Novel Core Structure and Iron‐Loss Modeling for Contactless Power Transfer System of Electric Vehicle

A contactless power transfer system for electric vehicles must have high efficiency, a large air gap, good tolerance to misalignment in the lateral direction, compactness, and light weight. In this paper, a new 1.5‐kW transformer has been developed using a novel H‐shaped core which is more efficient, more robust to misalignment, and lighter than previous rectangular cores, to satisfy these criteria, and its characteristics are described. An efficiency of 95% was achieved across a 70‐mm mechanical gap. Iron‐loss modeling of the equivalent circuit is also presented. The calculated efficiency using this model shows good agreement with experimental results. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 184(2): 61–70, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22377     

Bending properties of compressed wood impregnated with?phenolic resin through drilled holes

The effect of drilling on the permeability of Japanese cedar and the bending properties of resin treated compressed wood were examined. Compressed wood was manufactured by impregnating aqueous phenolic resin solutions into the heartwood through drilled holes and polymerizing the impregnated resins using a hot press to maintain the deformation. The compressive deformation was carried out at 150°C for 1 h to one-half of the original specimen thickness. A dye solution permeated the entire specimen when the density of drilled holes exceeded approximately 5000?holes/m². When the compressed wood was manufactured under the drilling condition, the resin type was found to greatly affect the bending strength and the failure mode of the specimens in bending test.     

Tool for inspecting faults from incorrectly cleaved fiber ends and contaminated optical fiber connector end surfaces

We investigated and analyzed faults in field installable connection due to incorrectly cleaved fiber ends and manufactured physical contact (PC)-type connectors with contaminated end surfaces in optical access fiber networks. The insertion and return losses of fiber connections using incorrectly cleaved fiber ends might be at worst more than 40 dB and less than 30 dB, respectively. With PC-type connectors whose end surfaces are contaminated, the insertion and return losses might be at worst 8.7 and 27 dB, respectively. We developed an inspection tool for cleaved fiber ends and connector end surfaces as a countermeasure. The proposed tool has a simple structure and does not require focal adjustment. It can be used to inspect and clearly determine whether a fiber has been cleaved correctly and whether there is contamination or scratches on the connector end surfaces. The tool requires a slight increase of 11% in operation time compared to conventional fiber end preparation and assembly procedures. The proposed tool provides a simple and cost-effective way to inspect cleaved fiber ends and connector end surfaces and is suitable for field use.     

Isolation of genes coding for chitin-degrading enzymes in the novel chitinolytic bacterium, Chitiniphilus shinanonensis, and characterization of a gene coding for a family 19 chitinase

Chitiniphilus shinanonensis type strain SAY3(T) is a strongly chitinolytic bacterium, originally isolated from the moat water in Ueda, Japan. To elucidate the chitinolytic activity of this strain, 15 genes (chiA-chiO) coding for putative chitin-degrading enzymes were isolated from a genomic library. Sequence analysis revealed the genes comprised 12 family 18 chitinases, a family 19 chitinase, a family 20 β-N-acetylglucosaminidase, and a polypeptide with a chitin-binding domain but devoid of a catalytic domain. Two operons were detected among the sequences: chiCDEFG and chiLM. The gene coding for the polypeptide (chiN) showed sequence similarity to family 19 chitinases and was successfully expressed in Escherichia coli. ChiN demonstrated a multi-domain structure, composed of the N-terminal, two chitin-binding domains connected by a Pro- and Thr-rich linker, and a family 19 catalytic domain located at the C-terminus. The recombinant protein rChiN catalyzed an endo-type cleavage of N-acetyl-d-glucosamine oligomers, and also degraded insoluble chitin and soluble chitosan (degree of deacetylation of 80%). rChiN exhibited an inhibitory effect on hyphal growth of the fungus Trichoderma reesei. The chitin-binding domains of ChiN likely play an important role in the degradation of insoluble chitin, and are responsible for a growth inhibitory effect on fungi.     

Diurnal variations in H2O2, O3, PAN, HNO3 and aldehyde concentrations and NO/NO2 ratios at Rishiri Island, Japan: potential influence from iodine chemistry

The presence of iodine chemistry, hypothesized due to the overprediction of HO(2) levels by a photochemical box model at Rishiri Island in June 2000, was quantitatively tested against the observed NO/NO(2) ratios and the net production rates of ozone. The observed NO/NO(2) ratios were reproduced reasonably well by considering the conversion of NO to NO(2) by IO, whose amount was calculated so as to reproduce the observed HO(2) levels. However, the net production rates of ozone were calculated to be negative when such high mixing ratios of IO were considered, which was inconsistent with the observed buildup of ozone during daytime. These results suggest that iodine chemistry may not be the sole mechanism for the reduced mixing ratios of HO(2), or that "hot spots" for iodine chemistry were present. Diurnal variations in the mixing ratios of HCHO, CH(3)CHO, peroxy acetyl nitrate (PAN) and HNO(3) observed during the study are presented along with the simulated ones. The box model simulations suggest that the effect of iodine chemistry on these concentrations is small and that important sources of CH(3)CHO and sinks of PAN are probably missing from our current understanding of the tropospheric chemistry mechanism.     

