Conversion of vegetable oil to biodiesel using immobilized Candida antarctica lipase

Biodiesel derived from vegetable oils has drawn considerable attention with increasing environmental consciousness. We attempted continuous methanolysis of vegetable oil by an enzymatic process. Immobilized Candida antarctica lipase was found to be the most effective for the methanolysis among lipases tested. The enzyme was inactivated by shaking in a mixture containing more than 1.5 molar equivalents of methanol against the oil. To fully convert the oil to its corresponding methyl esters, at least 3 molar equivalents of methanol are needed. Thus, the reaction was conducted by adding methanol stepwise to avoid lipase inactivation. The first step of the reaction was conducted at 30°C for 10 h in a mixture of oil/methanol (1:1, mol/mol) and 4% immobilized lipase with shaking at 130 oscillations/min. After more than 95% methanol was consumed in ester formation, a second molar equivalent of methanol was added and the reaction continued for 14 h. The third molar equivalent of methanol was finally added and the reaction continued for 24 h (total reaction time, 48 h). This three-step process converted 98.4% of the oil to its corresponding methyl esters. To investigate the stability of the lipase, the three-step methanolysis process was repeated by transferring the immobilized lipase to a fresh substrate mixture. As a result, more than 95% of the ester conversion was maintained even after 50 cycles of the reaction (100 d).     

Effect of Polymer Dispersant Structure on Electrosteric Interaction and Dense Alumina Suspension Behavior

The present paper reports on research on the effect of molecular structure of polymer dispersants on the relationship between the electrosteric interaction of dispersants on solid surfaces and the viscosity of suspensions. Ammonium polyacrylate with different hydrophilic to hydrophobic ratios ( m:n ) was prepared and added to dense Al₂O₃ suspensions (40 vol%). The steric interactions and adsorbed structures of dispersants on Al₂O₃ powders were examined under an atomic force microscope (AFM). An optimum hydrophilic to hydrophobic group ratio, which was obtained from the maximum repulsive force and the minimum viscosity of suspension, was determined at m :n = 3:7. The changing mechanism of the adsorbed structure and the steric interaction of dispersants and the suspension viscosity by the hydrophilic to hydrophobic molecular ratio were discussed by comparing the experimental force curve and DLVO theory.     

Reductive decomposition of nitrate ion to nitrogen in water on a unique hollandite photocatalyst

Photocatalysis of a hollandite compound K_xGa_xSn_8−xO₁₆ (x = ca. 1.8) was examined for the reduction of nitrate ion with a reducing agent of methanol in water under UV irradiation. Hollandites have a characteristic one-dimensional tunnel structure. The hollandite powder, which was prepared by the sol–gel method and unloaded with any additives like metals, was used as the photocatalyst and its photocatalytic reaction was analyzed quantitatively by using ion chromatography and on-line mass spectrometry, and its reaction mechanism was analyzed by in-situ FT-IR. The hollandite photocatalyst showed a significant activity for the formation of N₂ from NO₃⁻. The nitrate was reduced to N₂ and NO₂⁻, while the reducing agent methanol was partly oxidized to change to formic acid. The conversion of NO₃⁻was proportional to the yields of N₂, NO₂⁻, and HCOO⁻. The present photocatalyzed decomposition of NO₃⁻ to N₂ would be a useful photocatalysis for the environmental protection of water.     

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Biodegradable polymeric composites were fabricated from poly(butylene succinate) (PBS) and kenaf fiber (KF) by melt mixing technique. The mechanical and dynamic mechanical properties, morphology and crystallization behavior were investigated for PBS/KF composites with different KF contents (0, 10, 20, and 30 wt %). The tensile modulus, storage modulus and the crystallization rate of PBS in the composites were all efficiently enhanced. With the incorporation of 30% KF, the tensile modulus and storage modulus (at 40°C) of the PBS/KF composite were increased by 53 and 154%, respectively, the crystallization temperature in cooling process at 10°C/min from the melt was increased from 76.3 to 87.7°C, and the half‐time of PBS/KF composite in isothermal crystallization at 96 and 100°C were reduced to 10.8% and 14.3% of that of the neat PBS, respectively. SEM analysis indicates that the adhesion between PBS and KF needs further improvement. These results signify that KF is efficient in improving the tensile modulus, storage modulus and the crystallization rate of PBS. Hence, this study provides a good option for preparing economical biodegradable composite. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Enhanced activity and stability of Pt/C fuel cell anodes by the modification with ruthenium-oxide nanosheets

Ruthenium-oxide nanosheet (RuO₂ns) crystallites with thickness less than 1 nm were prepared via chemical exfoliation of a layered potassium ruthenate and deposited onto carbon supported platinum (Pt/C) as a potential co-catalyst for fuel cell anode catalysts. The electrocatalytic activity towards carbon monoxide and methanol oxidation was studied at various temperatures for different RuO₂ns loadings. An increase in electrocatalytic activity was evidenced at temperatures above 40 °C, while little enhancement in activity was observed at room temperature. The RuO₂ns modified Pt/C catalyst with composition of RuO₂:Pt = 0.5:1 (molar ratio) exhibited the highest methanol oxidation activity. CO-stripping voltammetry revealed that RuO₂ns promotes oxidation of adsorbed CO on Pt. In addition to the enhanced initial activity, the RuO₂ns modified Pt/C catalyst exhibited improved stability compared to pristine Pt/C against consecutive potential cycling tests.     

New strategy for enhancement of microbial viability in simulated gastric conditions based on display of starch-binding domain on cell surface

The C-terminal region of the peptidoglycan hydrolase (CPH) of Lactococcus lactis IL1403 fused to the linker region and the starch-binding domain (SBD) of the *-amylase of Streptococcus bovis 148 was produced intracellularly in Escherichia coli. The fusion protein (CPH-SBD) was able to bind to the cell surface of Lactobacillus casei NRRL B-441 and to corn starch. Therefore, adhesion of cells to corn starch was mediated by the fusion protein. At a cell density of 10(9) cfu/ml and a starch concentration of 5 mg/ml, CPH-SBD-displaying L. casei cells aggregated with corn starch, whereas the free cells of L. casei did not form any aggregates with corn starch. After incubation in simulated gastric juice (pH 3.0, 1 h), the survival percentages of free cells, amylose-coated free cells, and free cells mixed with corn starch were 0.074%, 7.2%, and 3.1% respectively. When CPH-SBD-displaying bacteria aggregated with corn starch, their survival percentage was 8% higher than that of free cells mixed with corn starch. The survival of the amylose-coated CPH-SBD-displaying L. casei cells was comparable to that of amylose-coated free cells, whereas the survival percentage of amylose-coated aggregates of CPH-SBD-displaying bacteria with corn starch was 28% higher than that of amylose-coated mixture of free cells with corn starch. These results demonstrate the potential usefulness of the cell-surface display technique for enhancement of the delivery of viable microorganisms to the intestinal tract.     

Towards creating reversible silicon-based composite anodes for lithium ion batteries

A new inexpensive method aimed at distinguishing the forms in which Li⁺ remains irreversibly trapped within composite silicon-based anodes was suggested and tested. It includes a life-cycle test at a fixed degree of lithiation during the initial cycles. The integral capacity values obtained from the test were then correlated with the various chemical species of Li⁺ present in the electrodes after various cycle numbers in both charged and discharged states. Such a technique may provide a quantitative analytical tool for developing this type of electrode.