啤酒酵母吸附重金属离子铬的研究

将啤酒酵母自制成生物吸附剂，用于吸附重金属离子铬，考察了啤酒酵母吸附Cr^3＋过程中的影响因素，即pH值、初始Cr^3＋质量浓度、吸附时间、菌体浓度及酸碱预处理方法等因素。结果表 明，啤酒酵母对Cr^3＋的吸附量随pH值的增加而增大，吸附的最佳pH值范围是4～7，当pH7时达到吸附最大值；随着初始Cr^3＋质量浓度增加，吸附量有所提高，当溶液初始Cr^3＋质量浓度为80mg／L吸附效果最佳；最佳吸附时间为1h；菌体的最佳浓度为50mg／L；及啤酒酵母经碱处理后吸附量增大：正交试验确定反应时间为反应过程的显著因素，确定啤酒酵母对Cr^3＋的吸附过程遵循Langmuir方程。     

New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.     

SEMICONTINUOUS ETHANOL FERMENTATION WITH SHOCHU DISTILLERY WASTE*

An effective utilization system using distillery waste discharged from Japanese traditional shochu factory was developed. Mugi (barley) shochu distillery waste discharged from a novel vacuum distillation procedure (35–40°C) contained a large number of viable yeast (7 × 10⁶ cells/ml), glucoamylase activity (19.7 units/ml), acid protease activity (940 units/ml), and neutral protease activity (420 units/ml). Ethanol fermentation was achieved with a mash composed of glucose as the sola carbon source and mugi shochu distillery waste. After ethanol fermentation was completed the fermented broth was again distilled at 35–40°C in vacuo and the non volatile residue used in the next ethanol fermentation. In this way, semicontinuous ethanol fermentation system of more than 10 cycles was developed. Even in the distillate of the mash of the 8th fermentation cycle, 7.9% of ethanol, 33.0 ppm of ethyl acetate, 28.5 ppm of isobutyl alcohol, and other aromatic compounds were present. A semicontinuous ethanol fermentation system has been developed for shochu distillery waste which conventionally is treated as wastewater.     

Arsenate adsorption mechanisms at the allophane-water interface

We investigated arsenate (As(V)) reactivity and surface speciation on amorphous aluminosilicate mineral (synthetic allophane) surfaces using batch adsorption experiments, powder X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The adsorption isotherm experiments indicated that As(V) uptake increased with increasing [As-(V)]0 from 50 to 1000 microM (i.e., Langmuir type adsorption isotherm) and that the total As adsorption slightly decreased with increasing NaCl concentrations from 0.01 to 0.1 M. Arsenate adsorption was initially (0-10 h) rapid followed by a slow continuum uptake, and the adsorption processes reached the steady state after 720 h. X-ray absorption spectroscopic analyses suggest that As(V) predominantly forms bidentate binuclear surface species on aluminum octahedral structures, and these species are stable up to 11 months. Solubility calculations and powder XRD analyses indicate no evidence of crystalline Al-As(V) precipitates in the experimental systems. Overall, macroscopic and spectroscopic evidence suggest that the As(V) adsorption mechanisms at the allophane-water interface are attributable to ligand exchange reactions between As-(V) and surface-coordinated water molecules and hydroxyl and silicate ions. The research findings imply that dissolved tetrahedral oxyanions (e.g., H2PO42- and H2AsO4(2-)) are readily retained on amorphous aluminosilicate minerals in aquifer and soils at near neutral pH. The inner-sphere adsorption mechanisms might be important in controlling dissolved arsenate and phosphate in amorphous aluminosilicate-rich low-temperature geochemical environments.     

