连续冶炼冶金焦工艺初探──（Ⅰ）现状分析和连续混热式焦炉的结构

本文论述了炼焦工艺的现状和发展方向，分析了存在的问题，提出了一种全新的连续型混热式冶金焦炉结构及其工艺流程，为焦化工业的发展探讨了一条新的途径。     

Synthesis of Biodiesel from Soybean Oil using Heterogeneous KF/ZnO Catalyst

Biodiesel was produced by transesterification of soybean oil with methanol using ZnO loaded with KF as a solid base catalyst. It was found that the catalyst with 15 wt.% KF loading and calcined at 873 K showed the optimum activity. XRD, IR and Hammett indicator method were employed for the catalyst characterization. The results showed the activity of the catalysts was correlated with their basicity. The influence of various reaction variables on the conversion was also discussed.     

石灰石在煤气化过程中的催化和固硫作用

基于CaO在煤气化中的催化和固硫作用,以及石灰石加热分解的性质,石灰石有可能作为煤气化过程中的催化剂和固硫剂。本文根据国内外对石灰石在煤燃烧和煤气化中作用的研究,从石灰石结构、Ca/C,Ca/S,可能的反应机理等几个方面进行了介绍和分析,并指出需进一步研究的内容。     

Reaction kinetics study of asymmetric polymer-polymer interface

In this study, the reaction kinetics of asymmetric polymer-polymer interface was experimentally and theoretically studied. A new rheological method correlating the change of rheological property of reactive system with the conversion of the in situ formed copolymers was applied to study the reaction kinetics of PBT/epoxy reactive system. Then, the new method was proved to be useful by comparing its results with that obtained from the conventional endgroup determination method. Moreover, the conversion of PBT/epoxy reactive system from rheological method could be well fitted by the numerical analysis, from which the kinetic constant and the diffusion constant of epoxy in PBT could be determined simultaneously.     

Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

Supported Vanadia Catalysts for Dehydrogenation of Ethylbenzene with CO2

Alumina supported vanadia catalysts (V/Al) for selective oxidehydrogenation of ethylbenzene with CO₂ were prepared by impregnation method. During preparation the effect of promoters and calcined temperature was investigated, it was found these two items had a strong influence on the activity of V/Al catalysts. Dehydrogenation reaction with CO₂ was happened in the fixed-bed reactor at 450 °C. Results showed that 15.2% ethylbenzene conversion and 99.2% styrene selectivity were acquired when V₂K/Al catalyst was used.     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

Direct synthesis of electrorheological suspension containing salt of poly(methacrylic acid) and its electrorheological effect

Colloidal suspensions containing salts of poly(methacrylic acid) which exhibit high electrorheological (ER) activity were synthesized by inverse emulsion polymerization. Factors influencing the ER effect were studied. The results showed that maximum yield stress occurred at optimum amounts of both polymeric stabilizer and crosslinking agent used in the inverse emulsion polymerization as well as a certain water content of the particles, while yield stress increased with electric field strength, average diameter of the particles below 0.9 μm, or the molar ratio of the salt to the acid. The ER activity for the suspensions containing different monovalent counter ions decreased in the following order: Li⁺ > Na⁺ > K⁺ > NH₄⁺. The phenomena were discussed with the ionic polarization mechanism. © 1995 John Wiley & Sons, Inc.