Metabolic behavior of denitrifying phosphate-accumulating organisms under nitrate and nitrite electron acceptor conditions

The effects of various types of electron acceptors on anoxic phosphorus uptake were investigated in detail to obtain a better insight into the metabolic behavior of denitrifying phosphate-accumulating organisms. Batch experimental tests under three different electron acceptor conditions, i.e., nitrate, nitrite and mixtures of nitrate and nitrite, were carried out using activated sludge cultivated in a sequencing batch reactor. The experimental results confirmed no inhibition of the utilization of nitrate or nitrite as an electron acceptor for anoxic phosphorus uptake. Anoxic phosphorus uptake occurred provided there was an electron acceptor present regardless of whether it was nitrate or nitrite. However, for nitrite a relatively small amount of anoxic phosphorus was taken up per nitrogen denitrified compared to nitrate. On the other hand, the amount of anoxic phosphorus taken up per nitrogen denitrified increased with an increase in the initial loading amount of electron acceptor in the case of nitrate, whereas it slightly decreased nitrite. Moreover, the amount of phosphorus taken up per nitrogen denitrified decreased with increasing mixed liquor suspended solid (MLSS) concentration in the case of nitrate, while it slightly increased for nitrite. From these results, it was confirmed that the activity of anoxic phosphorus uptake is strongly associated with the type and the initial loading amount of electron acceptor and the MLSS concentration under anoxic conditions.     

Effects of casting solvents on characteristics of organic EL devices containing poly(l-glutamate) as hole-transport material

The characteristics of EL devices containing α-helical poly(l-glutamate) and having a carbazole side chain (PCELG) were found to strongly depend on the casting solvents. Among EL devices fabricated using chlorine-containing casting solvents such as 1,2-dichloroethane (DCE), 1,1,2,2-tetrachloroethane (TCE), chloroform (CHCl₃), and monochlorobenzene (?-Cl), the EL device fabricated using the DCE solvent exhibited the maximum luminance (65.8 cd/m²). The difference between the threshold voltages of the devices ranged up to 6.0 V, despite their fabrication by using solutions with the same composition ratio. The maximal efficiency of the devices fabricated using the DCE solvent was found to be 20 times greater than that of the devices fabricated using TCE solvents. A comparison of the current densities and voltages among devices fabricated using different casting solvents at their maximal efficiencies showed that the maximal efficiencies tended to significantly increase in the order TCE < CHCl₃ < DCE solvents at similar voltages (～15 V), despite a lowering of the current density. The current density was considered to be directly related to the number of carriers injected into the device. The above-mentioned observations suggested that the maximal efficiency in these devices was not the hole and electron injection efficiencies, but the values of some parameters subsequent to carrier injection, such as the recombination rate, amount of excitons generated, and the diffusion length.     

Investigation of localized deformation in partially saturated sand under triaxial compression using microfocus X-ray CT with digital image correlation

In this paper, localized deformation in partially saturated sand was investigated quantitatively using microfocus X-ray computed tomography (CT) and an image analysis of the CT images. Triaxial compression tests on a partially saturated dense Toyoura sand specimen were carried out under a low confining pressure and under drained conditions for both air and water. The development of localized deformation was observed macroscopically using microfocus X-ray CT, and the displacement field over the entire specimen was quantified by an image analysis of the CT images with the digital image correlation (DIC) technique. The progressive development of shear bands is discussed with reference to these images. In addition, the region of localization was observed microscopically by partial CT scanning on a micron scale with high spatial resolution. Changes in the particulate structures are also discussed herein. The DIC image analysis of the partial CT images provided a microscopic displacement field and indicated that very fine localized shear deformation developed before the shear bands had become visible in the macroscopic investigation.     

Response speed and optical investigation of inGaN/gaN multiple quantum well light‐emitting diodes (LED)

Transmission experiments for a local area network (LAN) using blue‐light‐emitting diodes (LEDs) with InGaN/GaN multiple quantum well (MQW) and plastic optical fibers (POFs) have been conducted. Audio analog signals have been transmitted up to 1800 kHz, which corresponds to an optical 1.5 dB bandwidth of LED response. The response speed of these diodes has been investigated by varying the operating conditions: dc bias, pulse amplitude, and pulse shape. The LED rise time is reduced from 0.26 μs to 0.19 μs by changing the electrical pulse amplitude from 0.5 V to 1.2 V, whereas the fall time (0.20 μs) does not change. On the other hand, the fall time is reduced from 0.20 μs to 0.14 μs by adding negative pulses after the applied positive pulses. It is shown that the direct‐modulation speed of these diodes is limited by the time constant associated with device capacitance. Electroluminescence and photocurrent spectra of the LEDs were also investigated; blueshifts were observed for both peaks in the spectra. © 2001 Scripta Technica, Electr Eng Jpn, 137(3): 47–51, 2001     

Design and performance evaluation of a haptic interface based on MR fluids for endovascular tele-surgery

Microsystem Technologies - In this paper, a magnetorheological (MR) fluids based haptic interface has been developed in master site to provide the haptic sensation to the interventionalist during...     