Structural and electronic impact of SrTiO3 substrate on TiO2 thin films

We demonstrate that the atomic structures, electronic states, and bonding nature of the interface between SrTiO₃ substrate and anatase TiO₂ thin films could be related and technologically manipulated at the atomic level. Applying advanced transmission electron microscopy, the grown anatase TiO₂ thin films are found to make a clean and direct contact to the SrTiO₃ substrates in an epitaxial, coherent, and atomically abrupt way. The atomic-resolution microscopic images reveal that the interface comprises SrO-terminated SrTiO₃ and Ti-terminated TiO₂ with the interfacial Ti of TiO₂ sitting above the hollow site, which is confirmed theoretically to be the most energetically favorable. Quantitatively, the first-principles calculations predict that the oxygen sublattice at the interface undergoes a notable reconstruction, i.e., the interfacial O atoms of TiO₂ are displaced largely toward the SrO plane of the SrTiO₃, flattening the originally zigzag TiO₂ atomic chains. Consequently, the interfacial layers suffer a remarkable modification in the charge accumulation and also a deviation in the density of states from their bulk counterparts, indicating that the substrate can have an impact on the deposited thin films electronically. Using several analytic methods, the SrTiO₃/TiO₂ interface is found to take on a metallic nature, and the interfacial bonding is determined to be of a mixed covalent and ionic character. This combined experimental and theoretical investigation gains insight into the complex atomic and electronic structures of the buried interface, which are fundamental for relating the atomic-scale structures to their properties on a quantum level.     

In Vitro Tumor Cell-Binding Assay to Select High-Binding Antibody and Predict Therapy Response for Personalized 64Cu-Intraperitoneal Radioimmunotherapy against Peritoneal Dissemination of Pancreatic Cancer: A Feasibility Study

Peritoneal dissemination of pancreatic cancer has a poor prognosis. We have reported that intraperitoneal radioimmunotherapy using a ⁶⁴Cu-labeled antibody (⁶⁴Cu-ipRIT) is a promising adjuvant therapy option to prevent this complication. To achieve personalized ⁶⁴Cu-ipRIT, we developed a new in vitro tumor cell-binding assay (⁶⁴Cu-TuBA) system with a panel containing nine candidate ⁶⁴Cu-labeled antibodies targeting seven antigens (EGFR, HER2, HER3, TfR, EpCAM, LAT1, and CD98), which are reportedly overexpressed in patients with pancreatic cancer. We investigated the feasibility of ⁶⁴Cu-TuBA to select the highest-binding antibody for individual cancer cell lines and predict the treatment response in vivo for ⁶⁴Cu-ipRIT. ⁶⁴Cu-TuBA was performed using six human pancreatic cancer cell lines. For three cell lines, an in vivo treatment study was performed with ⁶⁴Cu-ipRIT using high-, middle-, or low-binding antibodies in each peritoneal dissemination mouse model. The high-binding antibodies significantly prolonged survival in each mouse model, while low-and middle-binding antibodies were ineffective. There was a correlation between in vitro cell binding and in vivo therapeutic efficacy. Our findings suggest that ⁶⁴Cu-TuBA can be used for patient selection to enable personalized ⁶⁴Cu-ipRIT. Tumor cells isolated from surgically resected tumor tissues would be suitable for analysis with the ⁶⁴Cu-TuBA system in future clinical studies.     

Effect of Graphite Nodule Diameter on Water Embrittlement of Austempered Ductile Iron

DuctileironwasdevelopedbyMorrogh[1]in 1940s.Theappearanceofaustemperedductileiron (ADI)in1970sessentiallyaffectedthemetallurgical researchofductileiron[2,3].ADIhasverygood properties[4-15].Itisproducedbyaustemperingcon ventionalductileiron,andthemicrostr…     

The role of wingbeat frequency and amplitude in flight power

Body-mounted accelerometers provide a new prospect for estimating power use in flying birds, as the signal varies with the two major kinematic determinants of aerodynamic power: wingbeat frequency and amplitude. Yet wingbeat frequency is sometimes used as a proxy for power output in isolation. There is, therefore, a need to understand which kinematic parameter birds vary and whether this is predicted by flight mode (e.g. accelerating, ascending/descending flight), speed or morphology. We investigate this using high-frequency acceleration data from (i) 14 species flying in the wild, (ii) two species flying in controlled conditions in a wind tunnel and (iii) a review of experimental and field studies. While wingbeat frequency and amplitude were positively correlated, R² values were generally low, supporting the idea that parameters can vary independently. Indeed, birds were more likely to modulate wingbeat amplitude for more energy-demanding flight modes, including climbing and take-off. Nonetheless, the striking variability, even within species and flight types, highlights the complexity of describing the kinematic relationships, which appear sensitive to both the biological and physical context. Notwithstanding this, acceleration metrics that incorporate both kinematic parameters should be more robust proxies for power than wingbeat frequency alone.