Accumulative gene integration into a pre-determined site using Cre/loxP

Site-specific gene recombination systems, such as Cre/loxP, have been used for genetic modification of cells and organisms in both basic and applied research. We previously developed an accumulative gene integration system (AGIS), in which target gene cassettes could be repeatedly integrated into a pre-determined site on a plasmid or cellular genome by recombinase-mediated cassette exchange (RMCE), using Cre and mutated loxPs. In the present study, we designed a simplified AGIS. For gene integration into a target site, the previous system used two loxP sites in the acceptor DNA, whereas the new system uses a single loxP site. The gene integration reactions were repeated four times in vitro using Cre protein and specific plasmids. The expected integration reactions mediated by Cre occurred at the loxP sites, resulting in integration of four target genes. The system was also used for genomic integration of reporter genes using Chinese hamster ovary (CHO) cells. The reporter genes were efficiently introduced into the CHO genome in a Cre-dependent manner, and transgene expression was detected after the integration reaction. The expression levels of the reporter genes were enhanced, corresponding to the increase of transgene copy number. Recombinase-mediated AGIS provides a useful tool for the modification of cellular genomes.     

Rapid Desensitization of Lipolysis in the Visceral and Subcutaneous Adipocytes of Rats

In adipocytes, short and long term stimulation of β adrenergic receptors (βAR) induces the desensitization to catecholamines, leading to a decrease in the intracellular accumulation of cAMP, but the roles played by this in lipolysis is not clear. In this study, we assessed the catecholamine-induced desensitization of lipolysis and compared this in adipocytes isolated from visceral and subcutaneous fat tissues of rats. When adipocytes were pretreated with isoproterenol (ISO), the norepinephrine (NE)-induced lipolysis was significantly reduced dose- and time-dependently. A similar reduction of the lipolytic response was also found in NE-, dobutamine-, terbutaline- or BRL37344-induced lipolysis. The ISO- and each βAR agonist-induced lipolysis in the visceral fat was not only higher than in the subcutaneous fat, but also markedly reduced by ISO- or NE-pretreatment. These results showed that short-term treatment of three subtypes of βAR by each agonist induces a rapid reduction in the lipolytic response to βAR stimulation. This suggests some common mechanism for the rapid desensitization of βAR-agonist-induced lipolysis, in contrast with previous reports on the characteristics of βAR subtypes. In addition, the regional difference of adipose tissue not only in inducing lipolysis but also in rapid desensitization was also apparent.     

Fuel and emissions properties of Stirling engine operated with wood powder

From viewpoints of the environment and fuel cost reduction, small-scale biomass combined heat and power (CHP) plants are in demand, especially wood-waste fueled system, which are simple to operate and maintenance-free with high thermal efficiency similar to oil fired units. These are requested by wood and other industries located in mountainous region. To meet these requirements, a Stirling engine CHP system combined with simplified biomass combustion process with pulverized wood powder was developed.In an R&D project started in 2004 considering wood powder properties as a fuel, combustion performance and emissions in combustion flue gas were tested using combustion test apparatus with commercial size units. The wood powder combustion system was modified and optimized during the combustion test results, and the design of the demonstration plant combined with 55 kW_e Stirling engine power unit was considered. The demonstration plant was finally completed in March of 2006, and test operation has been progressed for the future commercial CHP system.In the wood powder combustion test, wood powder of less than 500 μm is mainly used, and a combustion chamber length of 3 m is applied. In these conditions, the air ratio can be reduced to 1.1 without increasing CO emission of less than 10 ppm and combustion efficiency of 99.9%. In the same conditions, NO_x emission is estimated to be less than 120 ppm (6% O₂ basis). Wood powder was confirmed to have excellent properties as a fuel for Stirling engine CHP system. This paper summarizes the wood powder combustion test, and presents the evaluation of the burner design parameters for the biomass Stirling engine system.     

Optical Spectra of Synthetic Spinels in the System MgAl2O4–MgCr2O4

Unpolarized optical spectra were measured in the wavelength range 322–1666 nm by the diffuse reflection technique from spinel powders synthesized in the system MgAl₂O₄–MgCr₂O₄. The spectra were interpreted by the crystal-field theory on the basis of trigonally distorted spinel octahedra with D_3d symmetry. For chromium-rich solid solutions, including the MgCr₂O₄ end-member, results after peak fittings showed octahedral D_3d local symmetry around Cr³⁺ ions, identical to the crystallographic site symmetry. For chromium-poor solid solutions, however, octahedral C_3v local symmetry was suggested around Cr³⁺ ions, different from the D_3d crystallographically expected.     

Early Fixation of Cobalt-Chromium Based Alloy Surgical Implants to Bone Using a Tissue-engineering Approach

To establish the methods of demonstrating early fixation of metal implants to bone, one side of a Cobalt-Chromium (CoCr) based alloy implant surface was seeded with rabbit marrow mesenchymal cells and the other side was left unseeded. The mesenchymal cells were further cultured in the presence of ascorbic acid, β-glycerophosphate and dexamethasone, resulting in the appearance of osteoblasts and bone matrix on the implant surface. Thus, we succeeded in generating tissue-engineered bone on one side of the CoCr implant. The CoCr implants were then implanted in rabbit bone defects. Three weeks after the implantation, evaluations of mechanical test, undecalcified histological section and electron microscope analysis were performed. Histological and electron microscope images of the tissue engineered surface exhibited abundant new bone formation. However, newly formed bone tissue was difficult to detect on the side without cell seeding. In the mechanical test, the mean values of pull-out forces were 77.15 N and 44.94 N for the tissue-engineered and non-cell-seeded surfaces, respectively. These findings indicate early bone fixation of the tissue-engineered CoCr surface just three weeks after implantation.     