Antibacterial action on pathogenic bacterial spore by green tea catechins

Antibacterial effects of catechins, the major green tea polyphenols, were studied using Clostridium and Bacillus spores. Incubation with crude catechins decreased the number of C botulinum and C butyricum spores but not B cereus spores. Furthermore, the effects of six catechin derivatives on spores were investigated. (−)‐Epicatechin gallate (ECg), (−)‐epigallocatechin (EGC), (−)‐epigallocatechin gallate (EGCg) and (+)‐gallocatechin gallate (GCg) were more effective in decreasing C botulinum and C butyricum spore numbers than (+)‐catechin (C) and (−)‐epicatechin (EC). The vegetative growth of C botulinum and B cereus was inhibited by crude extracts of the catechins. Specifically, purified GCg and EGCg inhibited the vegetative growth of C botulinum and B cereus. The inhibitory effect of ECg on B cereus was similar to that of GCg. However, toxin‐production by B cereus was not inhibited by catechin. Damage to the membrane of C butyricum spores by catechin derivatives was shown using fluorescent microscopy. This study shows that low concentrations of catechins, although requiring a long exposure time, inhibited the growth of bacterial spores. However, the effects of the purified derivatives of the catechins were not the same and GCg and EGCg were found to be the most potent. Spores that are generally resistant to many disinfectants were sensitive to catechins. Copyright © 2005 Society of Chemical Industry     

An analysis of Pascal programs in compiler writing

A method and results of static and dynamic analysis of Pascal programs are described. In order to investigate characteristics of large systems programs developed by the stepwise refinement programming approach and written in Pascal, several Pascal compilers written in Pascal were analysed from both static and dynamic points of view. As a main conclusion, procedures play an important role in the stepwise refinement approach and implementors of a compiler and designers of high level language machines for Pascal-like languages should pay careful attention to this point. The set data structure is one of the characteristics of the Pascal language and statistics of set operations are also described.     

Purification and some properties of cholesterol oxidase stable in detergents from gamma-proteobacterium Y-134

Cholesterol oxidase (CHO) with high stability in detergents was found from an isolated strain, Y-134, belonging to the gamma-subclass of Proteobacteria. CHO production reached its maximum by incubation at 30 degrees C for 12 d. It was purified from cell-free extract prepared by mixing the cells with 0.4% Triton X-100. The absorption spectrum of the purified enzyme exhibited maxima at 274 and 410 nm, and a shoulder at 330 nm. The molecular mass was 115 kDa with two identical subunits of 58 kDa. The enzyme oxidized cholest-5-en-3beta-ol (cholesterol) and 5alpha-cholestan-3beta-ol (dihydrocholesterol) at a high reaction rate, and the K(m) value for cholesterol was 65 microM. The stability of the enzyme was higher than other CHOs in nonionic detergents with high values of hydrophilelipophile balance (HLB) such as Triton X-450 and sodium cholate. NH2-terminal sequence analysis showed a high similarity to CHO from Burkholderia cepacia, but not to CHOs from Streptomyces or Brevibacterium.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Microbial synthesis and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Microbial synthesis of copolymers of [R]-3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB), P(3HB-co-4HB), by Alcaligenes eutrophus, Alcaligenes latus, and Comamonas acidovorans from various carbon sources has been studied. The copolyester compositions varied from 0 to 100 mol% 4HB, depending on the microorganism and the combination of carbon substrates supplied. The thermal and physical properties of compositions with 0–100 mol% 4HB were investigated. The copolyesters represented a wide variety of polymeric materials, from hard crystalline plastic to very elastic rubbers, depending on composition. The copolyester films with high 4HB fractions (64–100 mol% 4HB) exhibited the characteristics of a thermoplastic elastomer, and the tensile strength increased from 17 to 104 MPa as the 4HB fraction increased. The enzymatic degradation of P(3HB-co-4HB) films was studied in an aqueous solution of extracellular polyhydroxybutyrate (PHB) depolymerase from Alcaligenes faecalis or lipase from Rhizopus delemer. The erosion rate of P(3HB-co-4HB) films was strongly dependent on the copolymer composition. In addition, environmental degradation of P(3HB-co-4HB) films in sea water was investigated.     

Monitoring cure viscosity of epoxy composite

Viscosity is an important process variable that should be monitored and controlled to ensure the consistent and reliable production of graphite-fiber-reinforced composite parts by the autoclave/vacuum bag process. Unfortunately, no technique is currently known for the direct measurement of viscosity in this process. However, d.c. conductivity and a.c. phase lag appear to correlate quite well with viscosity, and either electrical property may be followed in order to indirectly monitor viscosity. As the method of measuring d.c. conductivity is so inexpensive, simple, and almost free of electrical interference compared to the method of measuring a.c. phase lag, it appears to be the method of first choice for application in an autoclave environment.