility of Radiation Standards of JAERI using a 4 MV Pelletron accelerator. The 7Li(p,n)7Be and 2H(d,n)3He reactions are employed for neutron production. The neutron energy was measured by the time-of-flight method with a liquid scintillation detector and calculated with the MCNP-ANT code. A long counter is employed as a neutron monitor because of the flat response. The monitor is set up where the influence of inscattered neutrons from devices and their supporting materials at a calibration point is as small as possible. The calibration coefficients from the monitor counts to the neutron fluence at a calibration point were obtained from the reference fluence measured with the transfer instrument of the primary standard laboratory (AIST), a 24.13 cm phi Bonner sphere counter. The traceability of the fields to AIST was established through the calibration.     

Application of nonlinear fitting and selection of the most fitted equation by AIC in stability test of pharmaceutical ingredients

We proposed a method for objectively selecting the most fitted rate equation among candidate rate equations based on chemical kinetics by both nonlinear regression analysis and Akaike's information criterion (AIC), to express the decrease of pharmaceutical ingredient as an appropriate equation. Pseudo-zero, first, and second-order rate equations were prepared as candidates beforehand, and AIC was introduced for selecting the most fitted rate equation among the candidates. We compared the proposed method to the Weibull method that expressed any decrease patterns as a single equation.

We quantified the contents of thiamine nitrate (VB1) and taurine after storage for one, three, and six months under 40°C-75% relative humidity by high-pressure liquid chromatography. Decrease patterns of each sample were most fitted to one of the candidate rate equations, that is, pseudo-zero, first, and second-order rate equations, respectively, and the degree of fit in the most fitted equation was superior to that of the Weibull method, except for the pseudo-first-order rate equation.

Moreover, we confirmed that the proposed method was considerably precise for estimating the stability of pharmaceuticals by comparing estimated residual rates and confidence intervals to experimental data.     

Effects of phase changes on reflection and their wavelength dependence in optical profilometry

The method as well as an appropriate instrumentation for measuring phase changes of reflected light is described. The phase changes on samples of Au, Al, Ag, and Cr evaporated films are measured for five wavelengths (lambda) from 442 to 633 nm, with respect to the phase change at the glass-air interface, where it should be zero. The measured results for the Au film are in fairly good agreement with values calculated by use of optical constants from a handbook or the complex refractive index measured by an ellipsometer. The phase changes for Al and Ag films are different from calculated values by ~5 degrees or a shift length of 4.4 nm at lambda = 633 nm, while those of the Cr film show large shifts as high as 16 degrees or a shift length of 9.8 nm at lambda = 442 nm.     

An attempt to add biological functions by genetic engineering in order to produce high-performance bioreactor cells for hybrid artificial liver: transfection of glutamine synthetase into Chinese hamster ovary (CHO) cell

Ureteral triplication is a rare congenital anomaly of the upper urinary tract. It is reported to be associated with an increased incidence of congenital anomalies as well as a predisposition to infection and calculus formation. We report a case of type 1 variant of ureteral triplication associated with vesicoureteral reflux into lower and mid pole ureters in a solitary kidney. To our knowledge ureteral triplication in a solitary kidney has not been described previously.     

Friction Powder Compaction for Fabrication of Open-Cell Aluminum Foam by the Sintering and Dissolution Process Route

A new friction powder compaction (FPC) process by the sintering and dissolution process (SDP) route for fabricating open-cell aluminum (Al) foam, which requires no external heat sources, was developed. Foams with porosities of 74 and 83 pct were successfully fabricated and their compressive responses were investigated. The sintered mixture during the removal process was observed nondestructively by X-ray computed tomography (CT) to reveal the progress of the removal of soluble particles and to confirm that they were completely dissolved.     

Effect of concurrent use of ondansetron hydrochloride and dexamethasone against nausea and vomiting in lung cancer patients receiving cisplatin

We examined the efficacy of concurrent use of ondansetron hydrochloride and dexamethasone, and the effective dose of dexamethasone against nausea and vomiting in lung cancer patients receiving chemotherapy including single high dose cisplatin. The study was carried out on total of 44 courses of chemotherapy in either initial onset or recurrence of lung cancer. The patients were given 4 mg of ondansetron injection on the day of cisplatin injection (Day 1), and 4 mg/day of ondansetron tablet for Days 2 to 4. These patients were randomly allocated into 2 groups, i.e., those who, on Day 2, concomitantly received 10 mg of dexamethasone (D10 Group, 22 courses) or 20 mg (D20 Group, 22 courses), for comparing the antiemetic effects in a different concomitant dose of dexamethasone. An efficacy rate of 70% or more was achieved in each group for acute emesis on Day 1. The efficacy rate was 80% or above for emesis on Day 2 when dexamethasone was concurrently administered, and Days 3 and 4 in both groups. No significant difference was observed between the groups. A higher complete suppression rate against nausea was seen in D20 Group even though the difference from D10 Group was not significant. Furthermore, food intake rate on Day 2 was significantly better in D20 Group. However, in the cases that were graded effective or markedly effective for acute emesis on Day 1, the efficacy rate was also high in both groups through Days 2-4. It was notable that the efficacy rate of Days 2-4 was 100% in D2 Group. The high efficacy rate was shown in male patients regardless of which dose of dexamethasone was used. However, control of emesis was unfavorable in female patients on Day 1 and was still unfavorable even though dexamethasone was combined from Day 2. We considered from the above results that 10 mg/day of concurrent dexamethasone is sufficient in suppression of delayed emesis on Day 2. However, in order to improve nausea or food intake, or to suppress emesis in patients who are highly likely to show unfavorable control for Day 2 and onward, 20 mg/day should also be effective.     

Overall Adsorption Isotherm of Natural Organic Matter

Adsorption equilibrium data in lumped water quality indices obtained for diluted solutions of a peat water and effluents from a wastewater treatment were analyzed using the ideal adsorbed solution theory with the Freundlich equation. The use of the same value for Freundlich exponent 1∕n in the ideal adsorbed solution theory resulted in a straightforward and less computationally demanding expression to describe an overall batch adsorption isotherm. A fictive component approach, assuming a logarithmic normal distribution of Freundlich K and a nonadsorbable fraction, adequately described and predicted the overall isotherms for different initial concentrations of diluted solutions presented as a lumped water quality index. The parameters in the distributed fictive component approach were independently sensitive to each portion of an isotherm curvature. Preferential adsorption of the smaller molecular weight (MW) components was observed by a size-exclusion high-performance liquid chromatography. Two-dimensional distribution analysis of organics in terms of Freundlich K and MW revealed a weak tendency of the adsorptive strength to decrease with the increase of the MW.