薄壁曲线箱梁材料非线性分析的内力塑性系数法

目的 研究薄壁曲线箱梁考虑剪力滞效应和材料非线性的计算方法.方法 基于势能变分原理,推导了薄壁曲线箱梁的刚度方程.采用变刚度初法应力法,并结合截面内力塑性系数修正刚度系数,对薄壁曲线箱梁的材料非线性问题进行了求解.结果 通过算例计算,得到了曲线箱梁顶底板的应力分布以及挠度和扭转角的变化曲线.结论 笔者的计算结果与试验值整体吻合较好.对于薄壁曲线箱梁,悬臂板、顶板和底板,分别取三个不同的剪力滞翘曲位移函数的结果,精度优于三者取一个统一的剪力滞翘曲位移函数;随荷载的增加,弯曲剪力滞效应系数较挠度和扭转角更早进入非线性状态,翼缘截面上的应力分布逐渐趋于均匀,上翼缘应力的这种变化趋势要略滞后于下翼缘,而中支座截面翼缘应力的这种变化趋势则略快于左跨跨中和右跨跨中截面.     

基于6-DOF解耦操作臂的空间遥操作控制及运动学分析

针对由6-DOF解耦操作臂及其末端手爪组成的操作臂系统,设计了符合工程实际的遥操作控制策略,并提出了一种简单的运动学解算方法.采用Motoman工业操作臂,对提出的方法进行了实验验证.实验结果证明了所提方法的可行性.     

Agglomeration control of hydroxyapatite nano-crystals grown in phase-separated microenvironments

Materials synthesis processes that require high temperatures consume large quantities of energy that generate an environmental burden. We attempted to synthesize hydroxyapatite (HAp) nano-crystals without firing or melting. “Water in oil” (W/O) emulsions were employed as microreactors for HAp formation. The surfactant-bounded water mediated HAp crystal nucleation, and HAp nano-crystallites were obtained. The obtained particles were aggregates composed of plate-like nano-crystals and monodisperse tiny crystals. Utilization of the W/O emulsions resulted in tunable nucleation frequency and the reactant provision, and yielded HAp nano-crystals with characteristic agglomeration properties.     

Surface modification of biodegradable plastics by ion beams

Biodegradable plastics can be used as conventional plastics, while on disposal they decompose to water and carbon dioxide by microorganisms existing in natural environment. Products using biodegradable plastics have recently been developed in many companies pursuing ecology. In this study, surface modification of biodegradable plastics was carried out by inert ion beams for improvement of photo deterioration under an ultraviolet ray. The hardness of biodegradable plastics tended generally to decrease with irradiation of an ultraviolet ray. In this method, the hardness of ion-bombarded biodegradable plastics was kept at an initial value under an ultraviolet ray, because the modified layer by ion bombardment intercepted an ultraviolet ray. The hardness of He⁺ ion-bombarded biodegradable plastics showed larger value than that of Ar⁺ ion bombardment. He⁺ ion bombardment at ion energy of 10 keV produced the suitable property with both of high transmittance of a visible ray and high interception of an ultraviolet ray in a surface layer of biodegradable plastics.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Advanced resonant ultrasound spectroscopy for measuring anisotropic elastic constants of thin films

This paper presents an advanced resonant ultrasound spectroscopy (RUS) method to determine the elastic constants C_ij of thin films. Polycrystalline thin films often exhibit elastic anisotropy between the film growth direction and the in‐plane direction, and they macroscopically show five independent elastic constants. Because all of the C_ij of a deposited thin film affect the mechanical resonance frequencies of the film/substrate layer specimen, measuring resonance frequencies enables one to determine the C_ij of the film with known density, dimensions and the C_ij of the substrate. Resonance frequencies have to be measured accurately because of low sensitivity of the C_ij of films to them. We achieved this by a piezoelectric tripod. Mode identification has to be made unambiguously. We made this measuring displacement–amplitude distributions on the resonated specimen surface by laser Doppler interferometry. We applied our technique to copper thin film and diamond thin film. They show elastic anisotropy and the C_ij smaller than bulk values of C_ij. Micromechanics calculations indicate the presence of incohesive bonded regions.     

The characteristics of the external‐electrode mercury fluorescent lamp for backlighting liquid‐crystal‐television displays

Abstract— A reliable external‐electrode mercury fluorescent lamp (EEFL) has been developed for backlighting a liquid‐crystal‐television (LC‐TV) display. This involved the investigation of the EEFL characteristics and the improvement in the construction of the EEFL and drive waveforms, in the frequency range of 50–200 kHz, that affects the EEFL characteristics. The results showed that a sinusoidal waveform is suitable for driving the EEFL, and EEFL's voltage decreases when the frequency of the drive waveform is increased.     

Thermal behaviour and particle size evaluation of primary clusters in a water-based magnetic fluid

This paper reports the experimental research on thermal behaviour and particle size evaluation of primary clusters of ferromagnetic nano-particles in a water-based magnetic fluid. The magnetic fluids are suspensions of ultra fine particles coated with a molecular layer of dispersant in a liquid carrier such as water or kerosene. The particles are coated with single- or double-layer of surfactant to achieve stable dispersion. Numerous experimental studies have indicated the existence of the primary cluster of ferromagnetic nano-particles in a water-based magnetic fluid. The purpose of this research is to evaluate the particle size of the primary clusters by applying the Einstein's equation for Brownian motion assuming that the primary cluster has a spherical-shape. The thermal behaviour of ferromagnetic nano-particles in magnetic fluids is investigated through the micro visualization using the optical darkfield microscope system and particle tracking velocimetry data processing system. Real-time visualization of the Brownian motion of primary clusters in a water-based magnetic fluid was carried out. The experimental results clarified that the primary cluster size depends upon the concentration of the ferromagnetic nano-particle in the magnetic fluid.     

The Atmospheric Scanning Electron Microscope with open sample space observes dynamic phenomena in liquid or gas

Although conventional electron microscopy (EM) requires samples to be in vacuum, most chemical and physical reactions occur in liquid or gas. The Atmospheric Scanning Electron Microscope (ASEM) can observe dynamic phenomena in liquid or gas under atmospheric pressure in real time. An electron-permeable window made of pressure-resistant 100 nm-thick silicon nitride (SiN) film, set into the bottom of the open ASEM sample dish, allows an electron beam to be projected from underneath the sample. A detector positioned below captures backscattered electrons. Using the ASEM, we observed the radiation-induced self-organization process of particles, as well as phenomena accompanying volume change, including evaporation-induced crystallization. Using the electrochemical ASEM dish, we observed tree-like electrochemical depositions on the cathode. In silver nitrate solution, we observed silver depositions near the cathode forming incidental internal voids. The heated ASEM dish allowed observation of patterns of contrast in melting and solidifying solder. Finally, to demonstrate its applicability for monitoring and control of industrial processes, silver paste and solder paste were examined at high throughput. High resolution, imaging speed, flexibility, adaptability, and ease of use facilitate the observation of previously difficult-to-image phenomena, and make the ASEM applicable to various fields.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.