Numerical study on the evaporative and condensational dissipation of phosphoric acid in PAFC

In phosphoric acid fuel cell (PAFC) stack, reduction of the phosphoric acid that is impregnated in the cell is a major factor to restrict the operating life. In this paper, the phosphoric acid reduction by the evaporative and condensational dissipation was evaluated by numerical analysis. The calculations that include the behavior of heat transfer, gas flow, and evaporation and condensation of phosphoric acid were conducted for the model cell with conditions that correspond to an on site stack. The phosphoric acid was considered as a composite of phosphorus pentoxide and water, and the evaporation and condensation rates were derived based on the nucleation theory for a two components system. The phosphoric acid distributions in the vapor phase and liquid phase at the process gas and electrode were calculated for the duration of 3300 h, and as a result of those, the exhausting and remaining amount of phosphoric acid for the cell were evaluated. The analysis results were compared with the experimental results for the model cell.     

Kinetic characterization of the deproteinization of trabecular and cortical bovine femur bones

The present study proposes an interpretation of the mechanism of bone deproteinization. Cortical and trabecular bovine femur bones were deproteinized using 6% NaOCl (37, 50, 60 °C). The kinetic parameters (rate constant and activation energy) were calculated, and the surface area of each type of bone was considered. A statistical analysis of the rate constants shows that cortical bone deproteinizes at a lower rate than trabecular. The activation energy is higher for trabecular than cortical bone, and no significant differences are found in the protein concentration values for both bones. Therefore, although trabecular bone deproteinizes at a higher rate than cortical, trabecular bone requires more energy for the deproteinization reaction to take place. Considering that both types of bones are constituted by mineral, protein, and water; the present work shows that the individual inner matrix architecture of trabecular and cortical bones, along with characteristics such as the mineral concentration and its bonding with collagen fibers, may be the responsible factors that control protein depletion.     

Effect of aluminium content on penetration shape of stainless steel in TIG arc welding. Effect of chemical composition on weldability in fabrication of high‐alloyed steel (3rd report)

Summary

Accurate measurement of temperature is of considerable importance in materials processing, such as welding, thermal cutting, and heat treatment of metals. Radiation thermometry has a distinct advantage over other temperature detection methods, since it requires no physical contact with the work. The reliability of thermometry, however, is limited if the emissivity of the work to be measured is not accurately known.

Planck's law of radiation shows that the effect of temperature on the spectral radiance is greater at shorter wavelengths. The present paper experimentally describes the characteristics of UV (ultraviolet) thermometry. A temperature measurement test by the UV spot sensor (spectral range: 0.25 μm) shows that the melting point of Ni can be measured with an accuracy of ± 1 % regardless of any emissivity fluctuation. The CCD camera with UV filter used in this investigation makes it possible to detect the temperature image on the work in welding virtually independently of the emissivity of the object.     

Persistence and partitioning of eight selected pharmaceuticals in the aquatic environment: Laboratory photolysis, biodegradation, and sorption experiments

We selected eight pharmaceuticals with relatively high potential ecological risk and high consumption—namely, acetaminophen, atenolol, carbamazepine, ibuprofen, ifenprodil, indomethacin, mefenamic acid, and propranolol—and conducted laboratory experiments to examine the persistence and partitioning of these compounds in the aquatic environment. In the results of batch sunlight photolysis experiments, three out of eight pharmaceuticals—propranolol, indomethacin, and ifenprodil—were relatively easily photodegraded (i.e., half-life < 24 h), whereas the other five pharmaceuticals were relatively stable against sunlight. The results of batch biodegradation experiments using river water suggested relatively slow biodegradation (i.e., half-life > 24 h) for all eight pharmaceuticals, but the rate constant was dependent on sampling site and time. Batch sorption experiments were also conducted to determine the sorption coefficients to river sediments and a model soil sample. The determined coefficients (K_d values) were much higher for three amines (atenolol, ifenprodil, and propranolol) than for neutral compounds or carboxylic acids; the K_d values of the amines were comparable to those of a four-ring polycyclic aromatic hydrocarbon (PAH) pyrene. The coefficients were also higher for sediment/soil with higher organic content, and the organic carbon-based sorption coefficient (log K_oc) showed a poor linear correlation with the octanol-water distribution coefficient (log D_ow) at neutral pH. These results suggest other sorption mechanisms—such as electrochemical affinity, in addition to hydrophobic interaction—play an important role in sorption to sediment/soil at neutral pH.     

Short track seeking of hard disk drives under multirate control-computationally efficient approach based on initial value compensation

This paper proposes a design method for short track-seeking control based on one degree of freedom (ODOF) control and initial value compensation (IVC). IVC uses nonzero initial values of the feedback controller to improve the step reference response of the ODOF tracking control system. This makes feedforward control unnecessary to shape the transient response of short track seeking. As a result, the amount of computation during short track seeking may be minimal. The proposed design method minimizes tracking errors in multirate control framework for a step reference input taking into account the inter-sampling behavior. The effectiveness of the proposed method is shown by simulation and experiment.