Relationships between base-catalyzed hydrolysis rates or glutathione reactivity for acrylates and methacrylates and their NMR spectra or heat of formation

The NMR chemical shift, i.e., the π-electron density of the double bond, of acrylates and methacrylates is related to the reactivity of their monomers. We investigated quantitative structure-property relationships (QSPRs) between the base-catalyzed hydrolysis rate constants (k1) or the rate constant with glutathione (GSH) (log k(GSH)) for acrylates and methacrylates and the (13)C NMR chemical shifts of their α,β-unsaturated carbonyl groups (δC(α) and δC(β)) or heat of formation (Hf) calculated by the semi-empirical MO method. Reported data for the independent variables were employed. A significant linear relationship between k1 and δC(β), but not δC(α), was obtained for methacrylates (r(2) = 0.93), but not for acrylates. Also, a significant relationship between k1 and Hf was obtained for both acrylates and methacrylates (r(2) = 0.89). By contrast, log k(GSH) for acrylates and methacrylates was linearly related to their δC(β) (r(2) = 0.99), but not to Hf. These findings indicate that the (13)C NMR chemical shifts and calculated Hf values for acrylates and methacrylates could be valuable for estimating the hydrolysis rate constants and GSH reactivity of these compounds. Also, these data for monomers may be an important tool for examining mechanisms of reactivity.     

Improvement of the surface quality of foam injection molded products from a material property perspective

Microcellular injection molding is an attractive method. However, their surface imperfections have been a major problem hindering wide industrial applications. Several methods have been proposed to improve the surface appearance of foams. In this study, we proposed a method to improve the surface appearance of polypropylene (PP) foams from the material property perspective, especially with regard to crystallization and viscosity. The basic idea of the surface improvement is to reduce the size of bubbles generated at the flow front, delay the solidification behavior of the polymer at the mold interface, squeeze the bubbles existing at the mold–polymer interface, and redissolve the bubbles into the polymer by holding pressure. Blending a low-modulus PP delays the crystallization of the polymers at the skin layer and solidification, taking enough time to squeeze the bubbles smaller. A sorbitol-based gelling agent, bis-O-([4 methylphenyl]methylene)-D-Glucitol, was used to increase the viscosity at a low strain rate to reduce the size of the bubbles generated at the flow front during the filling stage. The foam injection molding experiments demonstrated that the proposed method effectively improved the surface appearance of the foams. In particular, the surface appearance of the foams became almost equivalent to that of solid samples using low-modulus PP.     

Dynamic Mechanical Properties and Adhesive Strengths of Emulsion Polymer by Power Feed Technique, I

Dynamic mechanical properties and adhesive strengths of power feed copolymer and random copolymer synthesized using styrene or methyl methacrylate and n-butyl acrylate were investigated. Although the two systems were synthesized from the same raw materials, power feed copolymer had a very broad transition compared with random copolymer. This fact was explained by the fact that the system synthesized through power feed method was an alloy of copolymers which are a continuous series from monomer A rich copolymers to monomer B rich copolymers. The dynamic mechanical behavior of film cast from solution was almost the same as that of emulsion film, which indicated more extensive application of power feed copolymer. In the P(nBA/St) system, power feed copolymer maintained its adhesive strengths over a wide temperature range compared with random copolymer. The absolute value, however, was not so high. This was due to the low cohesive strengths of the films.     

Synthesis of Compositionally Homogeneous Sr(CuxZn1−x)1/2W1/2O3

A complex perovskite of Sr(Cu _x Zn_{1- x} )_1/2 W_1/2O₃ (SCZW) is synthesized by a new combination of wet and dry processess. Mixed oxides containing Cu²⁺ and Zn²⁺ (CZ) are prepared by the wet process (coprecipitate method). SCZW is obtained by the dry process (mixed-oxide method) from a mixture of CZ, SrCO₃, and WO₃. SCZW has practically no compositional, unlike solid solutions prepared by the conventional dry method. The wet–dry process method is useful because the wet process is applied to only B-site cations having the same valence.     

Dietary CLA and DHA modify skin properties in mice

This study investigated the influence of PUFA on the properties of mouse skin. Mice (3 wk old) were given free access to oils high in linoleic acid, CLA, or DHA for 4 wk. At the end of the experiment, their skins were compared by both biochemical and histological methods. No significant differences in lipid and collagen contents were detected among treatments, although the FA composition in the skin was altered depending upon the FA composition of the supplemented oils. Electron microscopy revealed that the subcutaneous tissue layers in the CLA and DHA groups were significantly thinner than that in the high linoleic acid group, whereas no differences in the thickness of dermis layers were observed among the three groups. These results suggest that skin properties in mice are readily modified by dietary FA sources within 4 wk of dietary oil supplementation.